• 한국환경보건학회지
• /
• 제31권4호
• /
• pp.309-315
• /
• 2005

Volatile organic compounds (VOCs) and odor materials are major sources of air pollution in Ulsan city, where much chemical plants are located. Therefore, it is necessary to develop a new reactor which can remove VOCs and odor materials effectively and be equipped at the end of pipe easily. A modified reactor (bioscrubber trickling filter, BSTF), which have both characteristics of biofilter and bioscrubber, was developed and tested on its reactivity with several VOCs using two types of media, fiber and activated carbon 4- ceramic(A/C). It was observed that the removal efficiencies of several types of VOCs such as acetaldehyde, ethylalcohol, butanol, diethylamine and triethylamine were up to $95\%$ when they had about 100 ppm of initial concentration and 80 seconds of residence time. Good attachment of microorganisms to both media, where it is thought the reaction efficiency can be determined according to the amount of microorganisms attachment, observed with scanning electron microscopy(SEM). Initial pressure drops of the packed bed with both media were 229 $mmH_2O/m$ at A/C column and 670 $mmH_2O/m$, respectively. However, maximum pressure drop of fiber column during the operation was over 1,647 $mmH_2O/m$. Therefore, it was thought that the fiber material would not suitable to use in the local plant as a packed bed media.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.134.1-134.1
• /
• 2017

In this study, we propose a new scaffold fabrication method, "direct electro-hydrodynamic jet process," using the initial jet of an electrospinning process and ethanol media as a target. The fabricated threedimensional (3D) fibrous structure was configured with multilayered microsized struts consisting of randomly entangled micro/nanofibrous architecture, similar to that of native extracellular matrixes. The fabrication of the structure was highly dependent on various processing parameters, such as the surface tension of the target media, and the flow rate and weight fraction of the polymer solution. As a tissue regenerative material, the 3D fibrous scaffold was cultured with preosteoblasts to observe the initial cellular activities in comparison with a solid-freeform fabricated 3D scaffold sharing a similar structural geometry. The cell-culture results showed that the newly developed scaffold provided outstanding microcellular environmental conditions to the seeded cells (about 3.5-fold better initial cell attachment and 2.1-fold better cell proliferation).

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.457-464
• /
• 2006

The anterior cruciate ligament (ACL) is liable to a major injury that often results in a functional impairment requiring surgical reconstruction. The success of reconstruction depends on such factors as attachment positions, initial tension of ligament and surgical methods of fixation. The purpose of this study is to find isometric positions of the substitute during flexion/extension. The distance between selected attachments on the femur and tibia was computed from a set of measurements using a 6 degree-of-freedom magnetic sensor system. A three-dimensional knee model was constructed from CT images and was used to simulate length change during knee flexion/extension. This model was scaled for each subject. Twenty seven points on the tibia model and forty two points on the femur model were selected to calculate length change. This study determined the maximum and minimum distances to the tibial attachment during flexion/extension. The results showed that minimum length changes were $1.9{\sim}5.8mm$ (average $3.6{\pm}1.4mm$). The most isometric region was both the posterosuperior and anterior-diagonal areas from the over-the-top. The proposed method can be utilized and applied to an optimal reconstruction of ACL deficient knees.

• 한국미생물·생명공학회지
• /
• 제17권3호
• /
• pp.231-235
• /
• 1989

부착성 동물세포인 recombinant human embryonic kidney cell line 293을 5% FBS가 함유된 DME/F12(3:1) mixture 배지에서 배양할 경우 static culture에서와는 달리 미립담체 배양에서는 낮은 부착효율과 spreading의 저해현상이 관찰되었다. Cell line 293의 미립담체 배양에 있어서 배지내의 serum은 세포의 미립담체에 대한 부착속도(attach-ment rate)를 감소시킬 분만 아니라 세포의 증식을 저해한다는 사실을 확인하였다. 이러한 경우, conditioned microcarrier를 이용함으로써 미립담체로부터 세포의 탈착을 어느 정도 막을 수 있었다. 특히 autocrine growth factor를 생성하는 hepatoma cell line인 HpG 2 cell을 배양하여 얻은 conditioned medium을 serum-free medium에 첨가하여 사용함으로써 세포의 정상적인 성장 분만 아니라 growth-stimulation을 유도할 수 있었다.

• Asia Marketing Journal
• /
• 제20권4호
• /
• pp.65-94
• /
• 2019

The purpose of this study was to analyze the brand loyalty formation by positive labeling. Affecting such factors as involvement, self-image, community engagement, preference, and choice cutback, positive labeling can be seen as one of psychological factors that shapes consumer's behavior and their decision. This study was carried out because little research was done to examine the influence of positive labeling toward brand loyalty, and also to find out the benefits that consumers can get from being labeled in positive terms. Data were collected through survey questionnaire and 151 usable responses were used. Following a series of pretests and confirmatory factor analysis helped to purify measures and verify the psychometric properties of the scale. Structural equation modeling with AMOS was used for testing of research hypotheses. The result of data analysis demonstrated the positive relationship between labeling and brand loyalty, i.e. positive labeling indirectly leads to consumers' loyalty toward a brand. Findings revealed significant relationship between involvement and emotional attachment, as well as the relationship between community engagement and choice cutback. The results gave support for the hypothesis of moderating effect of buzz on the relationship between involvement and emotional attachment, even though the hypothesis of moderating effect of distinction was rejected. Taking Apple's rivalry strategy as initial point, this study highlights the role of labeling in creating social identity. The study attempts to show the positive consequences of labeling strategy for firms that seeks ways of good competition without engaging into conflicts.

• 치위생과학회지
• /
• 제16권1호
• /
• pp.93-100
• /
• 2016

이번 연구에서는 두 종류의 어태치먼트 시스템인 Kerator와 O-ring의 다양한 유지력을 가지는 matrix를 사용한 반복적인 착탈 후 평가를 통해 다음과 같은 결론을 얻었다. 초기 유지력은 KP군($62.09{\pm}6.00N$)에서 높았으며, 이어서 KR군($32.83{\pm}4.40N$), KB군($12.69{\pm}3.32N$), OO군($9.55{\pm}1.33N$), 그리고 OR군($9.35{\pm}0.71N$) 순으로 나타났다. 유지력 소실량은 KP군($22.26{\pm}8.02N$)에서 가장 높았으며, KR군($6.23{\pm}3.04N$), OO군($6.03{\pm}1.24N$), OR군($5.81{\pm}0.73N$), 그리고 KB군($0.87{\pm}1.46N$) 순으로 나타났다. 각 군 내의 초기 유지력과 2,500회의 착탈 후의 최종 유지력을 비교하였을 때, KB군을 제외한 모든 군에서 유의한 차이를 보였다(p<0.05). 어태치먼트 표면 마모양상은 Kerator와 O-ring의 matrix에서 눈에 띄는 변형과 손상이 관찰되었다. 각 patrix에서는 유지력 소실에 기여할 만한 변화는 관찰되지 않았다. 결론적으로 어태치먼트의 종류, 재료 그리고 초기 유지력 차이에 따라 마모양상이나 유지력 소실에 차이가 있음을 확 인하였고, 유지력이 보존되는 것처럼 보여도 SEM으로 관찰하였을 때 어태치먼트의 내부가 상당히 변형된 경우가 많았다. 따라서 적절한 유지력을 가진 어태치먼트를 선택하고 각 어태치먼트 시스템 별 적절한 교체시기를 숙지하여 그에따른 사용기간의 준수가 필요할 것으로 생각된다.

• Journal of Periodontal and Implant Science
• /
• 제25권2호
• /
• pp.397-406
• /
• 1995

The purpose of this study was to evaluate the changes of interproximal bone density by means of videodensitometer and to examine the clinical applicability of videodentitometer to assess the periodontal disease activity.Twelve interproximal sites, with periodontal pockets deeper than 5mm and vertical loss of bone on standard dental radiograph, were treated by subgingival curettage. The papilla bleeding index, the plaque index, the degree of mobility, the depth of pockets, and the level of attachment were measured. Standardized reproducible radiographs were taken by using the occlusal stent with parallelling film holder. The density of the interdental bone was measured on the radiographs by a videodensitometer at three levels: the most 'superficial' level; the 'deep' level, arbitrarily 1.5mm below: and the 'apical' level, where no bony changes were to be expected. The clinical parameter and the radiographical change were measured at initial, and 1 month, 3 months, and 6 months after treatment.The results were as follows :1. The papilla bleeding index and the degree of mobility decreased significantly until 3 months after subgingival curettage and showed the Same level in the remaining experimental periods. 2. The pocket depth mainly decreased due to the gingival recession until 1 month after treatment, but to the attachment gain after 1 month. 3. The density of the interdental bone did not show a significance increase until 1 month after treatment, but showed a steady increase throughout the 6 months of observation. 4. The close relationships were shown between the decrease in pocket depth and the gain of attachment and the improvement of bone density at 6 months after treatment.

• 한국환경복원기술학회지
• /
• 제6권2호
• /
• pp.78-88
• /
• 2003

This study was conducted to develop the plant-mat for ecological restoration which was formed as the thin multi-layers of woven nets, soil media, seeds, etc. The experimental site was selected at a slope of 240$m^2$ at the rear of Design College of Sangmyung University and divided into 8 sub-experimental plots (20$m^2$ each) according to mat types. (forest-type and grass-type mats with and without seed attachment, respectively) Also, the existing vegetation plot and the no-treatment plot were included in this experiment for comparison. The experiment construction was conducted on September 3, 2002. Mat covered plots regardless of seed attachment showed nearly no signs of erosion even if rainy season in summer compared to the no-treatment plot. Vegetation monitoring result showed that germination rates were somewhat high in both forest and grass-type mats without seed attachment in the initial germination stage. Although germination rates of seed attached mats were somewhat slower than non-seed attached mats in the germination stage, but over time, it showed a good rooting and shooting environment for germinated tree and grass species because of soil media existence within the mat. This indicates that while non seed-attached mats require follow-up maintenance, seed-attached mats does not require maintenance after rooting and germination.

• Journal of Periodontal and Implant Science
• /
• 제30권1호
• /
• pp.157-168
• /
• 2000

Periodontal surgery can be directed to remove the irritants from the tooth surface and reduce the periodontal pocket. The purpose of this study is to compare the clinical effects after between modified Widman flap and modified flap in periodontal patients. Ninety six molar area teeth of 9 patients were used. One of sextants performed a modified Widman flap, while the other side performed a modified flap. After initial periodontal therapy, the following measurements prior to surgery(baseline) were taken : pocket depth, gingival recession, clinical attachment level, tooth mobility, bleeding on probing. Also these measurements were taken at 4 weeks, 8weeks, and 12 weeks after surgery. Significant decrease of pocket depth was shown in both techniques, and the degree of decrease was significant in modified flap than modified Widman flap at 12 weeks. Significant increase of gingival recession was shown in both techniques, and the degree of increase was significant in modified Widman flap than modified flap at 4 weeks, 8 weeks, and 12 weeks. Significant attachment gain was shown in both techniques, and the degree of increase was significant in modified flap than modified Widman flap at 4 weeks, 8 weeks, and 12 weeks. Significant increase of tooth mobility was shown in both techniques at 4 weeks, but the decrease of tooth mobility was shown at 12 weeks. Greater decrease of bleeding on probing was shown in both techniques at 4 weeks. Modified flap was better than modified Widman flap in the decrease of gingival recession and the attachment gain. These results indicate that modified flap operation is better than modified Widman flap operation in the effect of periodontal treatment.

• 펄프종이기술
• /
• 제46권5호
• /
• pp.27-34
• /
• 2014

In-situ $CaCO_3$ formation onto recycled wood pulp was studied to improve optical properties and ash attachment to the fiber furnish in papermaking. We controlled initial reaction temperature of in-situ $CaCO_3$ formation method from $30^{\circ}C$ to $50^{\circ}C$. It was found that the attachment of newly formed $CaCO_3$ to recycled fibers, old newspaper (ONP) in this case, was stronger than that of ground calcium carbonate (GCC, mean dia. $2.4{\mu}m$) addition case, but was not much different among those formed at different temperature. Morphologies of newly formed $CaCO_3$ were changed according to the reaction temperature. More aragonite shape was seen at higher temperature. In-situ $CaCO_3$ formation increased brightness and lowered ERIC value of ONP sheet greatly at the same level of ash contents when compared to GCC addition method, but gave equivalent ERIC and brightness when compared to those of the precipitated calcium carbonate (PCC) addition method. However, tensile strength of the handsheets of the in-situ $CaCO_3$ formation method were much greater than those of the PCC addition method.