• 제목/요약/키워드: inherent anisotropy

검색결과 14건 처리시간 0.02초

Ultrasonic Flaw Detection in Composite Materials Using SSP-MPSD Algorithm

  • Benammar, Abdessalem;Drai, Redouane
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권5호
    • /
    • pp.1753-1761
    • /
    • 2014
  • Due to the inherent inhomogeneous and anisotropy nature of the composite materials, the detection of internal defects in these materials with non-destructive techniques is an important requirement both for quality checks during the production phase and in service inspection during maintenance operations. The estimation of the time-of-arrival (TOA) and/or time-of-flight (TOF) of the ultrasonic echoes is essential in ultrasonic non-destructive testing (NDT). In this paper, we used split-spectrum processing (SSP) combined with matching pursuit signal decomposition (MPSD) to develop a dedicated ultrasonic detection system. SSP algorithm is used for Signal-to-Noise Ratio (SNR) enhancement, and the MPSD algorithm is used to decompose backscattered signals into a linear expansion of chirplet echoes and estimate the chirplet parameters. Therefore, the combination of SSP and MPSD (SSP-MPSD) presents a powerful technique for ultrasonic NDT. The SSP algorithm is achieved by using Gaussian band pass filters. Then, MPSD algorithm uses the Maximum Likelihood Estimation. The good performance of the proposed method is experimentally verified using ultrasonic traces acquired from three specimens of carbon fibre reinforced polymer multi-layered composite materials (CFRP).

DEM study on effects of fabric and aspect ratio on small strain stiffness of granular soils

  • Gong, Jian;Li, Liang;Zhao, Lianheng;Zou, Jinfeng;Nie, Zhihong
    • Geomechanics and Engineering
    • /
    • 제24권1호
    • /
    • pp.57-65
    • /
    • 2021
  • The effects of initial soil fabric and aspect ratio (AR) on the small-strain stiffness (G0) of granular soils are studied by employing discrete element method (DEM) numerical analysis. Elongated clumps composed of subspheres were adopted, and the G0 values were obtained by DEM simulations of drained triaxial tests under different densities and initial confining pressure (p0). The DEM simulations indicate that the initial soil fabric has an insignificant effect on G0. The effect of the AR on G0 is related to the initial density. Namely, for dense specimens, G0 first increases with increasing AR, reaching a plateau value when the AR ≥ 1.5. However, for loose specimens, G0 gradually increases as the AR increases. Microscopic examination reveals that G0 uniquely depends on the coordination number of the particles (CN-particle) rather than the subspheres (CN-sphere) at the particulate level for the effects of initial soil fabric and AR. Finally, Poisson's ratio ν0 is also determined by CN-particle. In addition, based on data in literature and this study, ν0 can be fitted as ν0 = 5.920(G0/(p0)1/3)-0.99, which can be used to predict ν0 of granular soils based on the measured G0.

일축압축하에서 포천화강암의 역학적 이방성 (Mechanical Anisotropy of Pocheon Granite under Uniaxial Compression)

  • 박덕원
    • 지질공학
    • /
    • 제15권3호
    • /
    • pp.337-348
    • /
    • 2005
  • 포천 지역에 분포하는 쥬라기 화강암을 대상으로 미세균열 분포특성이 화강암의 역학적 성질에 미치는 영향에 대하여 연구하였다. 3종의 방향성 시편을 대상으로 일축압축시험이 실시되었으며, 각 시편은R(riftplane), G(grain plane) 및 H(hardway plane) 축에 각각 직각이다. 다양한 탄성 상수 중, 3 방향에 따른 포아송비의 변화가 검토되었다 파괴 강도 비-포아송비의 관계도에서 포아송비의 범위는 H-시편에서 가장 높은 분포양상을 보이며 G-시편, R-시편의 순으로 감소한다. 분포곡선은 $I\simIII$ 단계에서는 거의 선형이며, IV-3 단계에서는 기울기의 급격한 증가를 보인다. 관계도에서 보는바와 같이 파괴강도비 $0.92\sim0.96$에서 변곡점이 형성된다. IV-3단계는 탄성 영역의 밖에 속한다. 4단계의 파괴단계에서의 거동은 응력-체적변형율 곡선에서 분석되었다 암석의 거동을 지배하는 응력증분-체적변형율 방정식에서 특징적인 재료상수인 a, n, Q, m 및 $\varepsilon_v^{mcf}$가 결정되었다. 이들 상수중에서 미세균열의 폐합영역( I 단계)에서 고유의 미세균열의 공극률$(a, 10^{-3})$ 그리고 압축지수(n)는 각각 $a^R(3.82)>a^G(3.38)>a^H(2.32)$ 그리고 $n^R(3.69)>n^G(2.79)>n^H(1.99)4의 순서로 나타난다. 특히 IV 단계의 미세균열의 임계체적변형율($\varepsilon_v^{mcf}$)은 3번 면에 수직인 H-시편에서 가장높게 나타난다. 이러한 결과에서 포아송비 및 재료상수와 같은 역학적 성질은 2 조의 미세균열과 밀접한 관계를 보이고있다. 강도 이방성과 미세균열의 방향성과의 상관성은 암석의 파괴 연구에 주요하게 적용될 수 있다.

전기비저항 토모그래피와 시추공 레이다 탐사의 원리 및 응용 (Principles and application of DC resistivity tomography and borehole radar survey.)

  • 김정호;이명종;조성준;송윤호;정승환
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 1999년도 제2회 학술발표회
    • /
    • pp.92-116
    • /
    • 1999
  • 전기, 전자 토모그래피는 전기적인 물성을 이용하여 지하의 고분해능 영상을 획득하는 방법이며 주파수에 의하여 전기비저항, 전자탐사, 레이다 토모그래피로 나뉘어진다. 이들 중 전기비저항, 레이다 토모그래피는 최근 들어 국내에서도 특히 지반조사 분야에서 활발하게 이용되기 시작하고 있다 본 논문에서는, 전기, 전자 토모그래피 법 중 국내에서 사용되는 전기비저항 토모그래피 및 레이다 토모그래피를 포함한 시추공을 이용한 레이다 탐사의 원리 및 적용에 대하여 국내의 탐사 사례를 중심으로 논하였다. 특히 시추공을 이용한 레이다 탐사의 방법론적인 접근에 있어서는, 방향탐지 안테나를 이용한 레이다 반사법 탐사법과 이방성 토모그래피 문제가 석산 탐사 및 지반조사 사례를 이용하여 논의되었다 한편 전기비저항 토모그래피에서는 각종의 전극 배열의 장단점이 논의되었으며, 전기전도도가 높은 시추공 공내수 내에 전극이 위치하기 때문에 발생하는 시추공 효과에 대하여 설명하였다. 대부분의 사례들은 알려져 있는 지질 정보, 시추코아 검층자료, 텔레뷰어 등의 자료와 비교하여 논의하였다.

  • PDF