• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3923-3927
• /
• 2011

A noble method for pre-concentration and speciation of ultra trace As (III) and As (V) in urine and whole blood samples based on dispersive liquid-liquid microextraction (DLLME) has been developed. In this method, As (III) was complexed with ammonium pyrrolidine dithiocarbamate at pH = 4 and Then, As (III) was extracted into the ionic liquid (IL). Finally, As (III) was back-extracted from the IL with hydrochloric acid (HCl) and its concentration was determined by flow injection coupled with hydride generation atomic absorption spectrometry (FI-HGAAS). Total amount of arsenic was determined by reducing As (V) to As (III) with potassium iodide (KI) and ascorbic acid in HCl solution and then, As (V) was calculated by the subtracting the total arsenic and As (III) content. Under the optimum conditions, for 5-15 mL of blood and urine samples, the detection limit ($3{\sigma}$) and linear range were achieved 5 ng $L^{-1}$ and 0.02-10 ${\mu}g\;L^{-1}$, respectively. The method was applied successfully to the speciation and determination of As (III) and As (V) in biological samples of multiple sclerosis patients with suitable precision results (RSD < 5%). Validation of the methodology was performed by the standard reference material (CRM).

• The Korean Journal of Pain
• /
• 제28권2호
• /
• pp.75-87
• /
• 2015

Background: Lumbar discogenic pain without pain mediated by a disc herniation, facet joints, or the sacroiliac joints, is common and often results in chronic, persistent pain and disability. After conservative treatment failure, injection therapy, such as an epidural injection, is frequently the next step considered in managing discogenic pain. The objective of this systematic review is to determine the efficacy of lumbar epidural injections in managing discogenic pain without radiculopathy, and compare this approach to lumbar fusion or disc arthroplasty surgery. Methods: A systematic review of randomized trials published from 1966 through October 2014 of all types of epidural injections and lumbar fusion or disc arthroplasty in managing lumbar discogenic pain was performed with methodological quality assessment and grading of evidence. The level of evidence was based on the grading of evidence criteria which, was conducted using 5 levels of evidence ranging from levels I to V. Results: Based on a qualitative assessment of the evidence for both approaches, there is Level II evidence for epidural injections, either caudal or lumbar interlaminar. Conclusions: The available evidence suggests fluoroscopically directed epidural injections provide long-term improvement in back and lower extremity pain for patients with lumbar discogenic pain. There is also limited evidence showing the potential effectiveness of surgical interventions compared to nonsurgical treatments.

• The Korean Journal of Pain
• /
• 제19권1호
• /
• pp.72-76
• /
• 2006

Background: The objective of this study was to describe the extent of pain relief after an epidural steroid injection in the patients suffering from chronic low back pain from herniated disks or lumbar spinal stenosis. Methods: The study was prospectively designed for patients suffering with lumbar spinal stenosis (LSS) and herniated disks (HD) who were referred to a hospital-based pain clinic for epidural steroid injections (ESI). The pain was assessed with using a visual analog scale at baseline, two weeks after the first ESI and two weeks after the third ESI. Results: Eighty patients were enrolled, and all of them provided pain ratings before and after the injections. The LSS patients seemed to improve less than did the HD patients. The results showed no significant differences in the triamcinolone dosage and the frequency of injections for determining the efficacy of ESI. Conclusions: The LSS patients tended to have a less effective respond to ESIs than did the HD patients. The unsatisfactory response to ESI by the LSS patients underscores the need for randomized controlled trials of performing ESI in this population.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.139-144
• /
• 2007

A micro cyclone combustor was developed to be used as a component of mobile power generator (MPG). The cyclone combustor was designed so that fuel and air were supplied to the combustion chamber separately to prevent a flash-back. The flame shape stabilized inside the micro cyclone combustor was visualized experimentally and the flow field and the combustion characteristics of the combustor were investigated numerically. The global equivalence ratio (${\Phi}$), defined using the fuel and air flow rates, was introduced to examine the overall flow and flame features of the combustor. The flame stabilization mechanism could be well understood using the velocity distribution inside the combustor. For only non-reacting case, it was found that a weak recirculating zone was formed upper the fuel-supplying tube in case of ${\Phi}$ < 1.0. It was also found that small regions that have a negative axial velocity exist near the fuel injection ports for both of non-reacting and reacting case. It was identify that a flame front was stabilized at the negative axial velocity regions near the fuel injection ports.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.424-433
• /
• 2006

This paper studies the field applicability of the Special Chemical grouting Method(SCM) in reinforcing and reducing permeability of the back of an existing continuous wall. SCM uses double rod which imposes intermediate pressure$(981\sim9,810kPa)$ to disturb, cut, discharge, and mix the ground. It is observed that a bulb is formed by using cement paste and environmentally friendly injection materials with minimal alkali leaching. Uniaxial compression tests, test for chemical properties and fish poison test are performed. Test results indicate that the method results in higher durability, less leaching through use of the environmentally friendly injection material, and faster mobilization of the strength. In addition, field tests confirm the formation of the bulb and the seepage cutoff wall.

• The Korean Journal of Pain
• /
• 제19권2호
• /
• pp.175-180
• /
• 2006

Background: A transforaminal epidural steroid injection has been used for the treatment of radicular arm or leg pain, which has the advantage of ventral epidural spreading compared to either an interlaminar or caudal approach. However, several factors are known to affect the epidural spread pattern of contrast dye; therefore, the injected medication can not be delivered to the target site. The objective of our study was to observe any differences in the contrast flow patterns according to several factors. Methods: A total of 34 epidurographies in 29 patients, who underwent fluoroscopically guided transforaminal epidural steroid injections, were evaluated. After confirming the location of the needle tip within the anterior superior aspect of the neural foramen in the lateral view, and at the 6 o'clock position to the pedicle in the anteroposterior view, 2 ml of contrast dye was injected. The contrast flow patterns of ventral, ventral and dorsal, and dorsal epidural filling were analyzed, according to age, gender, magnetic resonance imaging finding and history of previous back surgery. Results: Ventral contrast flow occurred in 30 out of the 34 epidurographies (88%). Both ventral and dorsal contrast flow patterns were observed 13 out of 16 (81%) patients in the older age group. Also, both ventral and dorsal contrast flow patterns were observed in 16 out of 18 (88%) patients with spinal stenosis. Conclusions: Transforaminal epidural steroid injections, performed uner fluoroscopy, provide excellent nerve root filling and ventral epidural spreading. Patients with spinal stenosis or an old age have both ventral and dorsal epidural spreading patterns.

• The Korean Journal of Pain
• /
• 제29권2호
• /
• pp.129-135
• /
• 2016

Although discal cysts are a rare cause of low back pain and radiculopathy. Currently, surgical excision is usually the first-line treatment for discal cysts. However, alternative treatment methods have been suggested, as in some cases symptoms have improved with interventional therapies. A 27-year-old man presented with an acute onset of severe pain, and was found to have a discal cyst after an open discectomy. The patient underwent cyst aspiration and steroid injection through the facet joint under C-arm guidance. After the procedure, the patient's pain improved to NRS 0-1. On outpatient physical examination 1 week, and 1 and 3 months later, no abnormal neurological symptoms were present, and pain did not persist; thus, follow-up observation was terminated. When a discal cyst is diagnosed, it is more appropriate to consider interventional management instead of surgery as a first-line treatment, while planning for surgical resection if the symptoms do not improve or accompanying neurologic deficits progress.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.173-178
• /
• 2007

Time-lapse electrical resistivity measurements have been made in a scale model experiment for geological $CO_2$ sequestration in aquifer. Three types of $CO_2$ injection are tested in a water tank filled with glass beads. These are $CO_2$ dissolved into filtered tap water, $CO_2$ gas, and mineral oil. The mineral oil is a substitute for liquid phase of supercritical $CO_2$. For reconstructing three-dimensional resistivity images, we measure potential differences at 32 potential dipoles on the top surface of the tank due to two current dipoles on the front and back sides. The resultant resistivity images clearly show the movement of injected $CO_2$ in aquifer.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2173-2181
• /
• 2016

Permanent magnet synchronous motors (PMSMs) have higher torque and superior output power per volume than other types of AC motors. They are commonly used for applications that require a large output power and a wide range of speed. For precise control of PMSMs, knowing the accurate position of the rotor is essential, and normally position sensors such as a resolver or an encoder are employed. On the other hand, the position sensors make the driving system expensive and unstable if the attached sensor malfunctions. Therefore, sensorless algorithms are widely researched nowadays, to reduce the cost and cope with sensor failure. This paper proposes a sensorless algorithm that can be applied to a wide range of speed. The proposed method features a robust operation at low-speed as well as high-speed ranges by employing a gain adjustment scheme and intermittent voltage pulse injection method. In the proposed scheme the position estimation gain is tuned by a closed loop manner to have stable operation in tough driving environment. The proposed algorithm is fully verified by various experiments done with a 1 kW outer rotor-type PMSM.

• 유변학
• /
• 제10권2호
• /
• pp.74-81
• /
• 1998

사출성형품의 설계는 그 내부의 기계적 물성 변화보다는 전통적으로 용도에 부합하 는 형상을 위주로 하여 이루어져 왔기 때문에 설계조건의 개선을 통하여 성능이 우수한 제 품을 얻기까지 많은 시행착오가 요구되고 있다. 그런데 사출성형 실험이나 물성평가 시험을 하기 전에 성형품의 부위별 기계적 물성을 알수있다면 제품의 설계나 금형 설계에 많은 도 움이 될 수 있으므로 최근에 물성 예측을 위한 방법론들의 개발이 다양하게 시도되고 있다. 따라서 본 연구에서는 학습시스템, 사출성형 수치모사와 기계적 물성과의 상관관계를 밝히 는 방법을 만들어 사출물이 제작되기 전에 그들의 기계적 물성을 사출성형 수치모사에서 얻 어진 열적·기계적 이력으로부터 예측하고자 하였다. 이때 성형품의 기계적 물성과 열적· 기계적 이력 사이에는 매우 복잡하고 비선형적인 상관관계를 보이기 때문에 이들 사이를 비 매개변수적으로 연관짓기 위하여 역전파 인공신경망 알고리듬을 사용하였으며 열적·기계적 이력은 사출성형용 수치모사 소프트웨어를 이용하여 구하였다. 학습과정에서 전역최소값에 도달하지 못하는 인공신경망의 문제점을 해결하기 위하여 모멘텀변수와 잡음지수를 포함하 는 일련의 항을 첨가하여 연결가중치를 보정하였다. 그 결과 어떤 초기값에 의하여 학습이 되더라도 전역최소값에 도달하는 것을 확인하였으며 이를 이용하여 다른 사출조건에서 사출 물의 기계적 물성을 잘 예측할수 있었다.