• Journal of Acupuncture Research
• /
• v.30 no.3
• /
• pp.165-171
• /
• 2013

Objectives : The purpose of this study is to investigate the effect of acupuncture treatment on a patient suffering from CRPS Type 1. Methods : A 30-year-old female patient suffering from CRPS Type 1 with symptoms of intense burning pain, joint stiffness, restricted mobility, rapid hair and nail growth, allodynia, hyperalgesia and coldness of the right leg was treated with acupuncture on six acupuncture points on the leg from 13 July to 18 July of 2011. Improvement of the patient's symptoms was evaluated by Numerical Rating Scale(NRS), Digital Infrared Thermographic Image(DITI). Results : After 6 days of treatment, NRS score decreased significantly and the DITI results showed moderate improvement in temperature. Conclusions : The results suggest that acupuncture may be an effective in reducing the symptoms of CRPS. Further study is needed to evaluate the significancy of this report.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.90-96
• /
• 1989

A new series of $dioxo-di-{\mu}-oxo-dimolybdate(V)(*image)$, has been prepared by the reaction of pyridinum oxoisothiocyanato-molybdate(V) with 1, 6-diaminohexane-N, N, N', N'-tetraacetic acid derivatives containing amine carboxyl groups. The properties and possible molecular structure of these complexes were discussed by elemental analysis, spectroscopic studies and magnetic susceptibility measurements. The infrared spectra of these complexes show two strong Mo=$O_t$ stretching modes in the $900-965cm^{-1}$, MoO$_2$Mo stretching bands at around 450∼500 and $740-765 cm^{-1}$ to symmetrical and asymmetrical O-bridge stretching, a coordinated $COO^-$ asymmetrical band in the $1600-1635 cm^{-1}$. The complexes synthesized were yellow or orange and diamagnetic.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.327-333
• /
• 2014

To improve thermal environments in urban area, the structural characteristic analysis of thermal environments of the certain area should be preceded to analyze and supplement its problems. With Landsat-8, we measured the centrality estimation, the distribution map, and the spatial statistical analysis of Daegu Metropolitan City in January and August, which of data applied in analyzing the structure of thermal environments following to its spatial property. The thermal infrared band of satellite images has been used to analyze the standard normal deviated scores, which extract the centrality, while the cluster map, based upon Local Local Moran's I, has composed for understanding the autocorrelation of local spatial within environment space structure. Understanding the distribution features as well as the pivot center of thermal environments with satellite images provides principle database for updating urban thermal environments' policies and plans; because those are reference materials that should have precedence over for diverse thermal environment policies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.725-728
• /
• 2009

This paper describes remote monitoring system for the various environments of a vinyl house, which was located in rural or outer of urban by use internet web connection system in a long distance office. We have constructed remote monitoring system by use a simple experimental model for the monitoring of various factors which need to operate common vinyl house. The experimental model includes temperature, humidity, smoke and infrared sensors for the measuring and AC 220V light bulb for the controlling in the USN system. Also, we have developed monitoring software by use NI Labview and communicate between PC and sensors through the DAQ-board, USN control board. We use CCD camera and grab board for the real time remote monitoring of wanted image in the house area. The computer server for remote connection is constructed in the local PC with Apache web server, PHP and MySQL ODBC. We construct internet communication system for the monitoring remotely the local environments of a vinyl house system.

• Earthquakes and Structures
• /
• v.10 no.1
• /
• pp.53-71
• /
• 2016

Unconventional computer vision and image processing techniques offer significant advantages for experimental applications to shaking table testing, as they allow the overcoming of most typical problems of traditional sensors, such as encumbrance, limitations in the number of devices, range restrictions and risk of damage of the instruments in case of specimen failure. In this study, a 3D motion optical system was applied to analyze shake table tests carried out, up to failure, on a natural-scale masonry structure retrofitted with steel reinforced grout (SRG). The system makes use of wireless passive spherical retro-reflecting markers positioned on several points of the specimen, whose spatial displacements are recorded by near-infrared digital cameras. Analyses in the time domain allowed the monitoring of the deformations of the wall and of crack development through a displacement data processing (DDP) procedure implemented ad hoc. Fundamental frequencies and modal shapes were calculated in the frequency domain through an integrated methodology of experimental/operational modal analysis (EMA/OMA) techniques with 3D finite element analysis (FEA). Meaningful information on the structural response (e.g., displacements, damage development, and dynamic properties) were obtained, profitably integrating the results from conventional measurements. Furthermore, the comparison between 3D motion system and traditional instruments (i.e., displacement transducers and accelerometers) permitted a mutual validation of both experimental data and measurement methods.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.183-188
• /
• 2021

Objective: The purpose of this study was to develop a stretchable joint motion sensor that is based on silver nano-particle. Through this sensor, it can be utilized as an equipment for rehabilitation and analyze joint movement. Method: In this study, precursor solution was created, after that, nozel printer (Musashi, Image master 350PC) was used to print on a circuit board. Sourcemeter (Keithley, Keithley-2450) was used in order to evaluate changes of electric resistance as the sensor stretches. In addition, the sensor was attached on center of a knee joint to 2 male adults, and performed knee flexion-extension in order to evaluate accurate analysis; 3 infrared cameras (100 Hz, Motion Master 100, Visol Inc., Korea) were also used to analyze three dimensional movement. Descriptive statistics were suggested for comparing each accuracy of measurement variables of joint motions with the sensor and 3D motions. Results: The change of electric resistance of the sensor indicated multiple of 30 times from initial value in 50% of elongation and the value of electric resistance were distinctively classified by following 10%, 20%, 30%, 40% of elongation respectively. Through using the sensor and 3D camera to analyze movement variable, it showed a resistance of 99% in a knee joint extension, whereas, it indicated about 80% in flexion phase. Conclusion: In this research, the stretchable joint motion sensor was created based on silver nanoparticle that has high conductivity. If the sensor stretches, the distance between nanoparticles recede which lead gradual disconnection of an electric circuit and to have increment of electric resistance. Through evaluating angle of knee joints with observation of sensor's electric resistance, it showed similar a result and propensity from 3D motion analysis. However, unstable electric resistance of the stretchable sensor was observed when it stretches to maximum length, or went through numerous joint movements. Therefore, the sensor need complement that requires stability when it comes to measuring motions in any condition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.1-10
• /
• 2018

An experimental study was performed for the behavior of the burner flame which results from burning of the liquid hydrocarbon fuel atomized by an ultrasonic transducer. Configurations of the flame and combustion-field were caught by both high-speed camera and thermo-graphic camera, and those images were analyzed in detail through a image post-processing. As a result, the combustion-field grew and reaction-temperature rose due to the strengthening of combustion reaction with the increasing flow-rate of carrier-gas. In addition, a phenomenon of flame flickering was discussed through the comparative analysis of the variational behavior between the visible flame and IR (Infrared) flame-field. Also, the flickering frequency of the flame was confirmed through FFT (Fast Fourier Transform) analysis employing the flame area.

• Journal of Platform Technology
• /
• v.8 no.4
• /
• pp.20-28
• /
• 2020

In this paper, a voice, object, and optical character recognition platform including voice recognition-based smart wearable devices, smart devices, and web AI servers was proposed as an appropriate technology to help the visually impaired to live independently by learning the life cycle of the visually impaired in advance. The wearable device for the visually impaired was designed and manufactured with a reverse neckband structure to increase the convenience of wearing and the efficiency of object recognition. And the high-sensitivity small microphone and speaker attached to the wearable device was configured to support the voice recognition interface function consisting of the app of the smart device linked to the wearable device. From experimental results, the voice, object, and optical character recognition service used open source and Google APIs in the web AI server, and it was confirmed that the accuracy of voice, object and optical character recognition of the service platform achieved an average of 90% or more.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1026-1031
• /
• 2021

With the development of global automotive technology and the expansion of market size, demand for vehicles is increasing, which is leading to a decrease in the number of passengers on the road and an increase in the number of vehicles on the road. This causes traffic jams, and in order to solve these problems, the number of illegal vehicles continues to increase. Various technologies are being studied to crack down on these illegal activities. Previously developed systems use trigger equipment to recognize vehicles and photograph vehicles using infrared cameras to detect the number of passengers on board. In this paper, we propose a vehicle occupant detection system with deep learning model techniques without exploiting existing system-applied trigger equipment. The proposed technique proposes a system to detect vehicles by establishing triggers within images and to apply deep learning object recognition models to detect real-time boarding personnel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.619-627
• /
• 2021

Recent advance in low cost and light-weight drones has extended their application areas in both military and private sectors. Accordingly surveillance program against unfriendly drones has become an important issue. Drone detection and classification technique has long been emphasized in order to prevent attacks or accidents by commercial drones in urban areas. Most commercial drones have small sizes and low reflection and hence typical sensors that use acoustic, infrared, or radar signals exhibit limited performances. Recently, artificial intelligence algorithm has been actively exploited to enhance radar image identification performance. In this paper, we adopt machined learning algorithm for high resolution radar imaging in drone detection and classification applications. For this purpose, simulation is carried out against commercial drone models and compared with experimental data obtained through high resolution radar field test.