• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.69-79
• /
• 2004

This study focuses on the relationship between pollution factors around Masan, Changwon and Chinhae city considerd as main pollution sources and marine environment in Masan bay of Korea. Water quality data measured In Jinhae bay and environmental investigation data in Masan, Changwon and Jinhae cities from 1981 to 1998 were used for this study. Annual means and standard deviations of COD, DIN and DIP concentrations from 1981 to 1998 showed that both their concentration and fluctuations were higher in the inner part of Masan bay (region A) than near Somodo (region B). Sediment dredging in Masan bay had been done from 1990 to 1994. After dredging, COD concentration has been decreasing In surface layer. Also water pollution was gradually spreaded from the inner part to the outer part of the bay due to the continuous inflow of domestic sewage and industrial wastewater. In the late of 1990s, the pollution was heavier. DIN and DIP concentrations were found to be increased by establishment of industry complex and decreased by sewage treatment plant near the city adjacent to Jinhae bay, 1993. The correlation between COD, DIN and DIP changes and neighbor cities' pollution sources were calculated From 1981 to 1998, correlation coefficient (r) was over 0.8 except for the bottom of region A From 1981 to 1998, r between the DIP concentration and population was over 0.65 except for the surface of region A, and the r between the DIP and the number of factories was over 0.6 too, in region B.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.3
• /
• pp.37-45
• /
• 2000

In recent years two reflection methods, i.e. GPR and seismic Impact-Echo, are usually performed to obtain the information about tunnel lining structures composed of concrete lining, shotcrete, water barrier, and voids at the back of lining. However, they do not lead to a desirable resolution sufficient for the inspection of tunnel safety, due to many problems of interest including primarily (1) inner thin layers of lining structure itself in comparison with the wavelength of source wavelets, (2) dominant unwanted surface wave arrivals, (3) inadequate measuring strategy. In this sense, seismic physical modeling is a useful tool, with the use of the full information about the known physical model, to handle such problems, especially to study problems of wave propagation in such fine structures that are not amenable to theory and field works as well. Thus, this paper deals with various results of seismic physical modeling to enable to show a possibility of detecting the inner layer boundaries of tunnel lining structures. To this end, a physical model analogous to a lining structure was built up, measured and processed in the same way as performed in regular reflection surveys. The evaluated seismic section gives a clear picture of the lining structure, that will open up more consistent direction of research into the development of an efficient measuring and processing technology.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.345-351
• /
• 2008

Fe-impregnated activated carbon(Fe-AC) was prepared by Fe(III) loading on activated carbon(AC) in various preparation pH. In order to evaluate the stability of Fe-AC, dissolution of iron from Fe-AC in acidic conditions was measured. In addition, batch experiments were conducted to monitor the removal efficiency of copper by Fe-AC. Results of stability test for Fe-AC showed that the amount of extracted iron increased with contact time but decreased with increasing solution pH. The dissolved amount of iron gradually increased at solution pH 2 and finally 13% of the total iron loaded on activated carbon was extracted after 12 hr. However dissolution of iron was negligible over solution pH 3. Removal of Cu(II) by Fe-AC was greatly affected by solution pH and was decreased as solution pH increased as well as initial Cu(II) concentration decreased. Surface complexation modeling was performed by considering inner-sphere complexation reaction and using the diffuse layer model with MINTEQA2 program.

• Korean Journal of Ichthyology
• /
• v.27 no.4
• /
• pp.257-262
• /
• 2015

The visual cells in the retina of Iksookimia longicorpa (Pisces, Cobitidae) were investigated by light and scanning electron microscopes. The retina ($216.42{\pm}13.36{\mu}m$) has several layers, and the visual cell layer consists of unequal double cones and large rods. In a double cone, two members are unequal such that one cone is longer than the other (long element $26.42{\pm}1.7{\mu}m$, short element $16.82{\pm}1.1{\mu}m$). The cones form a row mosaic pattern in which the partners of double cones are linearly oriented with a large rod. The visual cells observed have an outer segment (hematophilic), inner segment (eosinophilic). In scanning electron microscopy, the outer segment links to inner segment by so-called calyceal piles (calyceal processes) of membrane discs surrounded by double membranes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.362-362
• /
• 2010

Today, vast attention has been paid to periodic arrays of nanostructures due to their potential for applications such as memory with huge storage density. Such application requires large-scale fabrication of well ordered nano-sized structures. One of the most widely used methods for the ordered nanostructures is lithography. This top-down process, however, has the limit to reduce size. Here the promising alternative is the self-organization of ordered nano-sized structures such as large scale 2d carbon-induced reconstructions on W(110). In the present study, we report on the first well-resolved atomic resolution STM studies of the well-known R($15{\times}3$) and R($15{\times}12$) carbon induced reconstruction of the W(110). From the atomic image of R($15{\times}3$) for different values of tunneling gap resistance, we can tell there are no missing atoms in unit cells of R($15{\times}3$) and some atomic displacements are substantial from the clean W(110), even though not all the imaged position of atoms correspond to tungsten, but may include those of carbon. We are considering two cases; First case is related to lattice deformation, or top layer of W(110) is deformed in the process of relief of strain caused by random inserting of carbon atoms possibly in the interstitial position. In the second case, R($15{\times}3$) unit cell results from a coincidence lattice between clean W(110) substrate and tungsten carbide overlayer which has rectangular atomic arrangement and giving R($15{\times}3$) coincidence lattice. beta-W2C showing rectangular unit cell should be a candidate. Further, we report on new reconstructions. Unlike the well-known R($15{\times}12$) consisting of two parts, two inner structures between two "Backbone" structures. The new reconstruction, which we found for the first time, contains more parts between the "Backbone"s. Sometimes we can observe the reconstruction consists of only inner parts without "Backbone" parts. Thus, the observed reconstruction can be built by constructing of two types of "Lego"-like block. Moreover, the rectangle shape of "Backbone" transform to parallelogram-like shape over time, the so-called wavy-R($15{\times}12$). Adsorption of hydrogen can be the reason for this transformation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.3
• /
• pp.400-421
• /
• 2019

This study was conducted to find out the seasonal distribution characteristics of meiobenthic communities to understand the benthic ecosystem of Gwangyang Bay, one of the representative bays in the southern coast of Korea. The faunal sampling was conducted eight times seasonally at 20 stations from 2010 to 2011. Among the meiobenthic fauna that appeared during the study period, the nematodes and harpacticoids were the most dominant. In the summer of 2011, the lowest density ($13ind.10m^{-2}$) was seen at station 10 on the inner part of the bay. In the winter of 2011, the highest density ($3,109ind.10m^{-2}$) was seen at station 4 on the inner part of the bay. Although the trend of seasonal changes in density was not clear, the meiobenthic community was seen to be affected more by the environmental factors in each season. Particularly, while the density of the harpacticoids, a dominant faunal group, showed negative correlations with the organic content and average particle size in the summer sediments (p<0.05, p<0.01), the density of the nematodes showed no significant correlation with the environmental factors except with the winter average particle size and the bottom layer's water temperature. The density change of meiobenthos showed irregular changes in Gwangyang Bay, instead of a general trend showing a low density in winter due to low water temperature but an increased density in spring and summer when the water temperature rises and a decreased one again in fall. Considering such a seasonal trend, it seems that the benthic ecosystem of Gwangyang Bay is affected more by artificial environmental factors than by natural environmental ones.

• Applied Biological Chemistry
• /
• v.23 no.3
• /
• pp.141-149
• /
• 1980

Contents of heavy metals in various bran layers of rice collected from Kyeong Nam province in 1978, were determined. The components of crude prote in, crude fat, crude cellulose, and ash in all the rice samples were found to be most concentrated in the rice of each layer of brown, 70% polished, and 90% polished, but the contents of crude protein (9.22%), crude fat (1.16%), crude cellulose (1.01%), and ash (0.38%) in polished rice decreased rapidly. On the other hand, the amounts of nitrogenfree extract in the rice were showed increasingly toward the inner layer and those of polished rice were 75.54%. The contents of lead, zinc, nickel, cadmium, and arsenic in bran layer of rice decreased in order of that of 90% polished, 70% polished, brown, and polished rice. Their amounts in polished rice were lead, $0.054{\sim}0.610ppm$; zinc, $9.830{\sim}19.093ppm$; nickel, trace-1.776ppm; cadmium, trace-0.039ppm; arsenic, ND-0.170ppm. It was shown that copper was more concentrated in the layer of 90% polished rice $(0.581{\sim}1.476ppm)$, and iron more in brown rice $(27.971{\sim}66.569ppm)$ than in any other portion, whereas mercury $(0.006{\sim}0.072ppm)$, chromium $(1.538{\sim}7.822ppm)$, and manganese $(57.371{\sim}179.252ppm)$ were much contained in the layer of 70% polished rice. Their amounts in polished rice were copper, $0.218{\sim}0.858ppm$; iron, $1.480{\sim}9.573ppm$; mercury, $0.006{\sim}0.027ppm$; chromium, ND-1.520ppm; and manganese, $6.730{\sim}11.562ppm$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.13-23
• /
• 2009

To intensively analyze and examine the changes in palatability of cooked rice and structural properties of rice grains influenced by increased nitrogen topdressing during the panicle formation and ripening stage, a series of experiments were carried out using three japonica rice cultivars with contrasting rice quality characteristics. The protein content of brown rice increased maximally up to $35{\sim}47%$ of that in standard N6 plot with the increase in nitrogen topdressing fertilizer during 20 days before heading to 10 days after flowering. The high-yielding rice cultivars showing poor palatability of cooked rice revealed larger increase in protein content of rice grains by increased nitrogen topdressing. Under the same nitrogen level of 15 kg per 10a with nitrogen topdressing at 3 kg/10a, high-yielding rice cultivars, Yumehikari and Reihou showed the significant increase in protein content of brown rice when topdressing was applied at 10 days after flowering as compared with when it was applied at 30 days after transplanting. Although the variation in amylose content of milled rice as affected by nitrogen topdressing level was relatively small, it decreased within 1% with the opposite tendency against increased protein content of brown rice by increased nitrogen topdressing. The total score of sensory evaluation was higher in the order of Hinohikari < Yumehikari < Reihou in panel test. It decreased significantly by increased amounts of nitrogen topdressing during 20 days before heading to 10 days after flowering when nitrogen level was higher than 12 kg/10a. The more poor palatable rice cultivar in panel test revealed the larger decreasing in total score of sensory evaluation by higher nitrogen topdressing rates. All sensory evaluation components were largely affected by the change in protein content of brown rice rather than amylose content of milled rice. The influence of protein content to palatability of cooked rice was larger in poor-palatable rice than in high-palatable rice. The protein content decreased drastically from outer layer to inner layer of rice grains, while the amylose content increased on the contrary. The high-palatable rice exhibited higher distribution of protein content on bran layer but lower distribution of protein content on the layer of polished rice as compared with the poor-palatable rice. Especially, the high-palatable rice showed also significantly lower distribution of amylose content on the outer layer of polished rice as compared with the poor-palatable rice.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.33-40
• /
• 2014

This study was carried out to understand the physiological characteristics of early-matured 'Hanareum' (Pyrus pyrifolia Nakai) pears through anatomical structure and fruit characteristics and also the changes according to gibberellin (GA) treatment. The pericarp at full bloom consists of outer epidermis, hypodermis, parenchyma cell, and inner epidermis from the exterior and five types of vascular bundle tissues. Cork cell layer was formed at 70 days after full bloom (DAFB) in non-treated fruits and formed at 60 DAFB in GA treated fruits. Cell division period was from full bloom (FB) to 40 DAFB and then fruit enlargement was accomplished by the cell growth. Comparison of the fruit enlargement and fruit structure development by GA treatment or non-treatment showed that cell division of 'Hanaerum' fruits did not affect the GA treatment but fruit enlargement was affected cell growth. Fruit stalk of GA treatment fruits was larger than non-treated fruits from 40 DAFB which correspond to the period of the stop of cell division and 'Hanareum' was regarded GA treatment expedite of vascular bundle tissue growth and relatively increased nutrient transport to fruit. In addition to, average fruit quality between the non-treatment and GA treatment showed that fruit weight was higher in fruits treated by GA but firmness was lower and probably was effected fruit storing in 'Hanareum' pear.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.287.1-287.1
• /
• 2016

Three-dimensional (3-D) semiconductor nanoarchitectures, including nano- and micro- rods, pyramids, and disks, are emerging as one of the most promising elements for future optoelectronic devices. Since these 3-D semiconductor nanoarchitectures have many interesting unconventional properties, including the use of large light-emitting surface area and semipolar/nonpolar nano- or micro-facets, numerous studies reported on novel device applications of these 3-D nanoarchitectures. In particular, 3-D nanoarchitecture devices can have noticeably different current spreading characteristics compared with conventional thin film devices, due to their elaborate 3-D geometry. Utilizing this feature in a highly controlled manner, color-tunable light-emitting diodes (LEDs) were demonstrated by controlling the spatial distribution of current density over the multifaceted GaN LEDs. Meanwhile, for the fabrication of high brightness, single color emitting LEDs or laser diodes, uniform and high density of electrical current must be injected into the entire active layers of the nanoarchitecture devices. Here, we report on a new device structure to inject uniform and high density of electrical current through the 3-D semiconductor nanoarchitecture LEDs using metal core inside microtube LEDs. In this work, we report the fabrications and characteristics of metal-cored coaxial $GaN/In_xGa_{1-x}N$ microtube LEDs. For the fabrication of metal-cored microtube LEDs, $GaN/In_xGa_{1-x}N/ZnO$ coaxial microtube LED arrays grown on an n-GaN/c-Al2O3 substrate were lifted-off from the substrate by wet chemical etching of sacrificial ZnO microtubes and $SiO_2$ layer. The chemically lifted-off layer of LEDs were then stamped upside down on another supporting substrates. Subsequently, Ti/Au and indium tin oxide were deposited on the inner shells of microtubes, forming n-type electrodes of the metal-cored LEDs. The device characteristics were investigated measuring electroluminescence and current-voltage characteristic curves and analyzed by computational modeling of current spreading characteristics.