• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.203-214
• /
• 2013

This study investigates quantitative methods for assessment of infrared analysis of concrete admixtures using correlation coefficients by performing IR scans following the ASTM C494/C494M-11 specifications. In order to achieve this goal, numerous IR scans were performed on specimens supplied by the manufacturer from different batches to ensure uniformity and equivalency. These scans were then analyzed to create correlation coefficients for each admixture. The correlation coefficients were used to quantitatively evaluate and interpret IR Scans of job samples. The study focused on 23 most commonly used concrete admixtures by the New Jersey Department of Transportation (NJDOT). They include air-entrainers, accelerators, retarders, water reducers, and other combinations of these admixtures. Their correlation coefficients were established by analyzing a total of 12 scans of each admixture from three different batches supplied by the manufacturer at different time intervals. In order to validate the obtained correlation coefficients and establish a target correlation, job samples were tested and compared to the obtained correlations. The study also evaluated the effects of drying time and using different types of KBr on correlation coefficients.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3112-3112
• /
• 2001

Near-Infrared Spectroscopy (NIRS) was investigated aiming at the identification of falsified drugs. The identification is based on comparison of the NIR spectrum of a sample with a typical spectra of an authentic drug using multivariate modelling and classification algorithms (PCA/SIMCA). Two spectrophotometers (Brimrose - Luminar 2000 and 2030), based on acoustic-optical filter (AOTF) technology, sharing the same controlling computer, software (Brimrose - Snap 2.03) and the data acquisition electronics, were employed. The Luminar 2000 scans the range 850 1800 nm and was employed for transmitance/absorbance measurements of liquids with a transflectance optical bundle probe with total optical path of 5 mm and a circular area of 0.5 $\textrm{cm}^2$. Model 2030 scans the rage 1100 2400 nm and was employed for reflectance measurement of solids drugs. 300 spectra, acquired in about 20 s, were averaged for each sample. Chemometric treatment of the spectral data, modelling and classification were performed by using the Unscrambler 7.5 software (CAMO Norway). This package provides the Principal Component Analysis (PCA) and SIMCA algorithms, used for modelling and classification, respectively. Initially, NIRS was evaluated for spectrum acquisition of various drugs, selected in order to accomplish the diversity of physico-chemical characteristics found among commercial products. Parameters which could affect the spectra of a given drug (especially if presented as solid tablets) were investigated and the results showed that the first derivative can minimize spectral changes associated with tablet geometry, physical differences in their faces and position in relation to the probe beam. The effect of ambient humidity and temperature were also investigated. The first factor needs to be controlled for model construction because the ambient humidity can cause spectral alterations that should cause the wrong classification of a real drug if the factor is not considered by the model.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.190-194
• /
• 2003

Two different types of nondestructive evaluation (NDE) techniques were employed to investigate the tensile behavior of ceramic matrix composites (CMCs). Two NDE methods, ultrasonic testing (UT) and infrared (IR) thermography, were used to assess defects and/or damage evolution before and during mechanical testing. Prior to tensile testing, a UTC-scan and a xenon flash method were performed to obtain initial defect information in light of UT C-scans and thermal diffusivity maps, respectively. An IR camera was used for in-situ monitoring of progressive damages. The IR camera measured temperature changes during tensile testing. This paper has presented the feasibility of using NDE techniques to interpret structural performance of CMCs.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1516-1516
• /
• 2001

During the recent years, wine analysis has played an increasing role due the health benefits of phenolic ingredients in red wine [1]. On the other hand there is the need to be able to distinguish between different wine varieties. Consumers want to know if a wine is an adulterated one or if it is based on the pure grape. Producers need to certificate their wines in order to ensure compliance with legal regulations. Up to now, the attempts to investigate the origin of wines were based on high-performance liquid chromatography (HPLC), gas chromatography (GC) and pyrolysis mass spectrometry (PMS) [l,2,3]. These methods need sample pretreatment, long analysis times and therefore lack of high sample throughput. In contradiction to these techniques using near infrared spectroscopy (NIRS), no sample pretreatment is necessary and the analysis time for one sample is only about 10 seconds. Hence, a near infrared spectroscopic method is presented that allows a fast classification of wine varieties in bottled red wines. For this, the spectra of 50 bottles of Cabernet Sauvignon, Lagrein and Sangiovese (Chianti) were recorded without any sample pretreatment over a wavelength range from 1000 to 2500 nm with a resolution of 12 cm$\^$-1/. 10 scans were used for an average spectrum. In order to yield best reproducibility, wines were thermostated at 23$^{\circ}C$ and a optical layer thickness of 3 mm was used. All recorded spectra were partitioned into a calibration and validation set (70% and 30%). Finally, a 3d scatter plot of the different investigated varieties allowed to distinguish between Cabernet Sauvignon, Lagrein and Sangiovese (Chianti). Considering the short analysis times this NRS-method will be an interesting tool for the quality control of wine verification and also for experienced sommeliers.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1259-1259
• /
• 2001

Meat becomes brown and rancid during storage in the refrigerator and display in the case. Color changes, metmyoglobin formation and lipid oxidation are the important problems in the transportation / distribution of meat and retail display. The freshness of meat is determined by the sense of vision and smell. Since conventional method determining lipid oxidation is time consuming and destructive (it needs to homogenize meat with reagents, filtrate, time for reaction and read optical density using spectroscopy), more rapid and nondestructive technical tools are desired. The objective of this work was to evaluate near-infrared spectroscopy as an analytical tool for determining meat color, metmyoglobin formation and lipid oxidation. in beef, pork and chicken. Semitendinosus and longissimus thoracis muscles from six beef steers, biceps femoris and longissimus thoracis muscles from twelve LWD crossbred pigs, and superficial pectoral muscles from twenty-four broilers were used. About a 5-cm diameter and 1-cm thick sample (20.0g) was cut from the muscle and placed on plastic foam, over-wrapped with PVC film, and displayed under flourescent lights at 4 degrees C. during 10 days for beef and pork or 4 days for chicken. The spectra was measured by NIR systems Model 5500 Spectrophotometer using fiber optic scan at range of 400 - 1100 nm. Data were recorded at 2 nm intervals and 10 scans / 10 sec were averaged for every sample. Data obtained were saved as log 1/Re, where Re is the reflectance energy, and then mathematically transformed to second derivatives to reduce effects of differences in particle size. $L^{*}$, $a^{*}$ and $b^{*}$, and metmyoglobin formation were determined by conventional spectrophotometer using the integrating sphere unit. 2-Thiobarbituric acid reactive substances (TBARS) were measured for lipid oxidation. A multiple linear regression was used to find the equation which would best fit the data. The number of wavelengths used in the equation was selected based on the fewer number compared to the increasing multiple correlation and Decreasing standard error. (omitted)

• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.570-573
• /
• 1999

Ca nitrate와 인산을 혼합한 용액을 졸-겔법을 이용하여 Si(100) 기판 위에 스핀 코팅하여 열처리 함으로써 의치공 재료에 응용되는 하이드록시아파타이트 박막을 제조하였다. Si 기판 위에 아이드록시아파타이트막을 코팅하여 건조시킨 다음, $500^{\circ}C$에서 10분간 초벌구이 열처리를 하였다. X-선 회절 분석을 이용하여 $500^{\circ}C$에서 하이드록시아파타이트 상의 생성을 확인하였고, $500^{\circ}C$~$700^{\circ}C$ 및 $900^{\circ}C$에서 각각 tricalcium phosphate상의 생성을 확인하였다. FTIR(Fourier transform infrared spectroscopy)의 결과를 바탕으로 열처리 온도 증가에 따른 탄소량의 변화와 결정화도의 증가를 확인하려 한다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.271-276
• /
• 2003

The Moderate Resolution Imaging Spectroradiometer (MODIS) on the Earth Observing System (EOS) of Terra and Aqua satellites, launched in December 1999 and May 2002, has been directly received by Korea Aerospace Research Institute (KARI) ground station facility from July 2002. MODIS scans a swath width of 2330 km that is sufficiently wide to cover Korean peninsular, Yellow and East Sea at once. The MODIS has 36 spectral bands between 0.415 $\mu\textrm{m}$ and 14.235 $\mu\textrm{m}$, i.e., through the visible into the thermal infrared. MODIS has been observed active fires, floods, smoke transport, dust storms, severe storms since February of 2000. The satellite imagery obtained through the MODIS will be utilized for many application such as national territorial management, agriculture, natural environment, atmosphere and ocean, etc. In this study is to introduce various application field of MODIS imagery and data processing system.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1617-1617
• /
• 2001

It is well known now that near infrared spectroscopy (NIRS) is a fast, no destructive, and inexpensive analytical technique that could be used to classify, identify, and authenticate a wide range of foods and food items. Therefore, the main aims of this study were to provide a new insight into the authentication of five strawberry (Fragaria x ananassa) varieties and to correlate them with geographical zones and the propagating methods used. Three weeks plants of five different strawberry varieties (F. x ananassa Duch. cv Camarosa, Seascape, Chandler, F. Chiloensis, and F. Virginiana) were cultivated in vitro first and then transferred to pots with special soil, and grown in a greenhouse at CINVESTAV, all varieties were acquired from California (USA). After 18 months, ten leaves from each variety were collected. Transmission spectra from each leave were recorded over a range of 10, 000-4, 000 cm$-^{1}$, 32 scans of each strawberry leave were collected using a resolution of 4 cm$-^{1}$ with a Paragon IdentiCheck FT-NIR System Spectrometer. Triplicates of each strawberry leave were used. All spectra were analyzed using principal component analysis (PCA) and soft independent modeling class analogy (SIMCA). The optimum number of components to be used in the regression was automatically determined by the software. Camarosa was the only variety grown from the same shoot but propagated by a different method (direct or in vitro). Five different classes (varieties) or clusters were observed among samples, however, larger inter class distances were presented by the two wildtype samples (F. Chiloensis and F. Virginiana). Camarosa direct and Camarosa in vitro displayed a small overlapping region between them. On the other hand, Seascape variety presented the smallest rejection percentage among all varieties (more similarities with the rest of the samples). Therefore, it can be concluded that the application of NIRS technique allowed the authentication of all strawberry varieties and geographical origin as well. It was also possible to form subclasses of the same materials. The results presented here demonstrate that NIRS is a very powerful and promising analytical tool since all materials were authenticated and classified based on their variety, origin, and treatment. This is of a tremendous relevance since the variety and origin of a plant material can be established even before it gives its typical fruit or flower.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3106-3106
• /
• 2001

Imaging spectrometry or hyperspectral imaging is a recent development that makes possible quantitative and qualitative measurement for food quality and safety. This paper presents the research results that a hyperspectral imaging system can be used effectively for detecting fecal (from duodenum, cecum, and colon) and ingesta contamination on poultry carcasses from the different feed meals (wheat, mile, and corn with soybean) for poultry safety inspection. A hyperspectral imaging system has been developed and tested for the identification of fecal and ingesta surface contamination on poultry carcasses. Hypercube image data including both spectral and spatial domains between 430 and 900 nm were acquired from poultry carcasses with fecal and ingesta contamination. A transportable hyperspectral imaging system including fiber optically fabricated line lights, motorized lens control for line scans, and hypercube image data from contaminated carcasses with different feeds are presented. Calibration method of a hyperspectral imaging system is demonstrated using different lighting sources and reflectance panels. Principal Component and Minimum Noise Fraction transformations will be discussed to characterize hyperspectral images and further image processing algorithms such as image band ratio of dual-wavelength images and its histogram stretching with thresholding process will be demonstrated to identify fecal and ingesta materials on poultry carcasses. This algorithm could be further applied for real-time classification of fecal and ingesta contamination on poultry carcasses in the poultry processing line.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.347-351
• /
• 2002

The Moderate Resolution Imaging Spectroradiometer (MODIS) on the Earth Observing System (EOS) Terra and Aqua satellites, launched in 1999 and 2002, is directly received by Korea Aerospace Research Institute (KARI) ground station facility. BURI engineers develop a system to receive direct broadcast downlink from MODIS to provide near-realtime, remotely-sensed, spaceborne data to the user community in Korea. MODIS scans a swath width of 2330 km that is sufficiently wide to cover Korean peninsular, Yellow and East Sea at once. The MODIS has 36 spectral bands between 0.415 fm and 14.235 $\mu$m, i.e. through the visible into the thermal infrared. MODIS has been observed active fires, floods, smoke transport, dust storms, severe storms since February of 2000. The KARI is preparing for distribution of direct broadcasted MODIS data to users in Korea. The MODIS database system will be designed and developed by KARI engineer for data service from year of 2003. MODIS data user group will be organized from $\.{O}$ctober to December 2002.