• 지질공학
• /
• 제31권1호
• /
• pp.19-30
• /
• 2021

본연구에서는 가뭄이 빈번히 발생하는 지류 상류 지역에서 농번기에 부족한 물을 확보하기 위하여 평상시 잉여의 물을 지하 대수층에 주입하는 인공함양 방식을 설계함에 앞서 적정 주입량 및 주입효율을 수치모델을 활용하여 평가하고자 하였다. 인공함양 수치모델 대상지역은 홍성군 갈산면 운곡리 일대를 대상으로 하였으며 다양한 공당 주입량 조건과 대수층의 수리적 특성을 고려하여 모델링을 수행한 결과, 연구지역의 공당 적정주입량은 50.0 ㎥/day/공로 평가되었으며 주입효율은 총 주입용량 대비 33.2~81.2%로 예측되었다. 특히, 주입효율은 주입시간이 짧을수록 비선형으로 증가하는 양상을 보였으며 잔류 저류용량은 총 주입용량이 많을수록 증가하여 물부족 시 사용 가능량이 많아지므로 보다 유리할 것으로 보였다. 향후 보다 정확한 함양효율 평가를 위해 현장 실증시험 결과를 활용하여 모델을 검증하고 이를 통해 주입 및 취수에 대한 적정 시나리오를 구축한다면 보다 효율적인 인공함양 시스템의 운영이 가능할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3224-3229
• /
• 2007

This study aims to analyse the influence of steam injection on the performance of hybrid systems combining a solid oxide fuel cell and a gas turbine. The steam is generated by recovering heat from the exhaust gas. Two system configurations, with difference being the operating pressure of the SOFC, are examined and effects of steam injection on performances of the two systems are compared. Two representative gas turbine pressure ratios are simulated and a wide range of both the fuel cell temperature and the turbine inlet temperature is examined. Without steam injection, the pressurized system generally exhibits better system efficiency than the ambient pressure system. Steam injection increases system power capacity for all design cases. However, its effect on system efficiency varies much depending on design conditions. The pressurized system hardly takes advantage of the steam injection in terms of the system efficiency. On the other hand, steam injection contributes to the efficiency improvement of the ambient pressure system in some design conditions. A higher pressure ratio provides a better chance of efficiency increase due to steam injection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.165-167
• /
• 2001

Emitter injection efficiency of p+/n-buffer Junction with Gaussian impurity distribution is presented. This model takes into account the variation of the carrier lifetime with injection level which allows a unified interpretation of the injection efficiency for all injection level. The injected carrier density and injection efficiency of the anode are calculated as a function of the current density with the low level lifetime as a parameter for different thicknesses of the anode. The analytical results agree well with simulation.

• Korea-Australia Rheology Journal
• /
• 제20권2호
• /
• pp.79-88
• /
• 2008

In this study, we focus on the improvement of the filling efficiency in injection molding by application of ultrasonic vibration. While studies about the filling efficiency of typical filling processes in the injection molding have been widely performed, there have been only few studies about the filling efficiency of an ultrasonic process. The effect of the ultrasonic vibration is an important process condition, which influences the flow characteristics of polymer melt. This new condition even affects well-known injection conditions such as cavity pressure, injection temperature and mold temperature. For this study, we carried out a numerical analysis by appropriate modeling and analysis of the ultrasonic process in the filling process. To verify this numerical analysis, we compared the numerical results with the experimental data. Also, we analyzed the filling process in a thin cavity using this numerical analysis. To understand the flow characteristics of polymer melt in the ultrasonic process, we substituted real and complex vibration conditions with simplified and classified conditions according to the position of vibrating cavity surfaces and the phase difference between two opposing cavity surfaces. We also introduced MFR (melt flow ratio) as a new index to estimate the filling efficiency in the ultrasonic process.

• 한국유체기계학회 논문집
• /
• 제12권2호
• /
• pp.46-51
• /
• 2009

Recently, microturbines have received attention as a small-scale distributed power generator. Since the exhaust gas carries all of the heat release, generating hot water is usual method of heat recovery from microturbine CHP (combined heat and power) systems. The power of microturbines decreases as ambient temperature increases. This study predicted micoturbine power boost by injecting hot water generated by heat recovery. Influence of injecting water at two different locations was examined. Water injection improves power, but efficiency depends much on the injection location. Injecting water at the compressor discharge shows a much higher efficiency than the combustor injection. However, the combustor injection may have as much available cogeneration heat as the dry operation, while the available heat in the compressor discharge injection is much smaller than the dry operation.

• 자원환경지질
• /
• 제45권3호
• /
• pp.307-315
• /
• 2012

본 연구에서는 보통 포틀랜드 시멘트 OPC(Ordinary Portland Cement)와 MIS(Micro-Injection Process System) 공법에서 사용하고 있는 마이크로 시멘트의 지반 침투성능을 평가하기 위해 실내모형시험을 수행하였다. 이를 위해 그라우트 주입을 일정한 방법으로 재현할 수 있는 가압침투주입장치를 제작하였으며 공시체 제작방법을 마련하였다. 물시멘트비를 5:1에서 1:1까지 변화하여 주입시험을 수행한 결과 물시멘트비가 증가함에 따라 침투성능이 선형적으로 증가하였으며 주입성능을 비교하면 상대적으로 비표면적이 큰 MIS가 OPC보다 동일한 배합비에서 침투성능이 우수한 것으로 나타났다. 특히 물시멘트비가 2:1~1:1의 부배합에서 OPC의 침투성능이 매우 낮은 것으로 관찰되었다. 또한 침투량과 주입시간과의 관계곡선을 hyperbolic으로 모델링하여 예측치를 산정하고 이를 측정치와 비교한 결과 그라우트 성능평가에 대한 hyperbolic 모델의 잠재력이 검증되었다.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.297-301
• /
• 2002

We investigated the effect of electron injection layer on the performance of organic light emitting devices (OLEDs). As an electron injection layer, the quinolate metal complexes were used. We optimized the device efficiency by varying the thickness of the quinolate metal complexes layer. The device with 1 nm of the quinolate metal complexes layer showed significant enhancement of the device performance and device lifetime. We also compared the effect of 8-hydroxyquinolinolatolithium (Liq) with that of bis(8-quinolinolato)-zinc ($Znq_{2}$) and 8-hydroxyquinolinolatosodium (Naq) as an electron injection layer. As a result, Liq is considered as a better materials for the electron injection layer than $Znq_{2}$ and Naq.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권3호
• /
• pp.35-48
• /
• 2016

A micromodel was applied to estimate the effects of geological conditions and injection methods on displacement of resident porewater by injecting scCO₂ in the pore scale. Binary images from image analysis were used to distinguish scCO₂-filled-pores from other pore structure. CO₂ flooding followed by porewater displacement, fingering migration, preferential flow and bypassing were observed during scCO₂ injection experiments. Effects of pressure, temperature, salinity, flow rate, and injection methods on storage efficiency in micromodels were represented and examined in terms of areal displacement efficiency. The measurements revealed that the areal displacement efficiency at equilibrium decreases as the salinity increases, whereas it increases as the pressure and temperature increases. It may result from that the overburden pressure and porewater salinity can affect the CO₂ solubility in water and the hydrophilicity of silica surfaces, while the neighboring temperature has a significant effect on viscosity of scCO₂. Increased flow rate could create more preferential flow paths and decrease the areal displacement efficiency. Compared to the continuous injection of scCO₂, the pulse-type injection reduced the probability for occurrence of fingering, subsequently preferential flow paths, and recorded higher areal displacement efficiency. More detailed explanation may need further studies based on closer experimental observations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.439-440
• /
• 2007

To enhance the electron injection from the cathode of organic light-emitting diodes (OLEDs), We have studied characteristics of device that electron injection layer(EIL) is inserted between emissive layer and cathode. We fabricated bi-layer cathode $Li_2O$(x nm)/Al(100nm) and LiF(x nm)/Al(100nm) using LiF and $Li_2O$ as an electron injection layer. We analyzed the current efficiency, luminance efficiency, and external quantum efficiency of the device by varying the thickness of $Li_2O$ and LiF to be 0.5nm, 1nm, or 3nm. Using the EIL, we have obtained the efficiency of 7cd/A and the luminance of $20,000cd/m^2$. There is an improvement of efficiency by more than 3 times than the device without the $Li_2O$ layer.

• 한국지반공학회논문집
• /
• 제26권9호
• /
• pp.47-58
• /
• 2010

본 논문에서는 2.0 Shot 방식의 최적 주입비를 산정하고 이에 대한 주입시간과 강도에 대한 검증을 실시하였다. 따라서 본 연구를 수행하기 위하여 유제거동 지배방정식을 이용하여 최적 주입비를 산정하고 이에 대한 실내실험과 현장실험을 실시하였다. 실내실험은 주입비의 변화에 따른 주입시간의 비교, 재령과 공극비의 변화에 따른 강도 특성을 예측하기 위한 호모겔과 샌드겔의 강도실험으로 구분하여 실시하였다. 연구결과 2.0 Shot 방식의 최적 주입비는 1:2 일 경우 침투가 가장 효율적으로 나타났다. 강도 실험에서도 다른 주입비에 비해 최적 주입비가 큰 강도를 발현하는 것으로 나타났다. 또한 현장실험을 통하여 현장에서도 높은 강도가 발현될 것으로 판단된다.