• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.36-43
• /
• 2006

There was some difficulty dewatering properties due to small porosity diameter of cake, when pigment sludge contained fine particle was formed by cake under the dewatering. It was difficult to dewater the sludge with fine particles with the conventional mechanical dewatering method. This study was to improve the dewatering rate as discharging the water from porosity of cake easily, supplying the low heat to the cake layer. Thermal dewatering equipment of piston type to keep up constant temperature on the cake was set up and relative experiment was conducted for sludge of 200 g with fine pigment particle. As test results. filtration of 176.8 g, cake weight of 19.4 g, cake thickness of 4.2 mm was measured, and it was analyzed that the water content of cake was 47 wt% and dewatering velocity, which moaned the residual d교 sloid amount per dewatering area, was $2.1DS\;m^{2}{\cdot}cycle$. This results showed that filtration increased, cake weight and thickness decreased and dewatering velocity increased against mechanical dewatering method. And water content of cake decreased about 30%, so the result which dewatering rate improved was drew generally. The reason is that the inner vapor pressure working at the cake porosity increased as applying the low heat to the cake layer, which lead to discharge the water from porosity easily. Therefore, this study was estimated by the useful technology for sludge reduction.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.231-240
• /
• 2018

Bamboo is one of the major biomass resources that have many advantages such as fast growing, easy cultivation, short rotation, and a relatively lower price. In this study, the anatomical characteristics of Moso bamboo (Phyllostachys pubescens) by age from one-year-old to five-year-old were examined by optical and scanning electron microscopy. Also, the crystalline properties such as relative crystallinity and crystallite width were investigated by an X-ray diffraction method. In one-year-old bamboo xylem, a few vascular bundles showed missing bundle sheath in near the intercellular space. Moreover, one-year-old bamboo had the shortest fiber length and the smallest values in vessel diameter, width of vascular bundle, and thickness of inner layer. One-year-old bamboo also showed the smallest values in the crystallinity and crystallite width. Near epidermis samples had longer fiber length and greater vascular bundle spacing than near pith samples. Relative crystallinity and crystallite width near the epidermis were also higher than near the pith. This study revealed significant differences in qualitative and quantitative anatomical characteristics between one-year-old and two-year- or more old Moso bamboos. It is concluded that the structural differences by bamboo age can be used to differentiate the characteristics of juvenile and mature bamboo.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.255-258
• /
• 2011

A new gerbera cultivar 'Paspin' was released by the National Institute of Horticultural & Herbal Science (NIHHS) in 2009. A cross was made between 'Lilabella' and 'Mephisto' with purple and semi-double in 2005. After investigation of the characteristics for five years (from 2005 to 2009), it was selected specially as a cut flower. The 'Paspin' cultivar has a pastel pink flower color (RHS R52B) with green disc center and semi-double flower. It has large-sized flowers which average flower diameter is about 12.8 cm. And inner ray floret and disc diameters are 7.87 cm and 2.57 cm, respectively. It has an adequate peduncle height of 48.6 cm, and a longer vase life of 10.8 days. It is vigorous in growth and also adaptable to the local cultural environments of Korea. It is expected that if the 'Paspin' cultivar will be planted, the royalty fees to be paid to other countries can be saved. And the local growers will also be benefitted since the cost of cultivars will be lower than the imported ones.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.344-354
• /
• 2019

In seven species of Korean Asarum, 44 qualitative and 28 quantitative characters were reviewed taxonomically. Among 44 qualitative characters observed in vegetative and reproductive organs, the states of 27 characters were common in all the seven species. Among 28 quantitative characters, five characters have the same values in all the seven species; the number of cataphyll (2-4), leaf (2), calyx lobe (5), stamen (12) and pistil (6). White spots on adaxial surface of leaf (effectively) distinguished A. maculatum and A. versicolor from the other species. Many long soft hairs on abaxial surface of leaf distinguished A. mandshuricum from other species with short hairs. The glandular hairs on inner surface of calyx tube were divided into 2 types, reflecting the taxonomic relationships between the species: Type 1 has non-stalked glandular hairs (A. maculatum, A. sieboldii and A. sp.), and Type 2 has stalked glandular hairs (A. patens, A. versicolor, A. mandshuricum and A. misandrum). The length, shape, colour of calyx lobe and the extent to which the calyx lobe recurves, as well as the diameter and colour of calyx tube throat, were confirmed to be taxonomically valuable. In the case of glandular hair density on the surface of calyx lobe, A. patens with low density and A. sp. with high density were clearly distinct from all the other species with intermediate hair density. Meanwhile, the stylar protuberance length of A. patens (2.9-3.3 mm) was strikingly different from other species (1.4-2.5 mm). Additionally, further examination of the identities of A. yeonbyeonense and A. yeonbyeonense var. viridiluteolum is required.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.109-115
• /
• 2019

In arc-welding applying to the present automobile part manufacturing process, a wrist-hollow type arc welding robot can shorten the welding cycle time, because feedability of a welding wire is not affected by a robot posture and thus facilitates high-quality arc welding, based on stable feeding with no entanglement. In this paper, we will propose the optimization of wrist design for a wrist-hollow type 6-Axis articulated robot. Specifically, we will perform the investigation on the optimized design of inner diameter of hollow arms (Axis 4 and Axis 6) and width of the upper arm by using the simulation of robot motion characteristics, using a Genetic Algorithm (i.e., GA). Our simulations are based on $SolidWorks^{(R)}$ for robot modeling, $MATLAB^{(R)}$ for GA optimization, and $RecurDyn^{(R)}$ for analyzing dynamic characteristics of a robot. Especially $RecurDyn^{(R)}$ is incorporated in the GA module of $MATLAB^{(R)}$ for the optimization process. The results of the simulations will be verified by using $RecurDyn^{(R)}$ to show that the driving torque of each axis of the writs-hollow 6-axis robot with the optimized wrist design should be smaller than the rated output torque of each joint servomotor. Our paper will be a guide for improving the wrist-hollow design by optimizing the wrist shape at a detail design stage when the driving torque of each joint for the wrist-hollow 6-axis robot (to being developed) is not matched with the servomotor specifications.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.205-212
• /
• 2021

Offshore jacket structures generally comprise steel members, and the safety standard for jacket structures typically focuses on the steel components. However, large amounts of concrete grouting is filled in the legs of the Gageocho jacket structure to aid in the recovery from typhoon damage. This paper proposes a safe and lightweight design for the Gageocho ocean research station comprising steel members instead of large amounts of concrete reinforcement in the legs. Based on the actual design, the structural members are grouped according to their functional roles, and the inner diameter of the cross-section in each design group is defined as a design variable. Structural optimization is carried out using a genetic algorithm to minimize the total weight of the structure. To satisfy the conservative safety standards in the offshore field, both the maximum stress and the unity check criteria are considered as design constraints during optimization. For enhanced safety confidence, extreme environmental conditions are assumed. The maximum marine attachment thickness and the section erosion in the splash zone are applied. Additionally, the design load is defined as the force induced by extreme waves, winds, and currents aligned in the same direction. All the loading directions surrounding the structure are considered to design the structure in a balanced and safe manner. As a result, compared with the current structure, the proposed structure features a 45% lighter design, satisfying the strict offshore safety criteria.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.53-65
• /
• 2021

While the hydrogen refueling station is rapidly expanded and installed, the safety inspection of the hydrogen pressure vessel in the station should be very important. Of these, according to ASME, hydrogen embrittlement tests must be performed for hydrogen vessel that store hydrogen above a certain pressure. The main test method for hydrogen embrittlement inspection is to carry out fracture tests and fatigue fracture tests in a high pressure hydrogen atmosphere, which allows the durability limit of the pressure vessel to be measured and the endurable limit to be determined in the hydrogen atmosphere. In detail, the critical crack depth can be calculated by the stress intensity factor(K), and the service life can be determined by da/dN (fatigue growth rate). API579-1/ ASME FFS-1 part 9 exemplifies the calculation method according to the mode of crack-like flaws, but for various shapes such as plates and cylinders, there are about 55 modes according to the shape and location of the crack. Due to the fairly complex formula, it is not easily accessible. In this study, we will show you how to calculate fracture mechanics numerically via Excel and VBA. In addition, this was applied to analyze the effects of the thickness and inner diameter of the pressure vessel on the service life.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.119-126
• /
• 2022

Mini-implant has been reported as an alternative method to conventional diameter implants in the treatment of mandibular anterior region with narrow ridge. However, one-piece type mini-implant showed biological and technical complications, such as peri-implantitis by residual cement and prosthetic detachment. Recently, one-piece type mini-implant with additional retentive structure has been introduced to increase the retention and stability of the mini-implant. The mini-implant is based on spreading the upper retentive structure with a spreader and connected it with the inner surface of the zirconia prosthesis. In two cases, we tried to reduce these complications through the mini-implant on the narrow mandibular anterior region, and it was possible to reduce the overall treatment period through a digital system. In this case report, restoration using the digital mini-implant system showed improvement of patient satisfaction on the aspect of function and esthetic in the narrow mandibular anterior region.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.535-547
• /
• 2021

A policy to expand the hydrogen economy has been established in Korea and the supply of FCEV is being expanded to realize a hydrogen society. Therefore, the supply of FCEV is expected to increase rapidly, and a solution to respond to accidents of FCEV is required. In this study, an experimental study was conducted to analyze the effect of the hydrogen jet flame generated by a FCEV on the inner wall of the tunnel and the characteristics of the internal radiant heat. For the experiment, the initial pressure of hydrogen tank was set to 700 bar, and the injection nozzle diameter was set to 1.8 mm in order to make the same as the conditions generated in the FCEV. In addition, a tunnel fire resistance test specimen having the same strength as the compressive strength of concrete applied to general tunnels of 40 MPa was manufactured and used in the experiment. The results were analyzed for the separation distance (2 m and 4 m) between the hydrogen release nozzle and the tunnel fire resistance test concrete. As the result, the maximum internal temperature of the test concrete was measured to 1,349.9℃ (2 m separation distance), and the radiant heat around the jet flame was up to 39.16 kW/m².

• Journal of Integrative Natural Science
• /
• v.16 no.1
• /
• pp.13-31
• /
• 2023

The sesarmid crab Muradium tetragonum, inhabiting the mangrove, are considered as a key consumer of litter and thereby play an important role in the detritus food chain and energy flow in the mangrove ecosystem. The present investigation was carried out with objectives to enlighten the reproductive system of Muradium tetragonum through histological and histochemical studies. Histological organization of the testis of M. tetragonum revealed that each testis has a lobular structure consisting of several testicular lobules arranged around the collecting duct. Histology of the deferens of M. tetragonum revealed it to be composed of three-layer of tissues along the entire length:the outer connective tissue, the middle muscular and the inner epithelial layer. Based on the histological architecture these three regions are recognized as proximal vas deferens (PVD), middle vas deferens (MVD) and distal vas deferens (DVD). Histological characteristics of the ovary of M. tetragonum during different phases of ovarian development were studied. Based on the colour changes of the ovary and diameter of the oocytes five stages of ovarian development can be pronounced. Histochemical analysis of the male reproductive tissues of M. tetragonum signifies the secretion of a different biomolecule by specifying their origin in the reproductive tissue and their possible transformation into spermatophores. In the female reproductive tissues, histochemical evaluation envisaged the secretory products during different stages of ovarian development The secretory substances of the spermatheca expound on the significance of its secretion in dehiscing the spermatophore wall and in nourishing as well as protecting the spermatozoa.