• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.579-587
• /
• 2019

In this paper, pounding tuned mass dampers (PTMDs) were designed to mitigate the multi-mode vortex-induced vibration (VIV) of stay cable utilizing the viscous-elastic material's energy-dissipated ability. The PTMD device consists of a cantilever metal rod beam, a metal mass block and a specially designed damping element covered with viscous-elastic material layer. Wind-tunnel experiment on VIV of stay cable model was set up to validate the effectiveness of the PTMD on multi-mode VIV mitigation of stay cable. By analyzing and comparing testing results of all testing cases, it could be verified that the PTMD with viscous-elastic pounding boundary can obviously mitigate the VIV amplitude of the stay cable. Moreover, the installed location and the design parameters of the PTMD device based on the controlled modes of the primary stay cable, would have a certain extent suppression on the other modal vibration of the stay cable, which means that the designed PTMDs are effective among a large band of frequency for the multi-mode VIV control of the stay cable.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.246-254
• /
• 2008

In this paper, a new efficient hidden node detection method is proposed to decide whether the RTS/CTS mechanism is necessary to resolve the hidden node problem for the data transmission of each node in infrastructure mode IEEE 802.11 wireless LANs. The nodes, for which the RTS/CTS mechanism is found to be not necessary by the hidden node detection method, can transmit their data frames without performing the RTS/CTS exchange. Only the nodes, for which the RTS/CTS mechanism is found to be necessary by the hidden node detection method, perform the RTS/CTS exchange before their data frame transmissions.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.237-245
• /
• 2007

In this paper, a modified PCF (Point Coordination Function) MAC (Medium Access Control) Protocol is proposed to support the multiple direct link communication between STAs (STAtions) in infrastructure mode IEEE 802.11 wireless LANs. By the proposed MAC protocol, the direct link communication between STAs, which are located within the communication range of each other, is allowed without the use of AP (Access Point) as a relay. Moreover, when multiple direct data communication between STAs can be simultaneously performed with a sufficiently small interference, multiple simultaneous direct link communication is allowed for the efficient use of radio bandwidth. AP polls STAs to grant the transmission opportunities using the direct link communication by transmitting the polling frames to STAs. An efficient polling method for granting the transmission opportunities to STAs is proposed to reduce the number of the polling frame transmissions and enhance the PCF MAC performance.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.239-244
• /
• 2022

R-Mode is terrestrial based Global Navigation Satellite System (GNSS) backup radio navigation technology which used existing maritime information service infrastructure. It has advantages on reduce the cost and reutilize the frequency resource. In this paper, we propose a method to develop a medium-frequency (MF) band R-Mode transmitting station by utilizing the currently operating Differential GNSS (DGNSS) reference station infrastructure. To this end, the considerations for co-operating the DGNSS reference station and the MF R-Mode transmitting station are analyzed. In this process, we also analyze what is necessary to configure the communication system as a navigation system for range measurement. Based on the analysis result, MF R-Mode transmitting station system is designed and architecture is proposed. The developed system is installed in the field, and the performance evaluation results is presented.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.6
• /
• pp.293-303
• /
• 2013

This paper deals with steel braced frame as increasing the lateral strength and ductility in order to seismic retrofit of existing buildings and discusses the designing criteria and calculation method of retrofitted buildings. The addition of steel braced frame can be effective for increasing the lateral strength and ductility of existing buildings. However, There is a problem in utilizing this method. It is the approach to provide an adequate connection between the existing RC frame and the installed steel braced frame, because global strength by failure mode(three type) depends on detail of connection and strength of existing RC frame. So, the designer must be confirmed if it satisfies the required performance or not. Failure mode of type I is the most appropriate for increasing the lateral strength and ductility. Seismic performance evaluation and strength calculation of seismic retrofit are performed by guideline by KISTEC(Korea Infrastructure Safety & Technology)'s "seismic performance evaluation and rehabilitation of existing buildings" and Japan Building Disaster Prevention Association. Buildings are modeled and non-linear pushover analysis are performed using MIDAS program.

• Journal of Korea Port Economic Association
• /
• v.34 no.2
• /
• pp.83-96
• /
• 2018

The improvement in logistics competitiveness is the key element of corporate competitiveness in the era of severe competition among companies and high oil prices due to globalization. For this reason, this study analyzed the effect of transportation mode selection factors of Indonesian export companies on the logistic performance in accordance with the logistics environment. The results of the analysis show that only the cargo characteristics, which are the transportation mode selection factor of export companies, had a significant effect on logistics; the services, time, and expenses, on the other hand, had no effect on logistics performances. This result reflects the poor logistic infrastructure of Indonesia. While the export company considers service, time, and expenses when choosing transportation mode, it had no effect on logistic performances due to poor logistic infrastructure. The poor logistic infrastructure of Indonesia has caused a rise in the overall logistic expenses of companies due to excessive transportation time over the transportation distance, unavailability of on-time acceptance and delivery, and increase in the transportation expenses and subsidiary expenses. These are also the factors that decrease the competitiveness of export companies and affect the promotion of the manufacturing industry and foreign investment for the purpose of job creation and industrialization by the Indonesian government. Therefore, the logistics infrastructure must be improved initially. This study determines various points in terms of the logistics infrastructure environment of Indonesia, a developing country, using previous studies and provides their implications.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.4
• /
• pp.77-93
• /
• 2024

The recent development of data collection technology, which conveys various travel data in real-world such as mobile data and probe vehicle data, facilitates transportation planners identifying specified spatio-temporal travel patterns. In this study, an easily implementable travel mode classification methodology was proposed to classify inter-regional trip-modes without modeling by superimposing trajectories generated from mobile phone signaling and transportation infrastructure points into a polygon scale of a shapefile in a GIS system. Each regional mode trip was classified according to the rules such as the presence of transportation infrastructure in the trip trajectory, travel time, and the presence of access trips. An accuracy test generates Type I and Type II error results table to verify the proposed methodology. As a result, it was found that the methodology developed showed the F1-Score of the air mode 1.00, rail mode 0.95, bus mode 0.73.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.892-899
• /
• 2006

In this paper, we propose an automatic switching technology between the ad-hoc and the infrastructure modes without user intervention in the IEEE 802.11b wireless LAN. Also, we design our proposed technology and implemented on the Linux machine. For this operation, the area within an Access Point (AP) coverage is defined as a switching area, and a node without any transmission in this area is assumed to be able to relay frames between the AP and nodes in the shaded area that is outside the coverage and cannot reach the AP. By using the proposed technology, it is possible to provide the seamless Internet access service to nodes at the ad-hoc mode in the shaded area. In this paper, we explains the operation of the detection method of the switching area, presents the flowchart and implementation environment. To prove the operation of our technology, we obtain the results of captured packets transmitted between nodes and throughput results through ftp transmission experiment. Hence, we can see that our proposed scheme can be improve the wireless access service in wireless and mobile networks.

• Journal of Korea Trade
• /
• v.25 no.1
• /
• pp.18-33
• /
• 2021

Purpose - This paper investigates the causal relationship between logistics infrastructure development and the economic growth of Korea. Considering the industrial and economic structure of Korea, it is likely that logistics infrastructure is positively associated with the economic growth of the country. Design/methodology - The causal relationship between logistics infrastructure and economic development is estimated using Vector Autoregressive (VAR) and Vector Error Correction Model (VECM) considering long-run equilibrium between the two factors. To this end, a dataset consisting of 7 logistics infrastructure proxies and 5 economic growth indicators covering the period of 1990-2017 is used. Findings - It was found that causality, in general, runs from logistics infrastructure development to economic growth. Specifically, the results indicate that maritime transport is positively associated with the economic growth of Korea in terms of GDP and international trade. In addition, other modes of transport also have a positive impact on either the GDP or international trade of Korea. Originality/value - While existing studies in this area are based on either regional observations or a specific mode of transport, this study presents empirical evidence on causality between logistics infrastructure and the economic growth of Korea using a more comprehensive dataset. In addition, the findings in this paper can provide valuable implications for transport infrastructure development policies.

• Computers and Concrete
• /
• v.30 no.1
• /
• pp.19-32
• /
• 2022

This paper presents an investigation into the failure of RC columns under impact loadings. A numerical simulation of 19 identical RC columns subjected to single and repeated impact loadings was performed. A free-falling hammer was dropped at midspan with the same total kinetic energy input but varying mass and momentum. The specimens under the repeated impact test were struck two times at the same location. The colliding index, defined as the impact energy-momentum ratio, was proposed to explain the different impact responses under equal-energy impacts. The increase of colliding index from low to high indicates the transition of the impact response from static to dynamic and failure mode from flexure to shear. This phenomenon was more evident when the column had a greater axial load and was impacted with a high colliding index. The existence of the axial load had an inhibitory effect on the crack development and increased the shear resistance. The second impact changes the failure mode from flexural to brittle shear as found in the specimen with 20% axial load subjected to high a colliding index. Moreover, a deflection prediction equation based on the impact energy and force was limited to the low colliding index impact.