• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.217-222
• /
• 1994

This paper describes the determination of optimal initial billet size for axisymmetric cold forging products using neural networks. The determination of optimal initial billet size is very important in forging design and forming sequence design, because the result of such designs and forming load can be different by variable initial billet sizes. The forming difficulty has been defined as the degree of difficulty in forming by 3 process ' forward extrusion, backward extrusion and upsetting. By neural networks a forming difficulty can be determined with the ratio of shape and forming process. From the graph of maximum, minimum, and average forming difficulties by variable billet sizes, the optimal billet size can be determined. The initial billets of a solid part and a hollow part whichwas determined by this study are compared with the sequence drawing generated by the one of forming sequence design system.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.394-400
• /
• 2010

This study examined the effects of particle size on characteristics of cement by controlling the particle size of commercial cement. Through a size adjustment, the cement has increasing more of particles that are less than $10{\mu}m$ in size so the initial reaction time has been shortened as a result of improvement in the early hydration reaction. Additionally, it showed a great characteristics of strength from the early age and the initial hydration heat has been increased as well. In the upper and middle parts cements, the initial hydration reaction rate contribution is high with the $10{\mu}m$ compared to original cement. So the initial hydration reaction rate is improved and as a result, it also showed relatively high hydration heat as well. Additionally, adiabatic temperature also showed an increase rate in the results.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.29-36
• /
• 1987

초기균열을 갖는 대부분의 구초체는 부재크기가 증가함에 따라 강도가 저하한다. 이러한 현상을 크기효과(size effect)라고 한다. 유리, 금속, 콘크리트 동, 구조재료중에서 콘크리트는 비록 초기균열이 없더라도 이 size effect 현상을 보인다. 현존의 크기효과 법칙에 따르면 매우 큰 콘크리트 구조체는 거의 하중을 저하할 수 없다. 그러나 실제로는 초기 균열이 없는 경우 상당한 크기의 응력을 저항할 수 있다. 이러한 현상은 매우 큰 구조체와 작은 구조체는 강도기준의 적용이 합당하고, 그 중간 크기의 구조체는 비선형파괴역학의 적용이 합당함을 말한다. 이 논문에서는 비선형파괴역학에 근거하여 유도된 실험식에, 기존의 실험치를 이용하여 비선형회귀분석올 행하여 실험상수를 정함으로써 일축압축, 할열(splitting)인장 및 전단강도에 대한 실험식을 제시한다.

• 한국공간구조학회논문집
• /
• 제10권4호
• /
• pp.59-66
• /
• 2010

본 연구는 스페이스 트러스 구조물의 초기 형상을 결정하기 위해 밀도법을 이용한 위상최적화 기술을 고려하고자 한다. 대부분의 초기 형상설계는 다양한 최적화 방법을 활용하지 않고 설계자의 경험이나 시행착오적인 방법을 바탕으로 수행되고 있다. 이런 이유로 합리적이고 경제적인 최적화기술이 초기 형상설계에 도입되어야 한다. 따라서 본 연구에서는 스페이스 트러스 구조물을 대상으로 설계영역을 설정하고 위상최적화를 수행하여 최적의 재료분포를 찾은 뒤 크기최적화를 이용하여 최적부재 크기를 찾고자 한다. 이와 같이 밀도법을 이용한 위상 및 크기최적화를 병행하여 수행할 경우 합리적인 스페이스 트러스 구조물의 초기 형상을 도출할 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.838-846
• /
• 2004

Minimum ignition energies of hydrogen/air and methane/air mixtures have been investigated numerically by solving unsteady one-dimensional conservation equations with detailed chemical kinetic mechanisms. Initial kernel size needed for numerical calculation is a sensitive function of initial pressure of a mixture and should be estimated properly to obtain quantitative agreement with experimental results. A simple macroscopic model to determine minimum ignition energy has been proposed, where the initial kernel size is correlated with the quenching distance of a mixture and evaluated from the quenching distance determined from experiment. The simulation predicts minimum ignition energies of two sample mixtures successfully which are in a good agreement with the experimental data for the ranges of pressure and equivalence ratio.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.37-43
• /
• 2019

This paper studies application of modified couple stress theory and first order shear deformation theory to magneto-electro-mechanical vibration analysis of three-layered size-dependent curved beam. The curved beam is resting on Pasternak's foundation and is subjected to mechanical, magnetic and electrical loads. Size dependency is accounted by employing a small scale parameter based on modified couple stress theory. The magneto-electro-mechanical preloads are accounted in governing equations to obtain natural frequencies in terms of initial magneto-electro-mechanical loads. The analytical approach is applied to investigate the effect of some important parameters such as opening angle, initial electric and magnetic potentials, small scale parameter, and some geometric dimensionless parameters and direct and shear parameters of elastic foundation on the magneto-electro-elastic vibration responses.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.445-446
• /
• 2010

Gen-2 Q-알고리즘에서는 질의 라운드 동안 사용할 슬롯-카운트 매개변수인 $Q_{fp}$에 대한 초기 값이 정의되어 있지 않다. 이 경우, 만일 초기 $Q_{fp}$ 값이 아주 큰 경우에는 초기 질의 라운드 동안 빈 슬롯이 많이 발생할 수 있고, 반면 초기 $Q_{fp}$ 값이 아주 적은 경우에는 충돌이 많이 발생할 수 있다. 이로 인하여 질의 라운드 동안 최적의 프레임 크기에 수렴하는 속도가 늦어질 수 있으므로 식별 속도 및 효율이 저하되는 문제점이 발생할 것으로 예상된다. 따라서 본 논문에서는 초기 슬롯 카운트의 값이 Gen-2 Q-알고리즘의 성능에 미치는 영향을 분석한다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권1호
• /
• pp.21-25
• /
• 2002

To maximize and sustain the productivity of Monascus pigments, various environmental and nutritional parameters, such as the initial moisture content, pH, inoculum size, sample size, and nutrient supplement, that influence pigment production were evaluated in solid-state cultures as follows: initial moisture content, $50\%;$ pH, 6.0; inoculum size $1\;\times\;10^4$ spore cells $(grams\;of\;dry\;solid\;substrate)^{-1};$ sample size, 300 g. All supplementary nutrients (carbon, nitrogen, and mineral sources) added has inhibitory effects on the cell growth and red pigment production. In open tray culture the maximum biomass yield and specific productivity of red pigments were 223 mg DCW $(grams\;of\;initial\;dry\;substrate)^{-1}$ and, $47.6\;OD_{500}\;(DCW\;grams)^{-1}h^h{-1}$ respectively.

• Archives of Pharmacal Research
• /
• 제9권2호
• /
• pp.87-91
• /
• 1986

In attempt to develop a drug delivery system using serum albumin microspheres, bovine serum albumin microspheres containing antitumar agent. Cytarabine, were prepared. The shape, surface characteristics, size distribution, behavior of in vivo distribution, drug release behavior, and degradation of albumin microsphers in animal liver issue homogenate and proteolytic enzyme were investigated. The shape of albumin microspheres was spherical and the surface was smooth and compact. The size distribution of the albumin microspheres was effected by dispertion forces during emulsification and albumin concentration. Distribution of albumin microspheres after imtravenous administration in rabbit was achieved immediately. In vitro, albumin microsphere matrix was so hard that it retained most of cytarabine except initial burst during the first 10 minutes, and the level of drug release during the initial burst was affected by heating temperature, drug/albumin microsphere matrix was so hard that it retained most of cytarabine except initial burst during the first 10 minutes, and the level of drug release during the initial burst was affected by heating temperature, drug/albumin concentration ratio and size distribution. After drug release test, the morphology of albumin microspheres was not changed. Albumin microsphere matrix was degraded by the animal liver issue homogenate and proteolytic enzyme. The degree of degradation was affected by heating temperature.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권6호
• /
• pp.260-265
• /
• 2014

Objectives: The aim of this study was to verify the clinical effectiveness of decompression in decreasing the size of a cyst. In addition to the different types of cysts, we tried to reveal what effect host factors, such as the initial size of the lesion and the age of the patient, have on the velocity of cyst shrinkage. Materials and Methods: With the aid of a panoramic view, we measured the size of the cysts before and after decompression in 13 dentigerous cysts (DCs), 14 keratocystic odontogenic tumors (KTOCs), and 5 unicystic ameloblastoma (UA) cases. The velocity of shrinkage in the three cystic groups was calculated. Relationships between the age of the patient, the initial size of the cyst, and the shrinkage velocity were investigated. Results: The three types of cysts showed no inter-type differences in their velocity of shrinkage. However, there was a statistically meaningful relationship between the initial size of the lesion and the absolute velocity of shrinkage in the DC group (P=0.02, R=0.65) and the KTOC group (P=0.02, R=0.56). There was also a significant relationship between the age of the patient and the absolute velocity of shrinkage in the KTOC group (P=0.04, R=0.45) and the UA group (P=0.04, R=0.46). Conclusion: There was no difference in the decrease in size due to decompression among the different types of cysts. However, the age of the patient and the initial size of the lesion showed a significant relationship with the velocity of shrinkage.