• Structural Engineering and Mechanics
• /
• v.31 no.1
• /
• pp.11-24
• /
• 2009

In China, the oil and natural gas resources of Bohai Bay are mainly marginal oil fields. It is necessary to build both ice-resistant and economical offshore platforms. However, risk is involved in the design, construction, utilization, maintenance of offshore platforms as uncertain events may occur within the life-cycle of a platform under the extreme ice load. In this study, the optimum design model of the expected life-cycle cost for ice-resistant platforms based on cost-effectiveness criterion is proposed. Multiple performance demands of the structure, facilities and crew members, associated with the failure assessment criteria and evaluation functions of costs of construction, consequences of structural failure modes including damage, revenue loss, death and injury as well as discounting cost over time are considered. An efficient approximate method of the global reliability analysis for the offshore platforms is provided, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. The proposed life-cycle optimum design formula are applied to a typical ice-resistant platform in Bohai Bay, and the results demonstrate that the life-cycle cost-effective optimum design model is more rational compared to the conventional design.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.97-109
• /
• 1973

1. The relatively lower prehardening temperature was more effective on increase of the hardiness of the intermediately hardy varieties than the higher one but either the extremely hardy or nonhardy varieties did not respond to the temperature as much as the intermediate types. 2. Five degree Centigrade was generally more favorable than $2^{\circ}C$ on hardening of the plants, especially when frozen at higher temperature for shorter duration. 3. It appears that photoperiod during prehardening and hardening did not play so important role as temperature on the hardiness. 4. The higher the soil moisture content, the higher the frost injury occurred. 5. Application of nitrogen increased markedly the hardiness and % DM of the plants. Percentage of dry matter of young seedlings might be used as an easy and rough criterion for evaluating hardiness since there was a highly significant regression of varietal frost injury on the %DM. 6. Four days appeared to be enough for hardening of plants although the plants increased gradually the hardiness as duration of hardening extended. Dehardening of the plants at relativity higher temperature took place rapidly within one to four days. 7. Under this controlled environment, freezing at about $-8^{\circ}C$ for 24 hours seemed the best for the purpose of evaluating the hardiness to low temperature. 8. It is believed that assessment of frost injury should be done at least one week after freezing. Some varieties showed strong ability to recover from the damage as recovery period was extended. 9. As a whole, Cd 80 and 83 were the most hardy and followed by Cappelle and Maris Otter. Four. winter oats varieties and Jufy I belonged to the intermediate type while the other three spring varieties were nonhardy at all. Peniarth was comparable with Maris Otter in hardiness. S 147 appeared the least hardy among the winter oats varieties. 10. It is evident that water-soluble carbohydrate content is associated with the hardiness to some extent but not primary factor involved in hardiness.

• Composites Research
• /
• v.37 no.1
• /
• pp.46-52
• /
• 2024

The development of transportation methods has improved human transportation convenience and made it possible to expand the travel radius of people with disabilities who have difficulty moving. However, in the case of WAV (wheelchair Accessible Vehicle), the safety that may occur in a vehicle accident is still lower than that of regular passenger seats. In particular, in the case of a rear-end collision that may occur in a defenseless situation, it can cause fatal neck injuries to disabled passengers. Therefore, a more detailed design plan must be reflected in the headrest to be applied to WAV. In this study, a multi-cell headrest was proposed to implement local compression characteristic distribution of the headrest during rear-end collision of WAV. Afterwards, a correlation analysis was performed between the passenger's NIC (Neck Injury Criterion) and impact energy absorption using the data set construction through analysis and the clustering results using k-means clustering. As a result of clustering, it was confirmed that data clusters with similar characteristics were formed, and a correlation analysis between NIC and impact energy absorption through the characteristics of each cluster was performed. As a result of the analysis, it was confirmed that the softer the cell compression characteristics in Mid3 and Mid6, the more impact energy absorption increases, and the harder the cell compression characteristics in Front2, Mid3, and Mid6, the more effective it is in reducing NIC.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.395-402
• /
• 2005

Recently Multidisciplinary Design Optimization Based on Independent Subspaces (MDOIS), an MDO (multidisciplinary design optimization) algorithm, has been proposed. In this research, an MDO problem is defined for design of a belt integrated seat considering crashworthiness, and MDOIS is applied to solve the problem. The crash model consists of an airbag, a belt integrated seat (BIS), an energy absorbing steering system, and a safety belt. It is found that the current design problem has two disciplines - structural nonlin- ear analysis and occupant analysis. The interdisciplinary relationship between the disciplines is identified and is addressed in the system analysis step in MDOIS. Interdisciplinary variables are belt load and stiffness of the seat, which are determined in system analysis step. The belt load is passed to the structural analysis subspace and stiffness of the seat back frame to the occupant analysis subspace. Determined design vari- ables in each subspace are passed to the system analysis step. In this way, the design process iterates until the convergence criterion is satisfied. As a result of the design, the weight of the BIS and Head Injury Crite- rion (HIC) of an occupant are reduced with specified constraints satisfied at the same time. Since the system analysis cannot be formulated in an explicit form in the current example, an optimization problem is formu - lated to solve the system analysis. The results from MDOIS are discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1758-1764
• /
• 2012

A large number of wire rope has been used in various inderstiries as Cranes and Elevators from expanding the scale of the industrial market. But now, the management of wire rope is used as manually operated by rope replacement from over time or after the accident.It is caused to major accidents as well as economic losses and personal injury. Therefore its time to need periodic fault diagnosis of wire rope or supply of real-time monitoring system. Currently, there are several methods has been reported for fault diagnosis method of the wire rope, to find out the feature point from extracting method is becoming more common compared to time wave and model-based system. This method has implemented a deterministic modeling like the observer and neural network through considering the state of the system as a deterministic signal. However, the out-put of real system has probability characteristics, and if it is used as a current method on this system, the performance will be decreased at the real time. And if the random noise is occurred from unstable measure/experiment environment in wire rope system, diagnostic criterion becomes unclear and accuracy of diagnosis becomes blurred. Thus, more sophisticated techniques are required rather than deterministic fault diagnosis algorithm. In this paper, we developed the fault diagnosis of the wire rope using probability density estimation techniques algorithm. At first, The steady-state wire rope fault signal detection is defined as the probability model through probability distribution estimate. Wire rope defects signal is detected by a hall sensor in real-time, it is estimated by proposed probability estimation algorithm. we judge whether wire rope has defection or not using the error value from comparing two probability distribution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.163-170
• /
• 2000

Accident statistics shows that the portion of fatal occupant injuries due to side impacts is considerably high. The side impact usually leads to a severe intrusion of side structure into the passenger compartment. Furthermore, the safety zone for the side impact is relatively small compared to the front impact. Those kinds of physics for side impact frequently result in a fatal injury for the occupant. Therefore, NHTSA and EEVC are trying to intensify the regulation for the occupant protection against side impact. Both the regulation and recent market trends are asking for an installation of side airbag. There are several types of system configuration for side impact sensing. In this paper, we adopt the acceleration-based remote sensing method for the side airbag control system. We mainly focus on the development of hardware and crash discrimination algorithm of remote sensing unit. The crash discrimination algorithm needs fast decision of airbag firing especially for high-speed side impact such as FMVSS 214 and EEVC tests. It is also required to distinguish between low-speed fire and no-fire events. The algorithm should have a sufficient safety margin against any misuse situation such as hammer blow, door slam, etc. This paper introduces several firing criteria such as acceleration. velocity and energy criteria that use physical value proportional to crash severity. We have made a simulation program by using Matlab/Simulink to implement the proposed algorithm. We have conducted an algorithm calibration by using real crash data for 2,500cc vehicle. The crash performance obtained by the simulation was verified through a pulse injection method. It turned out that the results satisfied the system requirements well.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.2
• /
• pp.137-148
• /
• 2011

In this paper, we systematically investigate regional differences of the dead due to injuries in cities, towns and counties about transportation accidents, suicides and fall accidents, which have recently been an important issue of health problems in Korea, The data are from the Annual Report on the Cause of Death Statistics in Korea in 2008. They include the deaths over the age 19 from transportation accidents, suicides and fall accidents with the criterion of the International Statistical Classification of Diseases. Poisson HGLM is applied to estimate the mortality rate under the assumption that the number of deaths follow a Poisson distribution, by considering regions as random effects and by adjusting age, sex and standardized residence tax as fixed effects. Using the results of random effects prediction, the regional differences in cities, counties and towns are marked in disease mapping. The results showed that there were significant regional differences of mortality rates for transportation accidents and suicides, but no significant differences for fall accidents.

• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.85-88
• /
• 1985

Leakage of electrolytes from leaf discs of treated bean (Phaseolus velgaris L.) plant was the criterion used to investigate the effect of four herbicides on the permeability of leaf-cell membrane. CGA 82725 (2-propynyl 2-((3, 5-dichloro-2 pyridinyl) oxy) phenoxy prpanate) at $10^{-3}M$ increased significantly cell membrane permeability within 1 h after 12 h treatment. Significant increase in cell membrane permeability was also detected at $10^{-2}M$ of DOWCO 453 (Haloxy-methyl 2-(4 (3-chloro- 5-(trifuluoromethyl)-2-pyridinyl) phenoxy) propanate. The effect of dinoseb (2-(1-methylpropyl)-4, 6-dintrophenol) on cell premeability was detected at $10^{-4}M$ after 12h. The highest conductivity measurement was obtained from paraquat (1, 1'- dimethyl-4, 4'-bipyridinium ion). Increase in cell membrane permeability was not always associated with injury symptoms such as appearance of necrotic area in leaves.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.102-114
• /
• 2018

The Railway Safety Management System is based on risk management and the basic purpose of risk management is safety management activities to prevent railway accidents and operational obstacles in advance. In order to manage risk, an acceptable risk standard must be established. This risk criterion is used to evaluate the railway risk with both frequency and severity. In the case of overseas railway or other industrial sectors, various factors are reflected in the main variables that constitute the occurrence frequency, but this is no the case in the domestic railway sector. In particular, the current risk assessment criteria in the railway sector remain at a level that exploits the incidents that have occurred in the past and the severity of the property damage and it dose not properly reflect complex and diverse environmental and situational changes in railway operations. Therefore, in this study, it is possible to calculate the potential occurrence of future events instead of occurrence frequency as a component of the risk assessment criteria, focusing on the High-Speed Railway. In addition to the property damage to the consequence, we suggest a rational methodology, development direction, and theoretical implications for constructing accurate and reasonable risk criteria including actual damage such as human injury and time loss.

• Journal of the Korean Society of Safety
• /
• v.37 no.3
• /
• pp.52-59
• /
• 2022

Conventionally, all the unsafe acts by human beings in relation to industrial accidents have been regarded as unintentional human errors. Exceptionally, however, in the cases with fatalities, seriously injured workers, and/or losses that evoked social issues, attention was paid to violating related laws and regulations for finding out some people to be prosecuted and given judicial punishments. As Heinrich stated, injury or loss in an accident is quite a random variable, so it can be unfair to utilize it as a criterion for prosecution or punishment. The present study was conducted to comprehend how categorizing intentional violations in unsafe acts might disrupt conventional conclusions about the industrial accident process. It was also intended to seek out the right direction for countermeasures by examining unsafe acts comprehensively rather than limiting the analysis to human errors only. In an analysis of 150 industrial accident cases that caused fatalities and featured relatively clear accident scenarios, the results showed that only 36.0% (54 cases) of the workers recognized the situation they confronted as risky, out of which 29.6% (16 cases) thought of the risk as trivial. In addition, even when the risks were recognized, most workers attempted to solve the hazardous situations in ways that violated rules or regulations. If analyzed with a focus on human errors, accidents can be attributed to personal deviations. However, if considered with an emphasis on safety rules or regulations, the focus will naturally move to the question of whether the workers intentionally violated them or not. As a consequence, failure of managerial efforts may be highlighted. Therefore, it was concluded that management should consider unsafe acts comprehensively, with violations included in principle, during accident investigations and the development of countermeasures to prevent future accidents.