• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.6
• /
• pp.99-110
• /
• 1997

The study was conducted in order to investigate the basic geotechnical properties of sand-bentonite mixtures with the various bentonite contents. The results obtained are as follows : 1. Optimum moisture content of sand-bentonite mixtures was approximately 17.10~18.52% corresponding to the maximum dry density of 1.58~1 .64gf/$cm^3$. As the bentonite contents and curing peroid increased, both the maximum dry density and optimum moisture content of sand-bentonite mixtures increased. 2. The unconfined compressive strength of sand-bentonite mixtures increased as the increase of bentonite content, but it did not change along the curing period. 3. The sand-bentonite mixtures ruptured at 8~15% of the axial strain and the maxi-mum shearing stress was about O.7Okgf/$cm^2$. 4. According to the increase of bentonite content, the cohesion intercept and internal friction of the sand-bentonite mixtures increased slightly in the shear test, while the cohesion intercept increased largely, and the internal friction angle decreased largely in the triaxial test. 5. Both the initial void ratio and swelling of the sand-bentonite mixtures were very low with respect to the consolidation pressure increase. 6. The swelling and shrinkage of sand-bentonite mixtures increased slightly according to the increment of bentonite content.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.29-37
• /
• 1984

This study was made to find several significant relations among various physical and mechanical properties including cone penetration resistance. The alluvial clay samples were taken at the Daebul Reclaimed Tideland in Samhomyeon, Yeongamgun, Jeonranamdo. The results of the study are summarized as follows; 1.Most samples belong to medium or high plastic, inorganic, silty clay(clay contents;32-64%, silt contents; 36-68%, sand contents; 0-3%). The specific gravities range from 2.70 to 2.73, the unit weights from 1.45 to 1. 75g/cm$^3$, the natural moisture contents from 45 to 77%, the liquid limits from 32 to 56%. It is certain that the foundation is weak because the natural moisture contents are much higher than the liquid limits. 2.It is known from the shear tests that the unconfined compression strenghs vary from 0.09 to 0. 38kg/cm2, the cohesions from 0.05 to 0. 21kg/cm2, the internal friction angles from 0 to 3˚. 3.The consolidation tests show that the initial void ratios range from 1.25 to 2.28, the compression indeices from 0.43 to 0.84, the preconsolidation loads from 0.21 to 0.74kg/cm$^2$. 4.Cone penetration resistances are usually less than 5kg/cm$^2$ from ground surface to the depth of about 8m, and from S to l0kg/cm$^2$ in the layer below about 8m to hard layer. 5.The cohesion and cone penetration resistance are in proportion to the depth of soil layer. 6.The correlations between various physical and mechanical properties including cone penetration resistance for the alluvial clay samples are as follows; a) Wn=0.944C+ l2.733 (r=0.829) b) LL=0. 728Cy+6. 991 (r=0. 873) c) PI=0.659Cy-8.168 (r=0.860) d) rt=0. 0077(272-Wn) =2.092-0. 0077Wn (r=0. 859) e) 60=0. 035wn-0 447 (r=0. 893) f) C=0.380qw+0.031 (r=0.816) g) qu=0.0707qc+0.029 (r=0.810) h) C=0.018Z+0.055 (r=O.802) I) qc=0. 415Z+1, 438 (r=0. 943)

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.15-23
• /
• 1980

Natural-air drying systems have been extensively used for cereal grains, and many researches on the systems have been conducted in foreign countries. However, little research on drying rough rice with natural air has been done. Especially . little research on natural air drying of rough rice based on weather data has been done in Korean. The objective of this study was to present fundamental data for estimating optimum requirements and basic information available for natural air drying of rough rice based on the weather data . The weather data analyzed in this study were the 10-year (1969 to 1978) record of air temperatures, wet-bulb temperatures and relative humidities, which were three-hourly observations in Taegu area. The results of this study are summarized as follows ; 1 From the results of weather data analysis the average air temperature was about $14.8^\circ$and the average relative humidty 67.5% . Average equilibrium moisture content appeared to be 13.8 percent on wet basis, which showed great potential for natural air drying in Taegue area in October. 2. Possible fan operation time based on the equilibrium moisture content of 15% on wet basis was about 14 hours a day during October in Taegu area. Probabilities of possible drying days based on minimum time available for drying in a day were analyzed. 3. Minimum air flow requirements based on the worst year were determined for different fan operation methods and initial moisture contents.

• Journal of the Korean Society of Tobacco Science
• /
• v.8 no.1
• /
• pp.23-31
• /
• 1986

The water content, physical property and sensory of cigarette brands lave been studied from the view point of the individual and inner packages. It was found that the cigarettes had absorbed the moisture from alto more than 56% of a relative humidity (RH) and lost it under RH, 56%. The critical moisture contents for the optimum quality of cigarette maintenance were 7.7% through 14.595 in the range of equilibrium relative humidity (ERH) 52.2%-63.5%. The ERH at the initial moisture content of 12.1% showed 58.8% When cigarettes were storaged in 9095 of RH and 4$0^{\circ}C$, the shelf life of the Inner package was respectively shown 18.8 days In cellophane, 33.3 days In PET(25u), 69.8 days in OPP and 73.5 days in OPP film coated with PVDC. As shown above, the longest life time was found in the OPP film coated with PVDC. In the individual packages, the shelf life of packaging materials used above was significantly short in the same conditions as of the inner packages. Each shelf life of the individual packages was same In order comparing with that of the inner Packages.

• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.155-160
• /
• 2005

The objective of this research was to establish a domestically available cooling storage technique by cold-air in winter, using winter cool air ventilation fur determining rough rice cooling method in the storage and dry bin. The rough rice storage characteristics of two test conditions, winter cool-air ventilation storage and ambient temperature storage, were evaluated from January to July 2001, using a storage and dry bin of 300-ton capacity. Results of this research are as follows: Grain temperature was from $-5.1\~-8.5^{\circ}C$ after winter cool-air ventilation, and grain initial temperature for ambient temperature bin storage was $0.3\~1.9^{\circ}C$. Moisture content of rough rice decreased from $0.28\;to\;0.93\%$ and from $1.53\;to\;1.92\%$ to compare with original moisture contents for winter cool-air ventilation, and for ambient temperature bin storage, respectively. Broken ratio of brown rice from winter cool-air ventilation bin increased from $0.16\;to\; 0.92\%$, and brown rice broken ratio was from $2.24\;to\;2.86\%$ for ambient temperature bin storage to compare with initial broken ratio. Hardness of stored rice increased along storage period increase in alt storage methods, and cooling bin storage increased rice hardness of 0.271kgf: this increasing was lower then the other methods from 0.059 to 2.239kgf. Germination rates were decreased approximately 9.03, 3.14 and $3.20\%$ for upper, middle, and bottom of ventilating winter air bin, respectively, and germination rates of 2.70, 3.47 and $4.14\%$ were approximately decreased for upper, middle, and bottom parts of ambient temperature bin storage, respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.6
• /
• pp.472-478
• /
• 2012

This study was carried out to investigate solid-state fermentation method using cellulolytic lactic acid bacteria Lactobacillus plantarum TO-2100 in order to increase piperidine alkaloid contents in mulberry leaves. Piperidine alkaloid, one type of which include 1-deoxynojirimycin (1-DNJ), is known to inhibit ${\alpha}$-glycosidase activities. Using this strain, the optimal solid-state fermentation conditions on mulberry leaves powder were found as the following: initial moisture content, temperature and relative humidity were 20%, $30{\sim}35^{\circ}C$ and 60 ~ 70%, respectively, and the fermentation time was 72 hrs. The piperidine alkaloid contents in the fermented mulberry leaves were 2.86% on dry powder, which is 7-fold increase from that of non-fermented mulberry leaves. The 1-deoxynojirimycin contents after applying preparative thin layer chromatography were 2.02% on dry powder, which is 8 times higher than that of non-fermented mulberry leaves. ${\alpha}$-Glycosidase activities was inhibited by 65.7 ~ 84.7% with 3 ~ 5% treatments of hot-water extracts of the fermented mulberry leaves, compared to 16.2 ~ 40.2% with 3 ~ 5% treatments of hot-water extracts of non-fermented mulberry leaves. Therefore, the results suggest that solid-state fermentation method does indeed increase of piperidine alkaloid contents on mulberry leaves.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.486-490
• /
• 2014

This study was conducted to investigate the effect of carbonized biomass from crop residues on soil carbon storage during soybean cultivation. The carbonized biomass was made by field scale mobile pyrolyzer. The treatments consisted of control without input and three levels of carbonized biomass inputs as $59.5kg10a^{-1}$, C-1 ; $119kg10a^{-1}$, C-2 ; $238kg10a^{-1}$, C-3. Soil samples were collected during the 113 days of experimental periods, and analyzed soil pH and moisture contents. Soil carbon contents and soybean yield were measured at harvesting period. For the experimental results, soil pH ranged from 6.8 to 7.5, and then increased with increasing carbonized material input. Soil moisture contents were slightly higher by 0.1~1.5% than the control, but consistent pattern was not observed among the treatments. Soil carbon and organic carbon contents in the treatments increased at 24 and 15% relative to the control at 15 days after sowing, respectively. Loss rate of SOC (soil organic carbon) relative to its initial content was 7.2% in control followed by C-1, 6.8%> C-2, 3.5%>C-3, 1.1% during the experimental periods. The SOC change rate decreased with increasing carbonized biomass rate. It was appeared that soybean yields were $476.9kg10a^{-1}$ in the control, and ranged from 453.6 to $527.3kg10a^{-1}$ in the treatments. However, significant difference was not found among the treatments. It might be considered that the experimental results will be applied to soil carbon sequestration for future study.

• Korean Journal of Food Science and Technology
• /
• v.18 no.6
• /
• pp.421-426
• /
• 1986

The carbohydrate characteristics and storability of two Korean traditional confections Seban-kangjeong (a Korean fried waxy-rice cookie) and starch-dashik (a Korean pressed starch cookie) were studied as compared with two Western confections fried cookie and biscuit. Seban-kangjeong showed lower contents of starch and sucrose and higher content of reducing sugar whereas starch-dashik showed higher contents of starch and sucrose and lower content of reducing sugar. Moisture content was higher in Korean confections than in Western confections. The degree of gelatinization was higher in Seban-kangjeong and fried cookie which were made through a frying process. Moisture adsorption isotherms were constructed for the four products. In storage test for 6 months under different temperature and humidity conditions, the relative humidity maintaining the initial moisture content of products was 68% for Seban-kangjeong and starch-dashik and 20% for fried cookie and biscuit. The ratio of retrogradation in storage was 15% in Seban-kangjeong, 20% in starchdashik and 28% in fried cookie and biscuit, showing the lowest progress in freezer storage.

• Journal of Environmental Health Sciences
• /
• v.23 no.2
• /
• pp.35-43
• /
• 1997

A study on the effect of the biodegradability of the composting bulking agent in the swine manurecomposting was carried out in a batch system. The purpose of this study is to prove the effect of the biodegradability of the composting-bulking agent on the efficiency of the composting. In this study, it is the lignins: Klason-Lignin in the volatile solid that the index of the biodegradability of the composting-material mixes which are pig manure-rice straw pig manure-sawdusts pig manuremixture of rice and ricestraw (2:1) pig manure-mixture of rice and sawdust (1:1). It was carried out in the same condition (moisture contents, air supply rate, C/N ratio, initial input weight, porosity-structure) except the biodegradability of the raw material mixes. One of the results from this study is that the biodegradability of the bulking agent in the sense of the VS lignin content is not an insignificant factor in composting reaction. The less contents of the lignin in VS, the more efficiencies of the cornposting reaction in use of these parameters for the degree of the reaction: temperature, the trends of the ash contents, the change pattern of the C/N ratio. Under some assumptions, it is able to induce rough model on the relation of the VS lignin contents with the efficiency of the degradability. In this model, the biodegradability of the bulking agent is not an insignificant factor however, it is flexible within some degrees of range.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.