• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.203-207
• /
• 2019

Calcium phosphates such as hydroxyapatite (HAp), tricalcium phosphate (${\beta}$-TCP), and biphasic calcium phosphate (BCP, HAp/${\beta}$-TCP) have been prepared via hydrothermal treatment. The synthesis was conducted by reacting ($Ca(OH)_2$) aqueous solution with phosphoric acid ($H_3PO_4$) under different hydrothermal synthesis conditions (temperatures up to $150^{\circ}C$ and pH lower than 12). The effects of initial precursor Ca/P ratio (1.30, 1.50 and 1.67) and post heat treatment on the phase evolution behavior of the powders and sintered ceramics were investigated. The phases of resulting powders and sintered ceramics were controllable by adjusting the initial Ca/P ratio. A single HAp phase without any noticeable second phase was obtained for the initial Ca/P ratio of 1.67 in the overall heat treatment range. Pure ${\beta}$-TCP and biphasic calcium phosphate (HAp/${\beta}$-TCP) were synthesized from precursor solutions having Ca/P molar ratios of 1.30 and 1.50, respectively, after having been heat treated at $900^{\circ}C$ or higher. Dense ceramics with translucency were obtained at considerably lower sintering temperatures.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.503-510
• /
• 1999

The purpose of this study is to investigate the negative effects of cervical pull headgear and to compare the differences between the two groups of growers-vertical grower and horizontal grower group-which are classified by the posterior-anterior facial height ratio. Initial and final lateral cephalograms were taken for 26 patients including 15 vertical growers and 11 horizontal growers ; also, 3 angular measurements and 4 linear measurements were evaluated. The following results were found. 1. The palatal plane was tipped anteroinferiorly in the vertical grower group. 2. The posterior facial height/anterior facial height ratio was increased in the horizontal grower group. 3. The Mandibular plane angle remained stable on both groups. 4. There was no significant difference between the two groups in the amount of maxillary molar extrusion.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.981-987
• /
• 1998

$La_{0.5}Sr_{0.5}MnO_{3-\delta}$ as air electrode for soild oxide fuel cell was synthesized by a citrate process and its cathodic polarization was determinated by the current interruption method on the Gd-doped ceria as electrolyte. The addition of citric acid increased the exothermic heat for the formation of $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ perovskite oxide. The degree of the initial particle agglomeration was affected by the exothermic heat. Also the increase of cal-cination temperature enlarged the particle size and the higher sintering temperature accelerated the den-sification of $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ layer after its being painted on $Ce_{0.8}Gd_{0.2}O_{1.9}$ electrolyte. In this study $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ synthesized by citrate process of which the molar ratio of citric acid to metal nitrate was 2 calcined at $650^{\circ}C$ for 2hr and sintered at 1100 at $1200^{\circ}C$ for 4 hrs after slurry coating on Ce0.8Gd0.2O1.9 electrlyte showed the lowest cathodic polarization.

• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.627-633
• /
• 2004

Lithium titanate whiske($Li_{x}Ti_{4}O_9$) was prepared by an ion-exchange reaction. To this end, the initial material, potassium tetratitanate ($K_{2}Ti_{4}O_9{\cdot}nH_{2}O$) was prepared by calcination of a mixture of $K_{2}CO_3\;and\;TiO_2$ with a molar ratio of 2.8 at $1050^{\circ}C$ for 3 h, followed by boiling water treatment of the calcined products for 10 h. Fibrous potassium tetratitanate could be transformed into layered hydrous titanium dioxide ($H_{2}Ti_{4}O_9{\cdot}nH_{2}O$) through an exchange of $K^{+}\;with\;H^{+}$ using 0.075 M HCl. Also, lithium titanate whisker was finally prepared as $Li^{+}\;and\;H^{+}$ ions were exchanged by adding 20 mL of a mixture solution of LiOH and $LiNO_3$ to 1g whisker and stirring for $5\~15$ days. The average length and diameter of the $Li_{x}Ti_{4}O_9$ whiskers were $10\~20{\mu}m\;and\;1\~3{\mu}m$, respectively.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.217-225
• /
• 1994

With the purpose of improving the therapeutic index of $[^3H]$ acyclovir (ACV) in the treatment of chronic hepatitis B infection, asialofetuin (AF) which after selective interaction with Ashwell's receptor specifically enters into hepatocytes, was chosen as a carrier system for hepatic targeting. This drug was first converted to its monophosphate (ACVMP), which was subsequently activated by water soluble carbodiimide to conjugate with ${\varepsilon}-NH_2$ groups of Iysine residues of AF. The molar ratio of ACVMP to AF in the conjugate was 3.9. In rats, elimination of ACVMP-AF conjugate after i.v. injection showed two phase elimination kinetics. Initial apparent elimination rate constant in rats was $0.191\;min^{-1}$ which was greater than that of ACV. The elimination rate constant from terminal phase was $0.021\;min^{-1}$. Area under the total radioactivities versus time curve was found to be several times larger in liver than in other organs (spleen, intestine, lung and kidney) after i.v. administration of the conjugate labelled in the drug moiety. The above results suggested that ACVMP-AF conjugate was rapidly taken up by hepatocytes and could be a useful hepatic targeting system.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.45-56
• /
• 1998

Methyl fructoside oleic acid polyester(MFPE), fructose-based sugar polyester, was synthesized by solvent-free, soap-free transesterification of methyl oleate with methyl fructoside(MF) as a sugar starting material in the presence of conventional potassium carbonate basic catalyst. Methyl fructoside was found to be an effective sugar starting material, because of its low softning point, high heat stability, high miscibility, and high reactivity than other sugars. Yield 98% of purified MFPE based on initial weight of MF was obtained at 1:5 of the molar ratio of methyl fructoside to methyl oleate, 2%(w/w) of potassium carbonate catalyst content, 20${\sim}$200mmHg of reduced pressure and $180^{\circ}C$ of reaction temperature. MFPE structure was confirmed by infrared and proton nuclear magnetic resonance spectroscopy. Physical properties of methyl of fructoside oleic acid polyester such as viscosity, HLB, solubility, color, refractive index, specific gravity, and density were similar to physical properties of sucrose polyesters(SPE) and vegetable oils. Then, it was elucidated that MFPE was sufficient to replace the SPE and conventional oils.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.409-413
• /
• 2008

A simple method for the purification of porphyran from laver Porphyra yezoensis was developed to obtain information for the development of food materials with biological functionality. Crude porphyran (CP) was extracted from dried laver in boiling water for 3 h, and then fractionated using cetylpyridinium chloride into an acidic fraction (CP-F1) and a neutral fraction (CP-F2). CP-F1 was fractionated further by fractional ethanol precipitation. Fraction CP-F1-70, precipitated at an ethanol concentration of 61-70% was the major fraction containing 68.1% of the yield from the initial fraction CP-F1. The CP-F1-70 fraction displayed a single band on Sepharose CL-4B with a molecular mass of 550 kDa, indicating a homogeneous polysaccharide. The molar ratio of galactose, 3,6-anhydro-L-galactose, 6-0-methyl-D-galactose and ester sulfate of CP-F1-70 was 1:0.32:0.07:0.53. This method is very useful for rapid and large-scale preparation of purified porphyran because it is compatible with mass production.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3570-3576
• /
• 2013

Poly(methacrylic acid)-functionalized SBA-15 silicas (denoted as P-x-PMA/SBA-15 where x is molar ratio of TSPM/(TEOS+TSPM) in percentage in the initial mixture) were synthesized by co-condensation of tetraethoxysilane and varying contents of 3-(trimethoxysilyl)propyl methacrylate in acidic medium with the block copolymer Pluronic 123 as a structure directing agent and then polymerization by methacrylic acid in the presence of ammonium persulfate as an initiator. The functionalized materials were characterized by PXRD, TEM, SEM, IR, and $N_2$ adsorption-desorption at 77 K. The investigation of phenol adsorption in aqueous solution on the materials showed that the poly(methacrylic acid)-functionalized mesoporous silicas possess strong adsorption ability for phenol with interaction of various kinds of hydrogen bonds. The adsorption data were fitted to Langmuir isotherms and the maximum adsorption capacity of the three functionalized materials P-5-PMA/SBA-15, P-10-PMA/SBA-15, and P-15-PMA/SBA-15 to be 129.37 mg/g, 187.97 mg/g, and 78.43 mg/g, respectively, were obtained. The effect of the pH on phenol adsorption was studied.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.503-508
• /
• 2005

A simple and effective method for the synthesis of LiMn$_{2}$O$_{4}$ powder as a cathode material for lithium secondary battery is reported. Micrometer size LiMn$_{2}$O$_{4}$ was prepared by combustion synthesis technique employing initial mixture of l.l LiNO$_{3}$ -1.3Mn-0.7MnO$_{2}$-1NaCl composition. Parametric study of the combustion process including molar ratio of Mn/MnO$_{2}$ and NaCl concentration were carried out under air atmosphere. The combustion products obtained were additionally heat treated at the temperature 900$^{\circ}C$ and the washed by distilled water. The results of charging-discharging characteristics revealed that LiMn$_{2}$O$_{4}$ cell synthesized in the presence of NaCl had a high capacity and much better reversibility than one formed without NaCl An approximate chemical mechanism for LiMn$_{2}$O$_{4}$ formation is proposed.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.337-343
• /
• 2014

A single layer ultrafiltration(UF) ceramic membrane was prepared using boehmite sol. Boehmite was synthesized using a typical sol-gel process with optimization of the viscosity, pH, molar ratio of aluminum isopropoxide(AIP) and $HNO_3$. Boehmite sol was coated on a microfiltration(MF) support using the dip-coating method. MF support was dipped into the boehmite sol with a withdrawal speed of 5 mm/s and was maintained for 10 s in the boehmite sol, resulting in a uniform UF membrane layer of $10{\mu}m$ thickness. The porosity of the obtained membrane was measured and found to be 41.2%; the pore size was found to range from 80~100 nm, corresponding to the pore size of the UF membrane. The flux of the obtained membrane was initially 540 $L/m^2h$ and approximately 85% of the initial flux was recovered using a periodic back-flushing process.