• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.47-52
• /
• 2013

In the present study, the turbulent flow from an annular jet is investigated by using large eddy simulation. Particularly, the effect of the ratio of the inner and outer diameters is one of the main interests of this study. The instantaneous fields presented in this paper showed that behind the jet exit the backflow region, as well known in literatures, exists, and its detailed behavior depends on the ratio of the inner and outer diameters ($D_1/D_2$). The dependence on $D_1/D_2$ is attributed to the different shear layer development according to $D_1/D_2$. At small $D_1/D_2$, the development of the outer shear layer is similar to that from the circular jet. However, with increasing $D_1/D_2$, the interaction between the outer and inner shear layers becomes strong, resulting in fast transition to turbulence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.236-242
• /
• 2000

NZP velocities were investigated on Ag sheathed multi filamentary Bi-2223 tape and direction type HTS cable. The critical current($I_c$) of Ag sheathed Bi-2223 tape and direction type HTS cable were 12 A, 63 A at 77 K, 0 T. NZP velocities of tape with two condition of DC and AC were almost same at each temperature. In case of DC, the NZP velocities of numerical analysis and experiment were almost same. NZP velocities of direction type HTS cable were 1.9-2.4 cm/sec. The result shows that the total transport current of spiral type HTS cable in $LN_2$ was 475[A], and transport current passed through almost the outer layer (2-layer). Also, AC transport losses in outer layer of HTS cable was proportion to $I^2$ and higher than losses of inner layer. And in case of $I_p=I_c$, calculated numerical loss density was concentrated on the edge of tape and most of loss density in cable was distributed outer layer more than inner layer.

• Ocean and Polar Research
• /
• 제28권3호
• /
• pp.287-290
• /
• 2006

Eye growth and lens diameter of brown croaker Miichthys miiuy were positively allometric between hatching and 180 days post-hatch (d.p.h.). Eye growth in relation to head length and head height was nearly isometric. Eyes were formed completely at 14 d.p.h. At this age, the eye has a crystalline lens, an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, and a pigment epithelium. The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.

• Applied Microscopy
• /
• 제27권4호
• /
• pp.417-432
• /
• 1997

The structures of the fertilized egg envelope in three species of cichlidae, golden severum (Cichlasoma severum var.), convic cichlid (Cichlasoma nigrofasciatum) and discus (Symphysodon aequifasciatus) were investigated by routine light and electron microscopies. The fertilized eggs of all three species were of the non-transparent, ellipsoidal, adhesive and non-floted type. The egg envelopes have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. In golden severum, an outer surface of egg envelope was covered by a reticular layer, that of convic cichlid was covered by an amorphous reticular layer and that of discus was covered by a branched reticular layer. The fertilized egg envelopes consisted of two distinct layers, an adhesive outer layer and an inner layer, consisted of lamellae alternating with interlamellae of lower electron density, in all three species; an inner layer of golden severum was $15\sim17$ layers, that of convic cichlid was $14\sim16$ layers, and that of discus was $18\sim19$ layers.

• Applied Microscopy
• /
• 제1권1호
• /
• pp.11-17
• /
• 1969

Conidio spores of Aspergillus niger (strain No. NRRL 330) cultured on potato dextrose agar media were studied by electron microscopy, using the thin sectioning techniques. Conidio spores to be sectioned were fixed by triple methods with $K_2Cr_2O_7$, Glutaraldehyde and $OsO_4$. After dehydrated with alcohol, the specimens were embedded in metacrylate and epon resin media, and thinly sectioned by Porter-Blum MT-2. After sectioned these specimens were negative-stained with uranyl acetate and observed. by Hitachi HS-6 electron microscope. The results of this experiment were summarized as follows. 1. The structures of spore ,wall system seem to be formed 4 layers; exosporium, basal layer, spore coat and unit cell membrane. The protuberance of spore surface that was looked like hair appears to be protrusived from the basal layer. 2. The 3 layers of unit cell membrane was constituted outer layer membrane, inner layer membrane and inter-mediate light layer. 3. The structures of intra cytoplasmic membrane appear as spiral form which was consisted of 3 layers membrane system; outer membrane, inner membrane, and intermediate layer, which has pits. 4. The cement substance of spore coat and cortex may be changed quantitatively by physiological state in cell. 5. In some cases, we observed that the ribosome was transformed into poly ribosome group, and the storage materials and the protein crystals were changed variously. It. has been suggested that the morphological change of some cytoplasmic materials may be caused by some specialized function of the physiological stage.

• 보존과학회지
• /
• 제26권3호
• /
• pp.269-276
• /
• 2010

법주사 철확의 부식상태 및 미세조직 분석을 통해 제작기법을 추정하고자 광학현미경, SEM-EDS, 미소경도계, XRD를 이용하여 자연과학적 연구를 실시하였다. 표면층의 미세조직에서는 페라이트와 일부 펄라이트 조직이 관찰되었다. 내부층에서는 펄라이트 조직과 깃털모양의 흑연이 관찰되었으며, 중간 경계층에서는 심한 부식현상이 관찰된다. 미소경도는 조직별로 217Hv~698Hv 값의 범위를 가졌으며, 이는 일반적으로 고대 철제유물에서 보이는 경도 값 범위이다. 각 층별 미세조직에 대한 성분분석 결과, 표면층이 내부층에 비해 탈탄이 많이 되었음을 알 수 있었다. 금속 부식화합물의 XRD 동정 결과, 일반적인 금속유물의 부식과정에서 만들어지는 침철석과 적철석이 동정되었다. 결론적으로 법주사의 대형 철확은 주조기술로 제작되었으며, 내부는 흑연을 포함한 회주철 조직을 보이고 있다. 또한 표면층은 사용과정에서 가열과 냉각의 반복으로 탈탄작용이 일어났다. 이러한 연구결과는 대형 철확의 제작기법을 밝히는데 중요한 비교자료로 활용될 수 있을 것이다.

• 한국광학회지
• /
• 제14권4호
• /
• pp.359-364
• /
• 2003

편광에 따른 성능 변화가 작은 deep-ridge 도파관 구조에 제작이 용이한 double-sided 프로세스를 이용하여 구현할 수 있는 편광에 무관한 매우 짧은 결합 길이를 가지는 double-sided deep-ridge 도파관 구조를 가지는 새로운 수직 방향성 결합기를 제안하고 여러 가지 구조 파라미터들이 결합길이에 미치는 영향에 대하여 연구하였다. 도파관 폭의 변화에 대한 결합길이의 변화는 코어 두께의 변화에 대한 결합길이의 변화보다 작게 나타나는 것을 볼 수 있었다. 내부 클래딩 영역의 두께가 감소할수록, 코어 두께가 감소할수록 결합 길이가 감소함을 볼 수 있었다. 또한 같은 코어 두께에 대해서는 내부 클래딩 영역의 두께가 감소할수록, 같은 내부 클래딩 영역의 두께에 대해서는 코어 두께가 감소할수록 편광에 관계없이 결합 길이가 같아지는 도파관 폭이 작아짐을 볼 수 있었다.

• 한국발생생물학회지:발생과생식
• /
• 제16권2호
• /
• pp.101-106
• /
• 2012

어류의 시각 구조와 시각 기능 연구에 있어서 행동적 요인이나 환경적 요인의 중요성은 시각생태학에서 매우 중요하게 다루어지고 있으며, 볼락, Sebastes inermis에 관하여는 아직까지 초기 눈의 성장 및 발달에 관한 발생생물학적 연구가 이루어진 바가 없음을 고려하여 이에 대한 연구를 수행하였다. 볼락의 전장, 두장, 두고, 눈의 직경과 수정체 직경은 산출 직후부터 산출 후 60일까지의 단계에서 양성의 상관관계(positive allometry)를 보여주었다. 전장과 관련된 두장과 두고에서의 증가와, 두고와 관련된 눈의 직경과 수정체 직경의 성장은 거의 동형(isometric)성장을 나타내었다. 눈은 산출단계에 완전히 형성되었다. 산출 단계의 눈은 시신경 섬유층, 신경절 세포층, 내망상층, 내과립층, 외망상층, 외과립층, 외경계막, 간체, 추체층 및 상피층을 가지며, 산출 후 60일의 망막 두께는 산출 직후의 망막 두께보다 더 크다. 본 실험기간 동안, 망막의 간체와 추체층의 비율 및 외과립층과 시신경의 비율은 상당히 증가한 반면, 망막의 외망상층과 내과립층, 신경절 세포층의 비율은 현저하게 감소하였다(P<0.05). 차후, 본 연구에 사용된 볼락 망막에 대한 빛 민감성과 공간 해상력에 관한 부수 연구가 필요하리라 사료된다.

• Journal of the Optical Society of Korea
• /
• 제7권2호
• /
• pp.53-58
• /
• 2003

We report the formation of inner cladding modes in the optical fiber having an inner cladding structure. The inner cladding layer located between the core- and the cladding- layers of a conventional fiber might have, so called, inner cladding mode(s). The brief history of the inner cladding fiber and the spectral properties of the inner cladding mode are presented. By utilizing fiber gratings, the spectral properties of the inner cladding mode formed in Dispersion Compensating Fiber (DCF) are discussed. It was observed that one resonant peak of a long-period fiber grating was not sensitive to the variation on the cladding surface. With a fiber Bragg grating, a small group of unusual resonant Peaks was observed between the main Bragg Peak and the series of usual Peaks resulted from the mode coupling to counter-propagating cladding modes. Within the DCF by using fiber gratings, it is noted, at least one mode can be coupled to the inner cladding mode and a few outer cladding modes are severely affected by the inner cladding of the fiber.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.146-154
• /
• 2009

It is necessary to minimize the thickness of Ni inner electrode layer and to improve the coverage of inner electrode, for the purpose of developing the ultra high-capacity multi layered ceramic capacitor (MLCC). Thus, low temperature sintering of dielectric $BaTiO_3$ ceramic should be precedently investigated. In this work, the relationship between dielectric properties of MLCC and batch condition such as mixing and milling methods was investigated in the $BaTiO_3$(BT)-Dy-Mg-Ba system with borosilicate glass as a sintering agent. In addition, several chip properties of MLCC manufactured by low temperature sintering were compared with conventionally manufactured MLCC. It was found that low temperature sintered MLCC showed better DC-bias property and lower aging rate. It was also confirmed that the thickness of Ni inner electrode layer became thinner and the coverage of inner electrode was improved through low temperature sintering.