• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.660-667
• /
• 2006

This paper presents a novel region-based snake method for vessel segmentation. According to geometric shape analysis of the vessel structure with different scale, an efficient statistical estimation of vessel branches is introduced into the energy objective function, which applies not only the vessel intensity information, but also geometric information of line-like structure in the image. The defined energy function is minimized using the gradient descent method and a new region-based speed function is obtained, which is more accurate to the vessel structure and not sensitive to the initial condition. The narrow band algorithm in the level set framework implements the proposed method, the solution of which is steady. The segmentation experiments are shown on several images. Compared with other geometric active contour models, the proposed method is more efficient and robust.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1903-1910
• /
• 2012

This paper presents a data based low-order controller design algorithm for a linear time-invariant process with a time delay. The algorithm is composed by combining an identification step based on open loop pulse test with a low-order controller design step to obtain the entire set of controllers achieving multiple performance specifications. The initial information necessary for this algorithm are merely the width and amplitude of a rectangular pulse, a controller of four types (PI, PD, PID, first-order), and design objectives. Various parametric approaches that have been developed are merged in the controller design algorithm. The resulting controller set satisfying the design objectives are displayed on the 2D and 3D graphics and thus it is very easy for us to pick a controller inside the admissible set because we can check the corresponding closed-loop performances visually.

• Steel and Composite Structures
• /
• v.21 no.6
• /
• pp.1389-1410
• /
• 2016

This paper proposes a hybrid of topological derivative-based level set method (LSM) and isogeometric analysis (IGA) for structural topology optimization. In topology optimization a significant drawback of the conventional LSM is that it cannot create new holes in the design domain. In this study, the topological derivative approach is used to create new holes in appropriate places of the design domain, and alleviate the strong dependency of the optimal topology on the initial design. Furthermore, the values of the gradient vector in Hamilton-Jacobi equation in the conventional LSM are replaced with a Delta function. In the topology optimization procedure IGA based on Non-Uniform Rational B-Spline (NURBS) functions is utilized to overcome the drawbacks in the conventional finite element method (FEM) based topology optimization approaches. Several numerical examples are provided to confirm the computational efficiency and robustness of the proposed method in comparison with derivative-based LSM and FEM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.307-307
• /
• 2012

In this study, we investigated that the resistance switching characteristics of Al-doped MgOx films with increasing Al doping concentration and increasing film thickness. The Al-doped MgOx based ReRAM devices with a TiN/Al-doped MgOx/Pt/Ti/SiO2 were fabricated on Si substrates. The 5 nm, 10 nm, and 15 nm thick Al-doped MgOx films were deposited by reactive dc magnetron co-sputtering at $300^{\circ}C$ and oxygen partial ratio of 60% (Ar: 16 sccm, O2: 24 sccm). Micro-structure of Al-doped MgOx films and atomic concentration were investigated by XRD and XPS, respectively. The Al-doped MgOx films showed set/reset resistance switching behavior at various Al doping concentrations. The process voltage of forming/set is decreased and whereas the initial current level is increased with decreasing thickness of Al-doped MgOx films. Besides, the initial current of Al-doped MgOx films is increased with increasing Al doping concentration in MgOx films. The change of resistance switching behavior depending on doping concentration was discussed in terms of concentration of non-lattice oxygen of Al-doped MgOx.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.146-153
• /
• 2005

In this paper, a multi-step optimization using genetic algorithm with variable penalty function is introduced to the structural design optimization of a grinding machine. The design problem, in this study, is to find out the optimum configuration and dimensions of structural members which minimize the static compliance, the dynamic compliance, and the weight of the machine structure simultaneously under several design constraints such as dimensional constraints, maximum deflection limit, safety criterion, and maximum vibration amplitude limit. The first step is shape optimization, in which the best structural configuration is found by getting rid of structural members that have no contributions to the design objectives from the given initial design configuration. The second and third steps are sizing optimization. The second design step gives a set of good design solutions having higher fitness for lightweight and minimum static compliance. Finally the best solution, which has minimum dynamic compliance and weight, is extracted from the good solution set. The proposed design optimization method was successfully applied to the structural design optimization of a grinding machine. After optimization, both static and dynamic compliances are reduced more than 58.4% compared with the initial design, which was designed empirically by experienced engineers. Moreover the weight of the optimized structure are also slightly reduced than before.

• Earthquakes and Structures
• /
• v.12 no.5
• /
• pp.543-557
• /
• 2017

Results of an extensive study aiming to properly extend the well known pushover analysis into 3-D problems of asymmetric buildings are presented in this paper. The proposed procedure uses simple, 3 DOF, one-story models with shear-beam type elements in order to quantify the effects of inelastic torsional response of such buildings. Correction coefficients for the response quantities at the "stiff" and "flexible" sides are calculated using results from non-linear time history analyses of the simple models. Their values are then applied to the results of a simple, plane pushover analysis of the detailed building models. Results from the application of the new method for a set of three, conventionally designed, five-story buildings with high values of uniaxial eccentricities are compared with those obtained from multiple non-linear dynamic time history analyses, as well as from similar pushover methods addressing the same problem. This initial evaluation indicates that the proposed procedure is a clear improvement over the simple (conventional) pushover method and, in most cases, more accurate and reliable than the other methods considered. The accuracy, however, of all these methods is reduced substantially when they are applied to torsionally flexible buildings. Thus, for such challenging problems, use of inelastic dynamic analyses for a set of two component earthquake motions appears to be the preferable solution.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.67-75
• /
• 2013

The present duration of 5 years in the Korea Green Building Certification(G-SEED) should be re-set taking into account with the needs for renewal of re-certification criteria. This study methods is to analyze the differences between the characteristics of the certification system of green building of domestic and foreign and to seek the improvement to derive the problem of detailed evaluation items of the examination. The purpose of this study is to identify some problems of re-certification criteria in the G-SEED System and to propose the renewal of certification system. Analysis of the rating criteria with a few re-certified examples of office buildings have been made. Some measures to improve the re-certification have been suggested as follows; (1) it is strongly suggested to establish re-certification rating systems that is not yet made, (2) the new criteria of re-certification bring into focus on whether buildings maintain the environmental performances of the initial status certified, and (3) thus the effective duration of re-certification needs to re-set flexibly in a way to confirm to the initial environmental performances and maintenance conditions certified.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.58-64
• /
• 2007

The clamping force of a jaw pad is determined by the displacements of main part when two lockers are locked, after the clamping angle of a locker was set up in the wedge type rail clamp for a container crane. In this time, if the resistance of wedge frame generates due to several factors, the clamping angle of a locker to display the initial clamping force will be changed because of the reduction of displacement of extension bar. This resistance is determined by the eccentric distance between the roller and the wedge, and by the gap between the wedge frame and outer frame. In this study we measured the tensile force of both extension bar through the performance test of the prototype rail clamp in order to evaluate the effect of the resistance of wedge frame on the clamping force of the wedge type rail clamp.

• Biomolecules & Therapeutics
• /
• v.26 no.3
• /
• pp.290-297
• /
• 2018

We aimed to understand the molecular changes in host cells that accompany infection by the seasonal influenza A H1N1 virus because the initial response rapidly changes owing to the fact that the virus has a robust initial propagation phase. Human epithelial alveolar A549 cells were infected and total RNA was extracted at 30 min, 1 h, 2 h, 4 h, 8 h, 24 h, and 48 h post infection (h.p.i.). The differentially expressed host genes were clustered into two distinct sets of genes as the infection progressed over time. The patterns of expression were significantly different at the early stages of infection. One of the responses showed roles similar to those associated with the enrichment gene sets to known 'gp120 pathway in HIV.' This gene set contains genes known to play roles in preventing the progress of apoptosis, which infected cells undergo as a response to viral infection. The other gene set showed enrichment of 'Drug Metabolism Enzymes (DMEs).' The identification of two distinct gene sets indicates that the virus regulates the cell's mechanisms to create a favorable environment for its stable replication and protection of gene metabolites within 8 h.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.677-682
• /
• 2007

Concurrent competition for finite resources by multiple parts in flexible manufacturing systems(FMS's) and inappropriate initial marking or net structure of Petri net with share resources results in deadlock. This is an important issue to be addressed in the operation of the systems. Deadlock is a system state so that some working processes can never be finished. Deadlock situation is due to a wrong resource allocation policy. In fact, behind a deadlock problem there is a circular wait situation for a set of resources. Deadlock can disable an entire system and make automated operation impossible. Particularly, an unmanned system cannot recover from such a status and a set of jobs waits indefinitely for never-to-be-released resources. In this paper, we proposed a deadlock prevention method using siphon and trap of Petri net. It is based on potential deadlock which are siphon that eventually became empty. This method prevents the deadlock by the control of transition fire and initial marking in the Petri net. An given example of FMS is shown to illustrate our results with deadlock-free.