• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.154-162
• /
• 2015

We have performed accelerated photo-degradation test using a 10-Sun level high irradiance $Weather-Ometer^{(R)}$ (10-Sun Ci5000) in an attempt to study acceleration and correlation between accelerated and service conditions for ink-jet ink. The accelerated test was used to predict lifetimes of ink-jet ink through the calculation of scaling factor for intensity of irradiance and duration of usage combined with estimation of lifetime distribution and inverse power model as a life-stress model. The lifetimes and acceleration factors for foreign and domestic inks were compared with each other. The results showed that the failure mechanisms and life-stress models for ink-jet ink were different among the color of ink which means that we might be in need of further study by color of inks.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.87-99
• /
• 2010

The ink which is left by sealed more than 6 months, it clogs head nozzle of machine due to precipitation and coagulation. In addition, if you stop printing about 3~4 hours in the middle of printing work, the head nozzles of printer could be naturally clogged. To prevent of this situation, worker should implement cleaning and checking head nozzle before hands. When the nozzle is clogged in the middle of work, running a head cleaning mode can clear the clogged nozzle. Yet, large amount of waste inks which are passed clogged nozzle will be remained after cleaning. It would be very nice that ink companies take the waste ink back by green marketing, but none of them are doing it currently. The purpose of this research is that making a black water-based recycle ink by waste inks which are left of nozzle clogging or passed expiration date. This recycle ink will improved working environment and reduce cost of disposing waste inks. Furthermore, it is very environment friendly and economical. It is called a recycle ink which is water-based black ink made by waste inks.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.8-13
• /
• 2012

The flexography ink has disadvantage in a deinking process because it tends to form too fine particles in alkali condition to be removed in flotation deinking. The influence of pH conditions on the particle size of phthalocyanine cyan ink used for flexo-printing was investigated to see the effect of pH conditions on flexography ink dispersion. Flexography ink particles prepared by grinding dried ink films were used in this experiment. Greater reduction of the ink particle size was noticed under alkaline pH condition, which was attributed to dissolution of resin component of the ink. Adsorption behavior of flexography ink onto pigment particles was examined using clay and talc as substrate pigments. Pretreatment of inorganic pigments with a cationic poly-DADMAC increased the surface adsorption of flexography ink particles, which improved the removal of the inks by centrifugal sedimentation of inorganic pigments. Most efficient removal of the ink particles was achieved when an optimal addition level of the cationic polymer was used for pretreatment of inorganic pigments, and this optimal addition level corresponds to the surface saturation point of the polyelectrolyte. Adsorption of flexography ink particles onto inorganic pigments improved the ink removal in flotation deinking since the pigment particles has the optimal particle size for flotation deinking.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.73-80
• /
• 2014

Ink-jet printing technology has been widely attractive due to its facility for direct and fine printing on various substrates. Recent studies have focused on expanding the application of ink-jet printing technology from general consumer use and design companies to the prototype production of precision parts and parts manufacturing. The use of ink-jet printing technology in decorated tableware, tiles, and other ceramic products also has many advantages. The printing process is fast and can be adaptable to various kinds of objects because there is no direct contact point between the printer and the substrates to be printed. For application to ceramic product decoration, inks containing highly dispersed inorganic nano-pigments are required. Here we report the synthesis and characterization of blue $CoAl_2O_4$ nanopigment for ink-jet printing. Blue ceramic ink based on the obtained $CoAl_2O_4$ pigment was prepared by dissolving $CoAl_2O_4$ pigment in a mixed solution of ethylene glycol and ethanol with volume ratios of 7:3 and 8:2, respectively, to obtain the appropriate viscosity for ink-jet printing. The ink solution contained 15 wt% of $CoAl_2O_4$ pigment and Cetyltrimethyl ammonium bromide(CTAB) and Sodium dodecyl sulfate(SDS) as dispersive agents. The prepared blue ceramic ink was stably jetted and formed a sphere-shaped droplet from an ink-jet printer.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.77-84
• /
• 2012

The lithographic process depends on a satisfactory ink-in-water emulsion being formed during printing and the speed of wet presses makes the choice of fountain solution vitally important as the ink and fount must react quickly to form a stable emulsion. Ink and water come into contact with each other on the rolls of the press and are forced together in the roll nips. The water is not soluble in the ink since it is slightly fat. Instead, an emulsion is formed, a heterogeneous mass consisting of small water drops mixed into the ink, if the water feed is too great. This emulsification can affect the properties of an off-set ink and negatively affect the printability. So we investigated the effects of the emulsification of phenol free heat-set ink and existing heat-set ink on printed quality, such as amount of ink transfer, printed density, print-through and uniformity. We used Duke emulsification tester for the emulsification of inks, and used IGT printability tester for printed quality. The printed quality were measured by densitometer and were evaluated by the image analysis system. Compared to conventional printing ink, phenol-free ink showed better results of the printability at the emulsification.

• 한국미생물·생명공학회지
• /
• 제32권1호
• /
• pp.72-77
• /
• 2004

본 연구진은 토양미생물의 배양액으로부터 cyclin-dependent kinase 저해활성의 Toyocamycin을 분리하였으며 〔16〕, 화학적 전합성을 통하여 활성이 개선된 유도체인 신물질 MCS-5A를 합성하였다〔3〕. 이 MCS-5A를 이용한 항암 기전규명을 위한 연구를 통하여 , human promyelocytic leukemia cell(HL-60)에서 MCS-5A에 의해 cyclin-dependent kinase inhibitor p16$^{INK4A}$ 단백질의 발현증가가 암세포의 세포주기 억제와 동시에 HL-60 cell희 세포사멸을 유도하는 것을 확인하였다(data not shown). 그러나 HL-60 cell의 경우와는 달리 non small cell lung cancer cell(NSCLC)인 A549 cell(p16$^{INK4A}$ 결핍 세포주)에 MCS-5A를 처리할 경우에는 전혀 세포사멸이 유도되지 않았다. 따라서 MCS-5A에 의한 HL-60 cell에서의 세포사멸 유도는 발암억제 유전자인 P16$^{INK4A}$의 세포 내 발현 및 존재 여부에 의해 좌우되는 것으로 판단되었다. 이러한 배경에서 본 연구는 p16$^{INK4A}$.의 기존에 알려진 세포주기 억제를 유발하는 cyclin-dependent kinase inhibitor(CKI)로서의 역할 뿐 아니라, p16$^{INK4A}$ 유전자가 세포사멸을 유도할 수 있다는 새로운 기능을 규명하기 위하여 다음의 연구를 시도하였다. 즉 $p^{INK4A}$ 결핍 세포주인 A549(-p16/+p53)와 H1299(-pl6/-p53) 그리고 p16$^{INK4A}$ 함유 세포주인 HeLa(+p16/+p53)세포에 외부로부터 p16$^{INK4A}$ 유전자를 도입시켜, 각 세포주에서의 세포사멸 유도 여부를 비교하고자 하였다. 우선 wild-type p16$^{INK4A}$ 유전자를 가진 HeLa cell에서 총 RNA를 추출하여, 역전사 반응으로 cDNA를 만들고, PCR을 통해 p16$^{INK4A}$ 유전자를 증폭하였다. pcDNA3.1/His is A vector에 p16$^{INK4A}$ 유전자를 끼워 넣고 competent cell (XL1-Blue)에 형질 전환하여 cloning한 후, p16$^{INK4A}$ clone을 다량으로 추출하였다. 위에 언급한 각각의 cell line에 p16$^{INK4A}$유전자를 농도(0, 1, 5, 10$\mu\textrm{g}$)별로 transfection 시킨 후, p16 단백질을 일정 시간 동안(12시간) 발현시킨 뒤, TUNEL등의 분석을 통해 세포사멸이 유도되는지를 확인하였으며, 또한 Western blot 분석을 통하여 p16단백질과 세포사멸 유도 인자인 caspase 3의 발+현 양상을 확인하였다. 연구 결과, Western blot을 통해 transfection시킨 p16/INK4A/유전자의 농도에 따라 각각의 cell line에서 Pro-caspase 3의 감소함을 관찰할 수 있었고, TUNEL분석을 통해 A549및 HeLa cell에서 세포사멸이 유도됨을 확인할 수 있었다 특히 A549(-p16/+p53)와 HeLa cell(+p16/+p53)에서는 TUNEL 분석 및 Western blot을 통한 pro-caspase 3의 caspase 3로의 전환 등을 통해 세포사멸이 발생하였음을 확연하게 확인할 수 있었으나, 반면 H1299(-pl6/-p53) cell에서는 단지 Western blot을 통한 pro-caspase 3의 활성화만을 통해 간접적으로 세포사멸을 확인 할 수 있었다. 또한 p53이 결핍된 H1299(-pl6/-p53)세포주에서의 $^{INK4A}$ 에 의한 세포사멸 유도는 p53 비의존적으로 작용한다는 사실을 확인할 수 있었다. 결론적으로 발암억제 유전자인 $^{INK4A}$ 는 CKI로서의 기능뿐 아니라, 세포사별 유도와도 밀접하게 관련되어 있으며, 이 기능은 발암 억제 유전자인 p53과는 독립적으로 작용한다는 사실을 확인하였다. 세포사멸 유도 기전연구에서 $p16^{INK4A}$ 가 세포사멸을 유도하는 기전에 대해서는 아직 명확하게 밝혀진 바는 없으며, 현재 본 연구실에서 다양한 실험을 통해 연구가 진행 중이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1719-1721
• /
• 2007

Major display equipment suppliers have introduced equipment using ink jets for manufacturing steps such as printing the polyimide alignment layer and printing color filters. This paper will discuss the status of ink jets as precision deposition tools and the new technology being introduced for ink jet manufacturing.

• 한국결정성장학회지
• /
• 제27권5호
• /
• pp.256-262
• /
• 2017

$1000^{\circ}C$ 이상의 고온에서도 안정적인 발색 특성을 보이는 세라믹 잉크를 활용한 디지털 프린팅 기술은 우수한 내구성을 가지는 제품을 다양한 디자인을 적용하여 생산할 수 있는 친환경 공정이라는 장점으로 인해 최근 관심이 높아지고 있다. 특히 건축용 세라믹 타일 산업에서 잉크젯 프린팅 기술 도입을 통한 디지털 공정으로의 전환은 점점 가속화되고 있으며, 이와 관련된 프린팅 시스템 및 고온발색 세라믹 잉크에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 세라믹 타일의 표면 유약층에서 고온발색 세라믹 잉크의 인쇄적성을 분석하였다. 디지털 4원색인 Cyan, Magenta, Yellow, Black 색상의 고온발색 세라믹 잉크가 프린팅된 세라믹 타일의 표면 및 단면의 미세구조를 분석함으로써 세라믹 잉크의 종류에 따른 인쇄특성에 대해 비교하였다. 또한 고온 열처리 공정이 필수적으로 요구되는 세라믹 소재의 특성상 잉크젯 프린팅 후 세라믹 잉크 패턴의 열처리 공정에 따른 거동변화에 관하여 고찰하였으며, 세라믹 타일 유약층에서 세라믹 잉크의 인쇄적성은 미세구조 및 고온 소성 과정에 큰 영향을 받고 있음을 확인하였다.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.35-45
• /
• 2012

Need color separation process to appear number of minimum printing plate waterway maximum printing color at printing process. This time, printing plate is separated three primary colors of C(cyan), M(magenta), Y(yellow). Appear all colors of printing such three primary colors. But, three primary color ink appears 100% dark gray that is not clean as chroma is neared color to 0 because is not pure. As well as, the ink area rate that is whole by over print amount increase of three primary is expanded. As a result, influence in secondary printablity set-off growth by inaccurate color reproduction and ink dry badness, trapping efficiency decline etc.. Apply ink saving method that is replaced as K ink in consisted dark color constituent because three primary colors are over print each other adding one more K(black) plate by method to improve these problem. Therefore, can reduce extension of the total ink area rate, and help in correct color appearance control. As well as, eco-friendly printing process attains improving printablity at the same time curtailment of printing expense by reducing requirement of total ink. Usually, there are UCR(under color removal) and GCR(gray component replacement) to ink saving application method. But, the practical use limit is insufficient state to tribe of technological investigation or field application about these method in domestic printing field. Therefore, in this research, ink saving been bringing by one method of eco-friendly printing confirmed that is applicable in usual domestic printing environment. Also, searched result getting in printablity by ink saving application.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.51-63
• /
• 2010

Ink-jet is part of the non impact printing that shooting the ink drop from the nozzle to paper. It is very silence and express good color. There are two types of printing that continuous and drop on demand. But drop on demand process is becoming the mainstream. these days, LCD, PDP is passed more than semiconductor industry. And we expect organic EL, FED as a next display. But product equipment, main component and technology have a gap between an advanced country and us nevertheless physical development. Expecially, previous process part is depended on imports. Ink-jet printing technology that there isn't complicated photo lithography process is attracted, so ink-jet printing resolution is more embossed. But there were not many of ink-jet resolution thesis but ink-jet head or nozzle. Because, to out of the ink from the nozzle is unseeable and hard to experiment. Therefore this thesis was experimented and simulated how can ink-jet printer improved resolution by flow-3d simulation package program.