• 한국전통조경학회지
• /
• 제38권1호
• /
• pp.28-35
• /
• 2020

본 연구는 전통정원 유적의 복원 사례를 살펴보고자, 한·중·일 궁궐정원유적을 대상으로 기단복원, 개별 정원요소 복원으로 구분하여 살펴보고, 이를 통해 각 보존기법별 고려되어야 할 특징들을 도출한 결과는 다음과 같다. 첫째, 기단복원이 이루어진 정원유적들을 살펴본 결과, 북해공원의 만불루 경구는 관련 문헌과 비교분석을 바탕으로 기단부와 주춧돌만을 복원하였다. 부여 관북리 유적은 발굴이 완료된 지역 중 연못과 수로, 대형건물 터에 남아있는 기단과 흙다짐 기초만을 복원하였다. 평성궁의 제2대극전은 건물지와 기단을 복원하고 주변에 제2태극전의 영역을 알 수 있도록 장대나 말뚝을 설치하였다. 둘째, 개별요소의 복원이 이루어진 경주 동궁과 월지는 초기 발굴조사를 통해 확인된 연못 정원유구와 사료들을 토대로 전통정원 유적을 선제적으로 복원하였다. 원명원의 황화진은 서양동판화와 관련 기록들을 토대로 복원하였으나 복원 이후 추가로 발견된 자료를 통해 현재의 모습과 다르게 복원한 점을 확인하였다. 평성궁 동원 정원은 기존 유구들을 복토하고 그 위에 건물들을 복원하였으며, 경석과 수로 등 대표적 정원 요소들을 보존처리하여 노출시키는 방법을 사용하였다. 셋째, 기단복원은 전통정원 유적의 현재 상태 또는 발굴조사를 통해 기단부가 확인된 경우로 입면 구성방식이나 규모 등이 확인된 기단부를 우선 복원하여 영역성을 확보하는 것이 중요하다. 일부복원은 전통정원 유적 내 일부 건물이나 시설물 등 개별 요소들에 대해 문헌 고증을 통한 복원이 가능한 대상들을 한정하여 복원하는 방법으로 면밀한 문헌 고증이 요구된다.

• 한국전통조경학회지
• /
• 제38권2호
• /
• pp.1-13
• /
• 2020

본 연구는 북경팔경과 관련된 시문과 서화를 비롯하여 고지도·고문헌 등을 분석하여 북경팔경의 시대별 변천과정과 경관인식 변화, 북경팔경의 물리적 경관요소 및 구조분석과 국가경영과의 관계, 마지막으로 북경팔경의 장소화과정을 고찰하였다. 북경팔경의 경점은 도성 밖과 안으로 각각 네 곳씩 분포하고 있으며, 도성 밖은 모두 황제의 휴식처이자 북경의 산수경관의 중심인 서산 지역에 집중되었고, 도성 안의 경점은 궁궐의 황제원림에 두 곳, 성곽 주변의 마을 두 곳에 분포하고 있다. 즉 북경팔경은 초기 조성될 때부터 황실, 황제, 황궁과 밀접하게 관련된 장소로 선정하였으며, 금 이후 원·명·청대를 거치면서 황제를 비롯한 수많은 학자들이 국가경영에 활용함으로써 점점 도성팔경으로서 성격이 짙어졌다. 도성 내 두 곳은 신선과 황제를 동격화하여 칭송하였으며, 도성 밖 두 곳은 도성주변의 마을 경관의 모습을 담고 있으면서 통치를 받는 백성들의 편안한 삶을 묘사하고 있다. 결국 팔경의 대부분 조망지역은 황궁과 황제와 관련이 있음을 알 수 있다. 북경팔경의 물리적 경관을 요소별로 살펴보면, 수도방비·인재선발·농사에 대한 내용을 담은 국가경영과 황제 칭송, 북경 민가의 모습을 담고 있다. 건륭제는 중국의 팔경(경관) 문화를 소상팔경(북송)→서호팔경(남송원말)→연경팔경(금대)→북경팔경(명대)→건륭제의 연산팔경(청대)으로 역사적 맥락을 계승하려고 하였을 뿐만 아니라 비석과 원림 조성을 통해 북경팔경의 장소화하는 과정을 확인하였다.

• 한국토양비료학회지
• /
• 제44권6호
• /
• pp.1306-1313
• /
• 2011

비멀칭 노지 밭토양 조건에서 총각무와 옥수수 재배시 퇴비단여과액비 (SCB) 시용 후 표토 (0-15 cm) 화학성의 경시적 변화와 작물생산성을 평가하였다. 밑거름으로 SCB액비의 처리수준은 총각무 재배시 질소시비량 $6kg\;10a^{-1}$, 옥수수 재배시 질소시비량 $10kg\;10a^{-1}$을 기준으로 무비구 (NF), 1배구 (SCB-1), 2배구 (SCB-2), 3배구 (SCB-3), SCB-1+NK 처리구의 5수준으로 하여 3반복 난괴법으로 배치하였다. SCB액비의 양분함량에 따라 토양 중 크게 증가한 항목은 전기전도도, 질산태질소와 치환성칼륨과 나트륨 함량이었다. 토양 유기물함량, 유효인산, 치환성칼슘과 마그네슘의 변화는 나타나지 않았다. 전기전도도와 질산태질소, 치환성나트륨 함량은 강우량과 비례하여 감소하였으며 2008년 옥수수 재배시 장마기를 지나면서 시험 전 수준으로 낮아졌다. 치환성 칼륨 함량은 장마기에 다소 낮아졌으나 시험 후인 8월에도 처리수준별로 높은 상태로 유지되어 토양 중 상당량 집적되는 것으로 나타났다. 총각무의 경우에는 SCB액비 처리량에 따라 생체중과 질소흡수량이 높았으나 옥수수 재배시에는 처리량에 따라 수량과 건물중이 증가하는 경향을 나타내지 않았다. SCB액비를 밑거름으로 적정량 사용하고 웃거름 시비방법을 개선하므로써 생산성을 높이고 환경부하도 줄일 수 있는 방법과 SCB액비를 장기간 연속하여 사용시 유기물함량 변화나 중금속 또는 미량원소 축적문제에 대해서 추가검토가 필요할 것으로 생각된다.

• 한국지반공학회논문집
• /
• 제38권10호
• /
• pp.61-74
• /
• 2022

최근 구조물 기초가 풍화암상에 위치하는 경우가 증가하는 추세로 풍화암상 기초의 적정 설계 지지력을 평가하고자 국내 지반조사서상 제안된 풍화암 기초 허용 지지력을 조사하였다. 조사 결과 몇몇 현장에 제안된 풍화암 허용 지지력은 약 400~700kN/m² 수준으로 그 편차가 큰 편이며 보수적인 값으로 판단되었다. 지반의 기초 허용 지지력은 설계 초기 기초 형식 결정에 중요한 지표로, 그 결정에 따라 공사비 및 공기에 큰 영향을 줄 수 있다. 이에 본 연구에서는 적정한 풍화암 지반의 허용지지력을 평가하고자 풍화암 지반에 대하여 총 6회의 대형 평판재하시험을 실시하고 지지력 및 침하 특성을 분석하였다. 시험 결과 지지력은 모두 1,500kN/m²이상으로 평가되었으며 기존 지지력 공식과 비교하였을 때 공내재하시험에 의한 지지력 평가식이 본 시험결과와 유사함을 확인하였다. 또한 대형 평판재하시험의 하중-침하 거동 역산에 의한 지반의 탄성계수는 공내재하시험의 탄성계수(E) 값 적용이 적절하다고 평가되었다. 본 연구에서의 대형 평판재하시험 결과 및 국내 타 현장에서의 평판재하시험 사례 등을 종합하여 볼 때 풍화암 허용 지지력은 1,000kN/m² 이상으로 평가된다. 그러나 기초 침하량은 기초 크기 증가에 따라 비례하므로 구조물 허용 침하량 기준에 따라 허용 지지력은 제한되어야 한다. 따라서 본 연구에서는 수치해석적 방법으로 기초 크기 및 풍화암 두께에 따른 기초 예상 침하량을 평가하였으며, 풍화암 지반상 기초 허용지지력이 1,000kN/m² 이상일 수 있는 기초 크기 및 지반 조건을 표로 제안하였다. 이는 기초 설계 초기 기초 형식 결정에 유용하다고 사료된다.

• 한국지구과학회지
• /
• 제43권1호
• /
• pp.128-139
• /
• 2022

백두산 성층화산체와 천지 칼데라 외륜산 정상부에 분포하는 홀로세에 분화한 규장질 화산암 시료와 플라이스토세 개마용암대지와 장백산순상화산체의 고철질 화산암 시료의 암석화학적 특징 분석을 통해 지체구조적 위치를 알아보았다. 백두산 화산지대에서 초기 고철질 분출물들은 개마용암대지와 장백산순상화산체를 형성하였으며, 대부분 알칼리계열의 현무암에서 조면현무암 또는 서브-알칼리(쏠레이아이트) 현무암에서 현무암질안산암의 성분이며, 백두산 성층화산체와 천지 칼데라 정상부 부근의 홀로세 분출물은 대부분 규장질의 조면암에서 유문암 성분이다. 고철질 화산암류와 규장질 화산암류 사이의 SiO₂ 54-62 wt.%가 결핍된 쌍모식 조성을 나타낸다. 이는 마그마작용이 지각내 신장형 지체구조적 위치에서 발생하였음을 지시하는 단서가 될 수 있다. 지구조판별도에서 고철질 화산암류들은 판내부 또는 판내부 알칼리암과 쏠레이아이트암의 영역에 구분되어 도시되는데 이는 TAS성분도의 결과와 잘 일치한다. 규장질 화산암류들은 규장질 화강암류에 적용하는 판별도에서 판내부화강암(WPG)의 지체구조적 위치에 도시된다. 지구조 판별도에서 판의 섭입과 관련한 도호 또는 대륙연변호의 영역에는 도시되지 않으며, 모두 판내부 영역에 도시된다. 미량원소 함량을 원시맨틀값으로 표준화한 거미도에서 섭입대 화산암류에서 특징적으로 나타나는 Nb, Ti 의 부(-) 이상을 나타내지 않으며, OIB와 유사한 패턴을 나타낸다. 미량원소 함량 조성은 섭입대에서 유래된 마그마 작용에 연관된 의미있는 증거를 나타내지 않는다. 이는 백두산화산지대의 마그마작용이 판내부 환경에서 있었음을 지시한다. 이들 화산암류의 판내부 지체구조 위치는 이 지역에서 발생하는 천발지진의 진원 깊이와도 조화적이다. 백두산화산지대의 화산암석들은 신생대 동안 맨틀 물질의 용승에 의한 판내부 화산활동의 결과로 해석된다.

• 공연문화연구
• /
• 제39호
• /
• pp.69-96
• /
• 2019

북한은 혁명가극 이전의 가극을 선택적으로 보존했다. 이중 초기 고전 각색 가극은 1950년대 이후 남북한의 가극 장르 변화를 추적하는데 중요 단서를 제공한다. <금강산 팔선녀>, <춘향전>, <콩쥐팥쥐>, <온달>은 비현실적인 상황을 조정하고, 계급 문제를 제기하는 방향으로 각색되었다. 초기 고전 각색 가극에서 부각시킨 인민은 신분 격차와 상관없이 부지런히 일하고 애국심을 갖춘 이였다. 또한 부당한 착취에 대해 조직적인 투쟁을 함께하는 공동 구성원이기도 했다. 이는 노동과 개인 생활의 통일, 낡은 것의 파멸, 그 파멸을 촉진하는 투쟁을 지지하는 창작 독려의 성과였다. 선별 보존된 작품들은 극장에서 집중시킨 감각을 일상에서 유지시키는 일종의 모범 사례이기도 했다. 고전 각색 가극은 신분제도 반대, 국토 찬양, 긍정적인 근로 방향과 같은 국가 강령을 자연스레 관객에게 각인시킬 수 있었다. 하나의 작품이 무대화되면 소재, 주제, 음악, 운영방안 측면에서 평가를 거쳐 생존 여부가 판단되었다. 그 표징은 '김일성'의 관람 여부 및 방향성 제시였다. 김일성 일가의 수정 지시 사항을 받아들여 집단이 재창조하고, 해외 공연을 통해 선전하는 과정은 혁명가극의 극작 및 홍보 방식과 맞닿는다. 이렇게 선별된 가극은 인민, 여성, 문학 차원에서 스토리텔링화 되면서 모델이 되었다. 이렇게 북한 초기 고전 각색 가극은 공적인 교감과 음악정치 구축의 상관성을 보여주는 사례이다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1051-1054
• /
• 1993

The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.

• 한국조경학회지
• /
• 제43권1호
• /
• pp.40-53
• /
• 2015

산업현장의 변화와 요구에 부응할 수 있는 인력을 체계적으로 양성하기 위하여 2001년에 국무조정실을 중심으로 NCS(National Competency Standards, 이하 NCS)와 국가자격체제(National Qualification Frameworks, 이하 NQF)의 도입이 결정되었다. 건설분야 내 조경 역시 2008년 "국가직무능력표준(NCS) -조경"이 시범 개발되어 2009년부터 3년간 시범운영되었다. 특히 2013년 출범한 박근혜 정부의 주요 국정과제 중 하나로 '학벌이 아닌 능력 중심의 사회 구현'이 채택되면서, 이를 실천하기 위한 구체적인 수단으로 NCS 체제 구축이 전국적으로 확산되고 있는 시점이다. 그러나 국가에서 개발한 NCS의 경우, 이상적인 직무수행능력을 명시하였기 때문에 각 대학의 학생수준의 차이, 기자재와 교수들의 확보문제, 현행교육과정의 시수 문제 등 실질적인 운영상의 문제점을 반영하지 못한 단점이 있으므로, 이를 현실적인 교육과정에 연착륙시키기 위해서는 현재의 교육과정과 NCS와의 차이 즉 갭(gap)을 명확히 분석하는 과정이 선행되어야 한다. 갭분석은 기존의 교육과정을 NCS 기반 교육과정으로 개편하기 위한 초기 단계의 방법론으로 NCS 능력단위별 능력단위요소와 수행준거를 기준으로 학과 내 기존 교육과정과의 괴리도 혹은 일치 정도를 1에서 5까지 리커트 척도를 활용하여 기입한 후 분석하는 방법이다. 이처럼 현재의 대학 내 교육과정과 NCS와의 일치 및 괴리 정도를 측정함으로써 향후 NCS 운영을 희망하는 대학에서는 NCS의 적용 가능성과 개발 운영 이후의 효과성을 검증할 수 있는 기초 도구를 확보할 수 있다. 갭분석을 통한 교육과정 개편의 장점으로는 첫째, 정부의 재정지원 사업과 연계하여 정성적인 학과별 NCS 도입률에 대한 정량적 지표를 제공할 수 있으며, 둘째, NCS 기반 교육과정 개편 시 부족한 혹은 포화상태인 부분에 대한 객관적인 기준을 제공해 준다. 즉, 해당 NCS 세분류 도입 시 부족한 능력단위 및 능력단위요소를 추출할 수 있으며, 기존 과목별 능력단위요소별로 보완 사항도 추출할 수 있는 동시에, 이를 통한 상세 강의계획서 및 기초 교과목 개설을 위한 방향성을 제시해 주는 장점이 있다. 다만, 현재까지 개발된 갭분석의 이론을 보완하여 보다 체계적으로 정비해야 하는 과제는 남아 있다. 교육부, 고용노동부는 산업현장의 요구를 교육훈련 및 자격에 체계적으로 반영하기 위해 관련 산업계 인사들이 모여 실무적인 차원에서 NCS 표준을 적극적으로 개발하고 보급하여야 하며, NCS 적용을 희망하는 대학에서는 일과 자격이 연계될 수 있는 교육과정을 NCS 기반으로 개편하여야 할 것이다. 이를 위해 대학에서는 관련 산업 전망 및 대학 내 교수자원과 지역 산업과의 관련성을 고려하여 적용하고자 하는 NCS 세분류를 명확히 선정하여야 할 것이다. 이후 NCS 기반 교육과정 개편을 위해 갭분석을 사용하여 개편의 방향과 기준을 보다 객관적이고 합리적으로 수립하여 교육과정명세서에 대한 명확한 논리적 근거를 확보하고 있어야 과정이수형 자격제도에 효율적으로 동참할 수 있을 것이다.

• 한국지반공학회논문집
• /
• 제35권5호
• /
• pp.5-19
• /
• 2019

암반으로 구성되어 있는 급경사($65^{\circ}{\sim}85^{\circ}$)비탈면이 장기간 안정한 상태로 유지되고 있는 자연현상을 고려할 때, 설계 및 초기 시공 단계에서 위와 유사한 지반 상태로 이루어진 깎기 암반비탈면에 대해 1:0.5(발파암 경사 기준)보다 급한 경사를 적용할 수 있을 것이다. 급경사로 설계 가능한 양호한 연속체 암반비탈면의 안정성을 검토하는 과정에서, 설계실무 측면에서 범용적인 암반강도정수 산정방법이 필요하게 되었다. Hoek 등(2002)이 수정 보완하여 발표한 Hoek-Brown 파괴기준과 GSI분류는 불연속구조의 영향을 충분히 고려한 암반특성화 시스템으로 평가되었으며, 응력변화에 따라 등가 Mohr-Coulomb 강도정수(등면적법)를 산출하는 방법을 제안하였다. 비탈면에서는 등가 M-C 강도정수가 최대구속응력(${{\sigma}^{\prime}}_{3max}$ 또는 수직응력)변화에 따라 민감하게 변화하므로 실무적으로 활용하기에 어려운 점이 있다. 이 연구에서는 양호한 연속체 암반비탈면에 대해 최대구속응력 범위이내에서 범용적으로 적용할 수 있는 강도정수산정방법(등각분할법)을 H-B 파괴기준을 응용하여 제안한다. 등각분할법 강도정수(A)의 타당성 및 적용성을 평가하기 위해, 연구대상 암반비탈면을 기존 실시설계 현장 인근에 있는 급경사 비탈면에서 암석종류별(화성암, 변성암, 퇴적암)로 선정하고, Hoek이 제시한 등가 M-C 강도정수(등면적법)들과 비교 분석하였다. 등면적법 및 등각분할법 등가 M-C 강도정수는 기본적인 자료인 기존 실시설계 현장의 실내 암석 삼축압축시험과 연구대상 암반비탈면의 불연속구조의 특성조사(Face Mapping)를 통해 RocLab 프로그램(H-B 파괴기준을 기본으로 전산화된 지반정수 산정 소프트웨어)을 활용하여 산정하였다. 산정된 등면적법 등가 M-C 강도정수는 상호 연동되어 점착력과 내부마찰각이 아주 크거나($45^{\circ}$ 이상) 작게 나타났다. 등각분할법 등가 M-C 강도정수는 등면적법 등가 M-C 강도정수의 중간 정도이며, 내부마찰각은 $30^{\circ}{\sim}42^{\circ}$의 범위를 보인다. 연구대상 암반비탈면의 등각분할법 강도정수(A)와 기존 실시 설계 현장에서 연구대상 암반비탈면과 유사한 암반상태(동일 등급 RMR)에 적용한 강도정수(B)와 비교 분석하고, 이 지반정수들로 적용한 비탈면 안정해석(한계평형해석과 유한요소해석) 결과를 통해 제안한 등각분할법의 적용성을 간접적으로 평가하였다. A와 B의 강도정수 차이는 10% 정도이다. 한계평형해석 결과(우기 기준), A적용 안전율(Fs)=14.08~58.22(평균 32.9), B적용 안전율(Fs)=18.39~60.04(평균 32.2)이며, 각 동일한 암석종류에 따라 상호 유사하게 나타났다. 유한요소 해석 결과, A적용 변위=0.13~0.65mm(평균 0.27mm), B적용 변위=0.14~1.07mm(평균 0.37mm)으로 매우 유사하다. H-B 파괴기준을 응용하여 등각분할법으로 산출한 지반 정수를 실무적인 전단강도로 적용할 수 있는 적용성 평가에서 유의미한 결과를 확인할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.