• 대한후두음성언어의학회지
• /
• 제32권2호
• /
• pp.94-97
• /
• 2021

Muscle tension dysphonia (MTD) is a voice disorder characterized by excessive tension of the laryngeal muscles during phonation. Voice therapy is the gold standard of treatment for MTD. However, patients with MTD do not always respond to voice therapy. Multidisciplinary approaches have been attempted to treat intractable MTD such as lidocaine instillation, lidocaine injection to recurrent laryngeal nerve, botox injection and excision of false ventricle using CO₂ laser. Recently, injection laryngoplasty is suggested that assists in more efficient phonation and voice therapy to MTD patients. A patient with intractable MTD underwent lidocaine injection and injection laryngoplasty showed improved voice quality and remained stable until postoperative 3 months without any complications.

• 한국분무공학회지
• /
• 제26권2호
• /
• pp.96-103
• /
• 2021

In order to improve the overall efficiency and meet the emission regulations of boiler systems, the heat exchanging methods between inlet air and exhaust gas have been used in boiler systems, named as the waste-heat-recovery condensing boiler. Recently, to further improve the overall efficiency and to reduce the NOx emission simultaneously, the concept of the water injection into the inlet air is introduced. This study suggests the models for the optimized design parameters of water injection for waste-heat-recovery condensing boilers and performs the analysis regarding the water injection amount and droplet sizes for the optimized water injection. At first, the required amount of the water injection was estimated based on the 1^st law of thermodynamics under the assumption of complete evaporation of the injected water. The result showed that the higher the inlet air and exhaust gas temperature into the heat exchanger, the larger the amount of injected water is needed. Then two droplet evaporation models were proposed to analyze the required droplet size of water injection for full evaporation of injected water: one is the evaporation model of droplet in the inlet air and the other is that on the wall of heat exchanger. Based on the results of two models, the maximum allowable droplet sizes of water injection were estimated in various boiler operating conditions with respect to the residence time of the inlet air in the heat exchanger.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 춘계학술발표대회
• /
• pp.53-53
• /
• 2001

Two trials were conducted in a commercial dairy farm on heifer synchronization with PGF$_2$ $\alpha$. Animals showing estrus following the first injection were bred and animals not showing estrus were given the second injection 10 days later. In the first trial, the injection sites were rump and rump. In the second trial, the injection sites were rump and shoulder. Estrous detection was peformed 24 h after injection. Animals were bred by the same technician. In the first trial, the response rate for the first injection was 51.4% and the subsequent pregnancy rate of these animals was 60.0%. The response rate in the second injection was 57.1% and the pregnancy rate was 50.0%. In the second trial, the response rate in the first injection on the rump was 48.7% and the subsequent pregnancy rate was 70.6%. The second injection was given on the shoulder and the response rate was 60.0% and the subsequent pregnancy rate was 25.0%. The data suggests that the site of PGF2 $\alpha$ administration was critical to achieve success in estrous synchronization and pregnancy rates.

• Design & Manufacturing
• /
• 제18권2호
• /
• pp.35-40
• /
• 2024

Injection molding is a process widely used across various industries for molding plastics, and it is the most commonly applied process in root industries utilizing molds. Among the different types of injection molding, insert injection molding, where busbars are used as inserts, is increasingly being applied in the electric vehicle industry. However, currently, the insert injection molding process is manually performed, with workers placing insert components by hand before injection molding. This results in issues related to productivity, safety, and quality. Additionally, there is a growing demand for automation of such production lines due to hazardous working conditions, economic difficulties in the manufacturing industry, and the decline in the labor force caused by an aging population. This study focuses on the application of an automated system for the insert injection molding process used in electric vehicles. The development of an automated system for the transport and insertion of insert components, as well as the inspection and stacking processes after injection, has resulted in over a 25% improvement in productivity and more than a 27% reduction in defect rates.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.1-23
• /
• 2017

A coupled liquid-gas-solid three-phase model, linking two numerical codes (TOUGH2/EOS3 and $FLAC^{3D}$), was firstly established and validated by simulating an in-situ air flow test in Essen. Then the coupled model was employed to investigate responses of multiphase flow and soil skeleton deformation to compressed air or freshwater injection using the same simulation conditions in an aquifer of Tianjin, China. The simulation results show that with injecting pressurized fluids, the vertical effective stress in some area decreases owing to the pore pressure increasing, an expansion of soil skeleton appears, and land uplift occurs due to support actions from lower deformed soils. After fluids injection stops, soil deformation decreases overall due to injecting fluids dissipating. With the same applied pressure, changes in multiphase flow and geo-mechanical deformation caused by compressed air injection are relatively greater than those by freshwater injection. Furthermore, the expansion of soil skeleton induced by compressed air injection transfers upward and laterally continuously with time, while during and after freshwater injection, this expansion reaches rapidly a quasi-steady state. These differences induced by two fluids injection are mainly because air could spread upward and laterally easily for its lower density and phase state transition appears for compressed air injection.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.297-305
• /
• 2017

Air-source heat pumps are widely used in residential heating systems. However, the decrease in the capacity of the heat pump is unavoidable when operating at very low and high ambient temperatures. The vapor injection technique is considered a promising technology to overcome this problem. Recent research on vapor injection cycles have mainly adopted a scroll compressor with an internal heat exchanger at severe operating conditions. This study measured the COP and EER of a gas injection heat pump using a flash tank with an inverter-driven rotary compressor at severe operating conditions. Compared to non-injection heat pumps, the heating capacity and COP of the gas injection heat pump improved up to 15% and 2.9%, respectively, at outdoor temperatures of $-10^{\circ}C$ to $7^{\circ}C$. The cooling capacity of the gas injection heat pump was 11% higher than the non-injection heat pump at an outdoor temperature of $35^{\circ}C$. At the same time, the EER of the gas injection heat pump was similar to that of the non-injection heat pump.

• The Korean Journal of Pain
• /
• 제28권2호
• /
• pp.122-128
• /
• 2015

Background: Caudal epidural injections have been commonly performed in patients with low back pain and radiculopathy. Although caudal injection has generally been accepted as a safe procedure, serious complications such as inadvertent intravascular injection and dural puncture can occur. The present prospective study was designed to investigate the influence of the depth of the inserted needle on the success rate of caudal epidural blocks. Methods: A total of 49 adults scheduled to receive caudal epidural injections were randomly divided into 2 groups: Group 1 to receive the caudal injection through a conventional method, i.e., caudal injection after advancement of the needle 1 cm into the sacral canal (n = 25), and Group 2 to receive the injection through a new method, i.e., injection right after penetrating the sacrococcygeal ligament (n = 24). Ultrasound was used to identify the sacral hiatus and to achieve accurate needle placement according to the allocated groups. Contrast dyed fluoroscopy was obtained to evaluate the epidural spread of injected materials and to monitor the possible complications. Results: The success rates of the caudal injections were 68.0% in Group 1 and 95.8% in Group 2 (P = 0.023). The incidences of intravascular injections were 24.0% in Group 1 and 0% in Group 2 (P = 0.022). No intrathecal injection was found in either of the two groups. Conclusions: The new caudal epidural injection technique tested in this study is a reliable alternative, with a higher success rate and lower risk of accidental intravascular injection than the conventional technique.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1037-1044
• /
• 2019

본 논문에서는 다중 주파수 발생기의 설계를 위한 단일 인젝션 락킹 현상에 대한 연구를 진행한다. 다중 주파수 발생기 설계를 위하여 인젝션 락킹 현상에 대한 기본적인 이론을 서술하고 이를 토대로 단일 인젝션 락킹 실험에 대하여 서술한다. 실험은 인젝션 신호에 비해 불안정하게 진동하는 발진기에 일정하게 진동하는 안정된 신호인 인젝션 신호를 인가하는 방식으로 진행하였다. 인젝션 신호는 홀렌드 전류원을 사용하고 콜피츠 발진기를 사용하여 회로를 구성하였다. 실험결과 각각의 인젝션 신호(840kHz, 500kHz)를 주입하였을 때 각각의 발진기가 안정하게 진동하는 것을 확인하였다. 위의 단일 인젝션 락킹 실험결과를 통하여 다중 주파수 발생기 설계에 인젝션 락킹 현상을 응용 할 수 있음을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권3호
• /
• pp.42-49
• /
• 2017

TOUGH2 was used to simulate the migration of $CO_2$ injected into a sandy aquifer. A series of numerical simulations was performed to investigate the effects of a low-permeability layer (LPL) embedded in the aquifer on the injection rate and the pressure distribution of $CO_2$. The results show that the size and location of the LPL greatly affected the spread of $CO_2$. The pressure difference between two points in the aquifer, one each below and above the LPL, increased as the size of the LPL increased, showing a critical value at 200 m, above which the size effect was diminished. The location of the LPL with respect to the injection well also affected the migration of $CO_2$. When the injection well was at the center of the LPL, the injection rate of $CO_2$ decreased by 5.0% compared to the case with no LPL. However, when the injection well was at the edge of the LPL, the injection rate was decreased by only 1.6%. The vertical distance between the injection point and the LPL also affected the injection rate. The closer the LPL was to the injection point, the lower the injection rate was, by up to 8.3%. Conclusively, in planning geologic storage of $CO_2$, the optimal location of the injection well should be determined considering the distribution of the LPL in the aquifer.

• Archives of Plastic Surgery
• /
• 제33권6호
• /
• pp.742-747
• /
• 2006

Purpose: The purpose of this study was to evaluate the role of mast cell and histamine as typical product of mast cell in ischemia-reperfusion injury of muscle flap using H2 receptor blocker and mast cell stabilizer. Methods: Thirty-five Sprague-Dawley rats weighing 250-300 gm were divided into four groups; Group I: Control group without ischemia, Group II: Normal saline injection group with ischemia, Group III: Cimetidine injection group with ischemia, Group IV: Sodium cromoglycate injection group with ischemia. Well established single pedicled transverse rectus abdominis musculocutaneous(TRAM) flap was designed in all rats and were rendered ischemia by clamping the artery for 150 minutes. All injections were applied intramuscular around gluteal area 30 minutes before reperfusion. The flap survival was evaluated at 7 days after operation. Neutrophil counts and mast cell counts were evaluated 24 hours after reperfusion. Results: The difference of skin flap survival between control group and cimetidine injection group was not significant. In the normal saline injection group flap survival was markedly decreased compared to that of control group. The muscle flap survival was similar to the results of skin flap survival. The neutrophil counts were significantly decreased in control group and sodium cromoglycate injection group than normal saline injection group. The mast cell counts were significantly decreased in cimetidine injection group and control group than both normal saline injection and sodium cromoglycate injection groups. The protective effect of sodium cromoglycate was not seen in the skin flap, but the muscle flaps showed protective effects of sodium cromoglycate compared to normal saline injection group. Conclusions: It is suggests that commonly used antihistamine(H2 receptor blocker) has protective effect against ischemia-reperfusion injury to skin and muscle flaps by reducing neutrophil and mast cell. The mast cell stabilizer was not effective for skin flap but, possibly, for muscle flap.