• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.185-185
• /
• 2011

Mapping of artificial levee lines, one of major tasks in river zone mapping, is critical to prevention of river flood, protection of environments and eco systems in river zones. Thus, mapping of artificial levee lines is essential for management and development of river zones. Coastal mapping including river zone mapping has been historically carried out using surveying technologies. Photogrammetry, one of the surveying technologies, is recently used technology for national river zone mapping in Korea. Airborne laser scanning has been used in most advanced countries for coastal mapping due to its ability to penetrate shallow water and its high vertical accuracy. Due to these advantages, use of LiDAR data in coastal mapping is efficient for monitoring and predicting significant topographic change in river zones. This paper introduces a method for construction of a 3D artificial levee line using a set of LiDAR points that uses normal vectors. Multiple steps are involved in this method. First, a 2.5-dimensional Delaunay triangle mesh is generated based on three nearest-neighbor points in the LiDAR data. Second, a median filtering is applied to minimize noise. Third, edge selection algorithms are applied to extract break edges from a Delaunay triangle mesh using two normal vectors. In this research, two methods for edge selection algorithms using hypothesis testing are used to extract break edges. Fourth, intersection edges which are extracted using both methods at the same range are selected as the intersection edge group. Fifth, among intersection edge group, some linear feature edges which are not suitable to compose a levee line are removed as much as possible considering vertical distance, slope and connectivity of an edge. Sixth, with all line segments which are suitable to constitute a levee line, one river levee line segment is connected to another river levee line segment with the end points of both river levee line segments located nearest horizontally and vertically to each other. After linkage of all the river levee line segments, the initial river levee line is generated. Since the initial river levee line consists of the LiDAR points, the pattern of the initial river levee line is being zigzag along the river levee. Thus, for the last step, a algorithm for smoothing the initial river levee line is applied to fit the initial river levee line into the reference line, and the final 3D river levee line is constructed. After the algorithm is completed, the proposed algorithm is applied to construct the 3D river levee line in Zng-San levee nearby Ham-Ahn Bo in Nak-Dong river. Statistical results show that the constructed river levee line generated using a proposed method has high accuracy in comparison to the ground truth. This paper shows that use of LiDAR data for construction of the 3D river levee line for river zone mapping is useful and efficient; and, as a result, it can be replaced with ground surveying method for construction of the 3D river levee line.

• Korean Journal of Radiology
• /
• v.24 no.4
• /
• pp.305-312
• /
• 2023

Objective: Chronic enteropathy associated with SLCO2A1 gene (CEAS) is a recently recognized disease. We aimed to evaluate the enterographic findings of CEAS. Materials and Methods: Altogether, 14 patients with CEAS were confirmed based on known SLCO2A1 mutations. They were registered in a multicenter Korean registry between July 2018 and July 2021. Nine of the patients (37.2 ± 13 years; all female) who underwent surgery-naïve-state computed tomography enterography (CTE) or magnetic resonance enterography (MRE) were identified. Two experienced radiologists reviewed 25 and 2 sets of CTE and MRE examinations, respectively, regarding the small bowel findings. Results: In initial evaluation, eight patients showed a total of 37 areas with mural abnormalities in the ileum on CTE, including 1-4 segments in six and > 10 segments in two patients. One patient showed unremarkable CTE. The involved segments were 10-85 mm (median, 20 mm) in length, 3-14 mm (median, 7 mm) in mural thickness, circumferential in 86.5% (32/37), and showed stratified enhancement in the enteric and portal phases in 91.9% (34/37) and 81.8% (9/11), respectively. Perienteric infiltration and prominent vasa recta were noted in 2.7% (1/37) and 13.5% (5/37), respectively. Bowel strictures were identified in six patients (66.7%), with a maximum upstream diameter of 31-48 mm. Two patients underwent surgery for strictures immediately after the initial enterography. Follow-up CTE and MRE in the remaining patients showed minimal-to-mild changes in the extent and thickness of the mural involvement for 17-138 months (median, 47.5 months) after initial enterography. Two patients required surgery for bowel stricture at 19 and 38 months of follow-up, respectively. Conclusion: CEAS of the small bowel typically manifested on enterography in varying numbers and lengths of abnormal ileal segments that showed circumferential mural thickening with layered enhancement without perienteric abnormalities. The lesions caused bowel strictures that required surgery in some patients.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.1
• /
• pp.46-54
• /
• 1995

Postoperative infection following orthognatic surgery is rare. When postoperative infections occur, the initial treatment consists of incision and drainage of the affected area, culturing to identify bacterial stains and verify antibiotic sensitivity, and the institution of the appropriate antibiotic regimen. Some plates and screws may eventually require removal, the initial therapy should be attempted to retain the plates and screws until adequete healing has taken place. In orthoganthic surgery, intra-operative complications as a lesion of inferior alveolar nerve, fracture of osteomised segments, incomplete sectioning, malposition of segments, haemorrhage may occur. The surgeon should be familiar with possible complications to be caused and how to manage them. Prevention of postoperative infection following the orthognathic surgery consists of minimal periosteal reflection, aseptic management of operation field, proper surgical technique, rigid fixation, prophylactic antibiotics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12C
• /
• pp.1147-1153
• /
• 2009

We propose a novel image segmentation and segment-based stereo matching technique using color, depth, and motion information. Proposed technique firstly splits reference images into foreground region or background region using depth information from depth camera. Then each region is segmented into small segments with color information. Moreover, extracted segments in current frame are tracked in the next frame in order to maintain depth consistency between frames. The initial depth from the depth camera is also used to set the depth search range for stereo matching. Proposed segment-based stereo matching technique was compared with conventional one without foreground and background separation and other conventional one without motion tracking of segments. Simulation results showed that the improvement of segment extraction and depth estimation consistencies by proposed technique compared to conventional ones especially at the static background region.

• Korean Journal of Environmental Biology
• /
• v.23 no.2 s.58
• /
• pp.135-140
• /
• 2005

In order to construct an artificial cultivation of Nostoc flagelliforme on solid medium, we attempted to assess the viability of approaches, which utilized either BG-11 agar or sand medium using both sterile and non-sterile algal segments. In the trial in which the BG -11 agar medium was inoculated with the non-sterile algal segments, the algae exhibited the rapid growth in the initial 4 days of cultivation. However, after 4 days of cultivation, the growth rate of the algae slowed, and the algal growth was completely stopped by 7 days of cultivation. When the BG -11 medium was inoculated with the sterile algal segments, the algae exhibited the rapid growth for a longer period of 8 days, reaching a length of 24.9 mm. The growth rate during this period was measured to be $24.5\%$. After the 8 days of cultivation, the algal growth rate began to slow and had almost stopped by the 13 days of cultivation. On the other hand, when the sterile algal segments were inoculated onto a sand plate, the algal segments decomposed, reaching total decomposition after 11 days of cultivation. By way of contrast, the desiccation treatment samples continued to grow for 14 days of cultivation. After 14 days of cultivation, the algae achieved a length of 26.1 mm, with a growth rate of $30.6\%$. Our results indicate that periodic desiccation may constitute an effective strategy for the prevention of algal decomposition.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.3
• /
• pp.211-218
• /
• 1994

This experiment was conducted to obtain basic information for the establishment of in vitro initial culture system in Fritillaria thuubergii Miq. Methods of surface sterilization of scale segments as explant and effect of antibiotics added into the culture medium on contamination of explant and chilling treatment of mother bulb on bulblet formation were investigated. Portent of contamination of cultured scale segments was significantly higher in the outer scale segments which were unsuitable as initial culture explant than inner scale segments. Contamination of explants taken from inner scale of bulb was reduced by surface sterilizing explants in the solution of $4{\sim}5%$ sodium hypoclorite for $10{\sim}15$ mimutes. Addition of antibiotics such as kanamycin, vancomycia cefotaxim, agrirnycin and agreptomycin and dithane as fungicide and$lncyte^{tm}$ into MS medium was effective to reduce bateriological contamination, but did not work to control fungi. It had effective to delay the degree of contamination caused by fungi and bacteria haboring in cultured explants. Bulblet formation from cultured scale segments was promoted by dry storage for $2{\sim}4$ weeks or moisture storage of mother bulbs for $4{\sim}6$ weeks at $10^{\circ}C$ before excision of explants. Addition of kinetin into medium could not exerted for the bulblet formation from the scale segment of dry storaged bulb compared to control. But explant taken from 6 week moisture storaged bulb formed more than 10 bulblets per explant on the medium containing $3{\sim}5mg/L$ kinetin.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.241-244
• /
• 2005

Many building detection methods mainly rely on line segments extracted from aerial or satellite imagery. Building detection methods based on line segments, however, are difficult to succeed in high resolution satellite imagery such as IKONOS imagery, for most buildings in IKONOS imagery have small size of roofs with low contrast between roof and background. In this paper, we propose an efficient method to extract line segments and group them at the same time. First, edge preserving filtering is applied to the imagery to remove the noise. Second, we segment the imagery by watershed method, which collects the pixels with similar intensities to obtain homogeneous region. The boundaries of homogeneous region are not completely coincident with roof boundaries due to low contrast in the vicinity of the roof boundaries. Finally, to resolve this problem, we set up snake model with segmented region boundaries as initial snake's positions. We used a greedy algorithm to fit a snake to roof boundary. Experimental results show our method can obtain more .correct roof boundary with small size and low contrast from IKONOS imagery. Snake algorithm, building roof detection, watershed segmentation, edge-preserving filtering

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.113-118
• /
• 2004

Somatic embryos were formed from calli obtained from axillary shoots (raised from nodal segments of glasshouse-grown plants under aseptic conditions), internodal segments (from in vitro-raised plants), and root and coty-ledonary leaf segments (from in vitro-raised seedlings) after 8 weeks of initial culture. Embryo formation was the highest (97.33%) from cotyledonary leaf callus on Mura-shige and Skoog's (MS) medium containing kinetin (KN) (3 mg/L). Somatic embryo induction was lesser with different combinations of auxins while it increased to 100% in internodal segment and cotyledonary leaf calli with 6-benzyladenine (BA) (2mg/L) along with 2,3,5-triiodobenzoic acid (TIBA) (2mg/L). The shoots were induced from somatic embryos raised from root, coty-ledonary leaf and internodal segment calli grown on MS medium containing BA in combination with indole-3-acetic acid (IAA). Maximum of 66.67% cultures formed shoots on MS medium containing BA (1mg/L) in combination with IAA (2mg/L). The shoots raised from somatic embryos were rooted on MS medium supplemented with indole-3-butyric acid (IBA) (2mg/L). The plantlets transferred to the field showed 70% survival rate after one year.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.2
• /
• pp.49-55
• /
• 2013

Water lubricated guide bearing was newly released and has been applied to actual hydro turbines with vertical shaft. As a result, they can have not only high bearing performance but environmental advantages in meeting the demand for reducing river pollution by oil leakage from oil lubricated guide bearing. The PTFE composite guide bearing was tested by experimental equipment operated under conditions similar to those of actual hydro turbines. Circumferential and axial tilting bearing segments help to improve the bearing performance and efficiency due to low friction loss in the bearing system. Furthermore, bearing cooling systems could be eliminated and maintenance periods could be extended, thus the initial investment and operating costs of the hydroelectric power plant are reduced.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.791-797
• /
• 2007

This paper proposes a semiautomatic vertebra segmentation method that overcomes limitations of both manual segmentation requiring tedious user interactions and fully automatic segmentation that is sensitive to initial conditions. The proposed method extracts fence surfaces between vertebrae, and segments a vertebra using fence-limited region growing. A fence surface is generated by a deformable model utilizing valley information in a valley emphasized Gaussian image. Fence-limited region growing segments a vertebra using gray value homogeneity and fence surfaces acting as barriers. The proposed method has been applied to ten patient data sets, and produced promising results accurately and efficiently with minimal user interaction.