• The Journal of Advanced Prosthodontics
• /
• v.14 no.2
• /
• pp.122-132
• /
• 2022

PURPOSE. This in-vitro analysis aimed to compare the intaglio trueness, the antagonist's wear volume loss, and fracture load of various single-unit zirconia prostheses fabricated by different manufacturing techniques. MATERIALS AND METHODS. Zirconia crowns were prepared into four different groups (n = 14 per group) according to the manufacturing techniques and generations of the materials. The intaglio surface trueness (root-mean-square estimates, RMS) of the crown was measured at the marginal, axial, occlusal, and inner surface areas. Half of the specimens were artificially aged in the chewing simulator with 120,000 cycles, and the antagonist's volume loss after aging was calculated. The fracture load for each crown group was measured before and after hydrothermal aging. The intaglio trueness was evaluated with Welch's ANOVA and the antagonist's volume loss was assessed by the Kruskal-Wallis tests. The effects of manufacturing and aging on the fracture resistance of the tested zirconia crowns were determined by two-way ANOVA. RESULTS. The trueness analysis of the crown intaglio surfaces showed surface deviation (RMS) within 50 ㎛, regardless of the manufacturing methods (P = .053). After simulated mastication, no significant differences in the volume loss of the antagonists were observed among the zirconia groups (P = .946). The manufacturing methods and simulated chewing had statistically significant effects on the fracture resistance (P < .001). CONCLUSION. The intaglio surface trueness, fracture resistance, and antagonist's wear volume of the additively manufactured 3Y-TZP crown were clinically acceptable, as compared with those of the 4Y- or 5Y-PSZ crowns produced by subtractive milling.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.230-237
• /
• 2005

In this paper, we are suggested a method that's a major topics in sports medicine. It is disease control, control and management of chronic degenerative disease, and promotion of health. We are analyze physical activity to scientific and quantitative a trainee at Wu-Shu gymnasium, for a suggested method. We are measured a quantity of physical activity by SenseWear-PRO2-Armband which develop body-media company. Armband include to skin temperature sensor, near-body temperature sensor, accelerometer, heat flux sensor, galvanic skin response sensor. Acquired data was recorded to storage in Armband. We are analyzed using InnerView Wearer Software in the Stored data to skin temperature, calorie expenditure, quantity of physical activity. The result of this analyzed, we are know that a man of long-term exercise expenditure energy at short time and if liveliness of physical activity was Increase in expenditure energy with increase skin temperature. Also, we are know that the heat flux after increase expenditure energy with increase skin temperature. And, know that GSR was not affected a factors that physical activity, expenditure energy, increase skin temperature, and others.

• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.72-86
• /
• 2002

Recently the fashion design has been expressed mixing trend of antipodal concept. There are shown disorganization of existing standard with eclectism, pursued more sensational fashion by the sense of unease. And there are spreaded body exposure in producing on a commercial scale for sex, are shown the phenomenon by wearing innovation inner-wear in private area are exposed out. The purpose of this study are to consider preponderantly the fashion design using corset, shown up as the motive of costume design from 1990's to 2002's, define the character of molding. and extend the width of understanding of modern fashion. The results of the study are as follows: 1. The trend of deconstructionism as one line of fashion world in the 1990's make into outer garment of inner-wear, corset has been using the main item of infra costume. The past corset was existed innerwear, but it is revived various forms by transforming outer garment of body expression consciously. 2. Corset look is shown double faced factory of the beauty of tradition and decadence, vulgarity and nobility, concealment and exposure, and are expressed boldly the free consciousness outer about woman's sex with the improvement of woman's social position. 3. The molding character of Corset look divided Eroticism, Fetishism, Deconstructionism. Futurism. The trend of Corset look design is the emphasized sexual part of lace-up and cutting line of corset, and various details of see-through, kitsch, glitter look. Therefore, the trend of Corset look will be applied the modern fashion and used as motif of new design, affected the inspiration of more developed design with grafting of up-to-date fabrics and processing technique.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1267-1274
• /
• 2012

A guide vane plays a key role in controlling the flow rate of water supplied to the turbine of a hydropower plant. It has been reported that guide vane bearing bushings are subjected to considerable wear, which requires them to be maintained. An ancillary service such as frequency control and black start causes cyclic low opening operation of the guide vanes. It is empirically well known that such operation increases the wear rate of the guide vane bearing bushing. In this study, the effect of low opening operation on the increasing wear of the guide vane bearing bushing is quantitatively assessed via finite element flow analysis, finite element stress analysis, and relative wear evaluation. As a result of the assessment, it is identified that the pressure applied on the guide vane surface increases and the contact length between the outer surface of the guide vane stem and the inner surface of the bearing bushing decreases with a decrease in the opening of the guide vane. In addition, low opening of the guide vanes results in an increase in the relative wear owing to the generation of high contact pressure on the bearing bushing surfaces.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.90-96
• /
• 1998

The ductile cast iron is austempered at 300, 350 and 40$0^{\circ}C$ temperature in order to investigate the basic factors for monitoring drill wear in automatic production process, and cutting force and AE RMS signals are measured with changing cutting condition for ADI(Austempered Ductile Cast Iron) with different mechanical properties. The signals of cutting force were influenced by cutting speed and feedrate greatly. On the other hand AE RMS signals are influenced by cutting speed where as it is not related with feedrate. As the depth of drilling increases, cutting force shows a slow increase and the value of AE RMS increases until the range of h/d=4. But over the range it increases greatly due to an amount of chip discharge and friction with inner wall of drilling hole, etc. As the drill diameter increases at a constant depth of drilling. Cutting force increases linearly, but the level of AE RMS does not increases linearly due to circumferential velocity and great influence of h/d.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.9_10 s.157
• /
• pp.1366-1377
• /
• 2006

The purposes of this study was to find out 1) the difference in the importance degree of store attribute according to interaction between fashion product types and task situations, 2) the difference in the importance degree of store attribute according to the patronized store types on the basis of fashion product types. The subjects were female adults who lived in Seoul. The sampling method was quota sampling. The data was obtained from 391 questionnaires. The data were analyzed using frequency, one-way ANOVA, Duncan test, and two-way ANOVA by means of SPSS. The results were as follows; 1. According to fashion product types and task situations, there were significant differences in factors of product features, services, physical environments of the store, and price. 2. According to interaction between fashion product types and task situations, there were significant differences in factors of product features, services, physical environments of the store, and price. 3. There were significant differences in factors of product features, services, physical environments of the store, and location of store according to patronized store types, when a consumer purchased a suit, casual wear and inner wear.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.145-151
• /
• 2006

Wheel bearing unit has been exclusively applied to car wheel supporting device. The seal for wheel bearing is required to have both high sealing effects and low reaction forces because wheel bearing are operated on adverse environmental conditions such as mud and splash water. High sealing effects are for the protection of bearing ball wear from dust influx. In order to ensure high sealing effects, it is a easiest way to increase contact force which are affected by geometric characteristics, material properties and interferences between seal and inner bearing but induces higher wear phenomena. Interferences in all variables are most important factor to determine the performance of wheel bearing. In this study, optimization of interference amount was performed with finite element analysis with commercial code ABAQUS. For the sake of finite element analysis, tensile tests of rubber material were conducted and governing equation of nonlinear behavior was achieved. Hock-up bearing was manufactured with optimized interference amount. Results of torque and mud spray tests using this bearing unit are performed. Less torque and moisture influx of bearing with optimized interference amount is evidence to validity of this study.

• Korean Journal of Human Ecology
• /
• v.15 no.4
• /
• pp.647-650
• /
• 2006

The factors affecting clothing comfort are temperature, humidity, and air velocity of clothing microclimate which is the temperature and the humidity between the skin surface and the innermost garment, clothing pressure and clothing texture to the skin. This study was designed to estimate the distribution of clothing microclimate on the upper body. All the data of this study were collected from volunteered male subjects in the controlled climate chamber laboratory in which the temperature was $25\pm1^{\circ}C$, the relative humidity $50\pm5%$, and the air velocity 30cm/sec. All subjects should wear long-sleeved inner wear and pants woven in 100% cotton. Clothing microclimate temperature at 16 sites on the chest and 16 sites on the back was measured. The results were as follows: the distribution of the clothing microclimate temperature on the upper body was $30.6\sim34.7^{\circ}C$ on the breast and $31.5\sim35.4^{\circ}C$ on the back. While a mean temperature on the chest was 33.3$^{\circ}C$, it was 33.1$^{\circ}C$ on the back.

• International journal of advanced smart convergence
• /
• v.7 no.2
• /
• pp.135-142
• /
• 2018

Virtual reality (VR) technology has been increasingly more frequently used day by day in industries, entertainment and performances due to the development of AR and MR technologies. Performance arts also actively utilize $360^{\circ}$ VR technology due to the free expression of stage settings and auditoriums. However, technologies for systems in which performers wear VR devices firsthand rather than being in the sandpoint of bystanders while audiences wear VR head mounted displays(HMDs) to see performance stages have been rarely studied yet. This study investigated the technical possibilities of possible methods of expression that will enable performers to appear on the stage wearing VR devices. Since VR can maximize the sense of immersion with its closed HMD structure unlike augmented reality (AR), VR was judged to be suitable for studies centered on the mental interactions in the inner side of humans. Among them, to implement shamanistic expression methods with the phantoms of the body and soul, a motion capture technology linked with VR display devices and real-time cameras was realized on the stage. In this process, the importance of body ownership experienced by the performers (participants), reactions when they lost it, and the mental phenomena of the desire to possess the subjects of gaze could be seen. In addition, high possibility of development of this technology hereafter could be expected because this technology includes the technical openness that enables the audience to appear on the stage firsthand to become performers.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.122-128
• /
• 2010

This study examined several dyeing properties, physiological responses and comfort sensation of cotton knit underwear dyed with bamboo charcoal. The cotton knit underwear dyed with bamboo charcoal and treated with chitosan showed 99.9% antibacterial property and improved deodorization, and colorfastness. Eight children with atopic dermatitis worn underwear dyed with bamboo charcoal during 4 months. Their parents reported fewer itches of children. Wearing cotton knit underwear dyed with bamboo charcoal and non-dyed with bamboo charcoal respectively, these eight children rested for 20 minutes, then exercised for 10 minutes, and then rested for 30 minutes in the room maintained $28{\pm}1^{\circ}C$ and $50{\pm}5%R.H.$ Children's rectal temperature, skin temperature and microclimate inside garment of two types of cotton knit underwear were compared. As a result, the rectal temperature and skin temperature were higher when children were wearing underwear dyed with bamboo charcoal than non-dyed underwear. The microclimate temperature and microclimate humidity at the back of children were lower when children with underwear dyed with bamboo charcoal exercised and recovered.