• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.374-386
• /
• 2010

Recently, the theoretical and experimental research is being made actively in control character of waves of perforated-wall caisson breakwater like the slit caisson. This study showed that the character of reflection coefficient and the wave pressure acting on the front and inner of slit caisson were estimated in two and three dimensional numerical wave flume and compared each other. The numerical experiment was set and conducted by various cases as to a variety of wave steepness under 7 sec, 9 sec, 11sec and 13 sec period condition. In this study using a 2 and 3 dimensional numerical wave flume, it applied the Model for the immiscible two-phase flow based on the Naveir-Stokes Equations. This technique can easily reproduce a complicated physical phenomenon more than others and organize the program simply. According to the results of the experiment, the reflection coefficient was estimated high in short-period waves. However, 2-dimensional numerical experiment and 3-dimensional numerical experiment were the same in case of the long-period waves and high wave steepness. And to conclude in case of short-period waves the pressures were a relatively small difference between the two, but there was a big gap in longperiod waves and high wave steepness.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.398-408
• /
• 2023

This work developed a hood and filter for antibacterial protective clothing for medical powered air purifying respirators (PAPR) that can be used in medical settings and quarantine against infectious diseases such as Zika virus, Middle East respiratory syndrome (MERS), and coronavirus disease-19 (COVID-19). The hood material of the protective clothing was made of polypropylene spunlace nonwoven fabric (SFS) was used for withstand wind pressure and external physcial pressure. Forthermore, in order to reduce the user's risk of infection, phytoncide-based materials were used on the outer-surface of the hood to achieve a 99.9% antibacterial effect, and the inner-surface were treated with hydro-philic materials to improve absorbency by 25%. In addition to evaluating the artificial blood penetration resistance, dry mi-croorganism penetration resistance, wet bacteria penetration resistance, and bacteriophage penetration resistance required for medical protective clothing hoods, it received a passing evaluation of levels 2-6. Meanwhile, as a result of evaluating the performance of the antibacterial treated spunlace high efficiency particulate air (HEPA) filter, excellent antibacterial properties, dust removal rate, and differential pressure effect were confirmed. All performance evaluations were conducted by an accredited certification body in accordance with the medical PAPR certification standards.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.77-85
• /
• 2012

In a material, micro-cracks can be progressively occurred, propagated and finally lead to failure when it is subjected to cyclic or periodic loading less than its ultimate strength. This phenomenon, fatigue, is usually considered in a metal, alloy and structures under repeated loading conditions. In underground structures, a static creep behavior rather than a dynamic fatigue behavior is mostly considered. However, when compressed air is stored in a rock cavern, an inner pressure is periodically changed due to repeated in- and-out process of compressed air. Therefore mechanical properties of surrounding rock mass and an inner lining system under cyclic loading/unloading conditions should be investigated. In this study, considering an underground lined rock cavern for compressed air energy storage (CAES), the mechanical properties of a lining system, that is, concrete lining and plug under periodic loading/unloading conditions were characterized through cyclic bending tests and shear tests. From these tests, the stability of the plug was evaluated and the S-N line of the concrete lining was obtained.

• Membrane Journal
• /
• v.28 no.2
• /
• pp.83-89
• /
• 2018

Hydrophobic porous PVDF hollow fiber membranes for Membrane Distillation (MD) were fabricated by a combination of thermally induced phase separation (TIPS) and stretching. The purpose of this study is to investigate the shape and operating conditions of the module and the effect of piping size on parallel connection. In the optimization experiment of the vacuum membrane distillation module, the flux decreased as the packing density and length of the membrane in the module increased. When the module was connected vertically, it was confirmed that the nearest to the inlet of the vacuum port was the highest flux. In selecting the size of the header pipe of the module, it was confirmed that the maximum flux is shown when the inner diameter area of the hollow fiber membrane and the inner diameter area of the header pipe are the same. Also, it is necessary to find the optimal linear velocity because the higher the linear velocity in the module, the higher the flux, but the pressure acting on the module also increases proportionally.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.3
• /
• pp.139-148
• /
• 2000

In this paper, the interaction of oblique incident waves with a bottom-mounted and fluid-filled flexible membrane structure is investigated in the frame of linear hydro-elastic theory. The static shape of a membrane structure containing the fluid of a specific density is initially unknown and must be calculated before the hydrodynamic analysis. To solve hydrodynamic problem, the fluid domain is divided into the inner and outer region. The inner solution based on discrete membrane dynamic model and simple-source distribution over the entire fluid boundaries is matched to the outer solution ba~ed on an eigenfunction expansion method. The numerical results were compared to a series of Ohyama's experimental results. The measured reflection and tran¬smission coefficients reasonably follow the trend of predicted values. Using the computer program developed, the performance of a bottom-mounted and fluid-filled flexible membrane strocture is tested with various system parameters (membrane shape, internal pressure, density ratio) and wave characteristics (wave frequencies, incident wave angle). It is found that a bottom-mounted and fluid-filled flexible membrane structure can be an effel;tive wave barrier if properly designed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.423-434
• /
• 1995

It was used boundary element method(BEM) and analysed axisymmetric problem to solve hydraulic cylinder for large vessel acting uniform internal pressure(25N/m super(2)) within elastic limit. This paper was utilized the carbon steel tubes for machine structural purposed model, inner radius was 150mm and outer radius was 250mm, axial length was semi-infinite and the isoparametric element was used. The important results obtained in this study were summarized as follows. Radial, tangential and shearing stress occured the maximum stresses(48, -20 and 34MPa) at the inner radius and the minimum stresses(32, -4 and 18MPa) at the outer radius of the hydraulic cylinder for large vessel. But negative signs have meaning compressive stress and stress diminution ratio was about 0.15MPa/mm. The use of isoparametric element raised accuracy and the increment of input data lessened the error in internal point but computer run-time was increased. The double node was improved the internal solutions to settle discontinuity at corner and the double exponential formula lessened error of stress value at boundary neighborhood. And then coincidence between the analytical and exact results is found to be fairly good, showing that the proposed analytical by BEM is reliable.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.286-291
• /
• 2014

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.783-789
• /
• 2012

In this study, turbulent flow and heat transfer characteristics in a helically coiled tube have been numerically investigated. Helically coiled tubes are commonly used in heat exchange systems to enhance the heat transfer rate. Accordingly, they have been widely studied experimentally; however, most studies have focused on the pressure drop and heat transfer correlations. The centrifugal force caused by a helical tube increases the wall shear stress and heat transfer rate on the outer side of the helical tube while decreasing those on the inner side of the tube. Therefore, this study quantitatively shows the variation of the local Nusselt number and friction factor along the circumference at the wall of a helical tube by varying the coil diameter and Reynolds number. It is seen that the local heat transfer rate and wall shear stress greatly decrease near the inner side of the tube, which can affect the safety of the tube materials. Moreover, this study verifies the previous experimental correlations for the friction factor and Nusselt number, and it shows that the correlation between the two in a straight tube can be applied to a helical tube. It is expected that the results of this study can be used as important data for the safety evaluation of heat exchangers and steam generators.

• (The)Study of the Eastern Classic
• /
• no.57
• /
• pp.407-435
• /
• 2014

Gusadang Kim, Nak-Haeng is a scholar of 18th century in Yeongnam region who wrote about 130 Chinese poems. In this study, I searched Gusadang's inner world by interpreting his Chinese poems. His life is closely related to his father Jesan Kim, Seong-Tak who was exiled. The fact that he devoted himself to his father for 10 years shows he had strong standards in making decisions in life. In short, Gusadang was a person who looked gentle but was tough inside and he remained firm in his faith even with outside pressure. He could not achieve glory because he spent time serving his father in his thirties. Although he heard compliments from others that he was talented enough to succeed as a scholar, he lacked time and mental energy to study. Also, he was a moralist and wrote some poems about impressive events in his life even though he did not fully devote himself to writing poems. In this study, I searched his inner world focusing on how he felt and thought about outside world by analyzing his poems. In conclusion, I found three characteristics from his poems. Firstly, depressed feelings are shown based on excessive self-consciousness in the poems related to his father. Secondly, his will to keep balance in life is shown because he wanted a harmonious life as a seeker after truth. Thirdly, a sense of isolation is shown because he had to keep a distance from outside world.

• Journal of Korean Academy of Nursing
• /
• v.8 no.1
• /
• pp.163-180
• /
• 1978

Much of a person's energy is spent in the effort of becoming a productive member of to-day's complex society. This activity may cause tension, and chronic unrelieved tension is an influential factor in blood pressure elevation. The problem of this study was to identify manifest needs and self-actualization of patients with essential hypertension, and to analyse and compare their manifest needs and selt-actualization with the selected general characteristics of We, sex, religion, occupation and level of education with a control group of patients with normal blood pressure readings. The purpose was to contribute to the planning of nursing interventions toward reducing the impact of complex psycho-somatic factors on the anxiety of patients with essential hypertension. The instruments used included selected items from the Edwards (1959) Personal Preference Schedule (EPPS) as adapted by Hwang (1965) and from the Personal Orientation Inventory (POI) (Shostrom 1964, 1974) adapted by Kim and Lee (1977) to measure manifest needs and self-actualization. The convenience sample was chosen from 149 persons who presented themselves for general physical examinations at Ewha University Medical Centre and 41 patients diagnosed with essential hypertension at three general hospitals in Seoul during June 1 and August 31, 1977. Forty-nine persons from the Ewha group with blood-pressure readings exceeding 150/90 were added to the experimental group. Data were analysed by the S.P.S.S. computer programme using t-test and tests for statistical significance. Statistically significant findings were as follows: A. Blood Pressure and Manifest Needs. 1. with the exception of Autonomy, patients with hypertension had significantly high scores on all variables Abasement, Achievement, Affiliation, Aggression, Dominance, Emotionality, Exhibitionism and Sex. 2. When mean scores of normal persons were compared by age groups, normal persons had higher scores in the following order on Abasement (50's, 40's, 20's, 30's), Achievement (50's, 30's, 40's, 20's), Affiliation (50's, 40's, 30's, 20's), Dominance (50's, 40's, 40's, 20's) and Exhibitionism (30's, 50's, 40's, 20's). In each case, there was a significant difference between the first and last age group scores. 3. When the mean scores of normal persons were compared by sex, normal men had higher scores than women on Achievement, Affiliation, Aggression, Dominance, Exhibitionism and Sex. Male patients had higher scores than female patients on Achievement, Dominance, Exhibitionism and Sex, but female patients scored higher in Emotionality. 4. Normal persons had higher scores related to religion in the following order on Achievement (Buddhism, no religion, Christianity). Hyper tensive patients had higher scores on. Exhibitionism (no religion, Christianity, Buddhism). 5. Normal persons had higher scores related to occupation in the following order on Achievement and Exhibitionism (unemployed, office workers, teachless, businessmen), Emotionality (office workers, unemployed, businessmen, teacher) and Sex (office workers, unemployed, teachers, businessmen). Hypertensive patients had higher scores on Achievement and Aggression (teachers, businessmen, office worker, unemployed), Dominance and Exhibitionism (businessmen, teacher, of ace workers, unemployed) and Sex (teachers, office worker, businessmen, unemployed). 6. Normal persons had higher scores related to level of edification in the following order on Abasement, Emotionality and Autonomy (secondary school graduation, university). Hypertensive patients had higher scores on Abasement (no education, primary, university, secondary), Achievement (no education, secondary, university, primary) , Dominance (university, no education, secondary, primary), Exhibitionism (university, secondary, no education, primary), and Sex (university, secondary, primary, no education). B. Blood Pressure and Self_Actualization 1, Patients with hypertension had significantly lower scores on all variables. 2. Normal persons had higher scores related to age groups in the following order on Existentiality (20's, 30's, 40's, 50's). Hypertensive patients showed no significantly different scores. 3. Normal women had higher scores than men on Time Competence. Normal men had higher scores on Feeling Reactivity. Male patients had higher scores than women on Self-Actualizing Value and Self-Regard. 4. Normal persons ha 1 higher scores related to religion on spontaneity (Buddhism, no religion, Christianity). Hypertensive patients had higher scores on Time Competence and Nature of Man (Buddhism, Christianity, no religion). 5. Normal persons had higher scores related to occupation in the following order on Existentiality (teachers, office workers, businessmen, unemployed) and Self-Regard (unemployed, office workers, teachers, businessmen). Hypertensive patients showed no significantly different scores. 6. Normal persons had higher scores related to level of education in the following order on Existentiality and Self-Acceptance (university, secondary). Hypertensive patients had higher scores on inner-Director (university, secondary, no education, primary) and Existentiality (university, secondary, primary, no education). Recommendations for nursing interventions with hypertensive patients with emotional problems or low self-actualization were made. 1. The nurse should encourage the patient through her interactions with other members of the medical team to accept counselling and health education. 2. Through her therapeutic interpersonal relationships with the patient, the nurse should help him discover the causes of his emotional tension. 3. Through her health teaching with the family, the nurse should encourage them to participate with the medical team in the patient's therapeutic plan and in providing him with the minimum possible emotional support. 4. Through frequent counselling with the obsessive-thinking and inflexible patient, the nurse should reevaluate the patient's behaviour and her interventions. 5. Seriously ill patients should be given needed reeducation by members of the professional medical team.