• 제목/요약/키워드: infrared image

검색결과 902건 처리시간 0.029초

오수혈의 화(火)혈과 수(水)혈의 운용을 통한 CRPS 제1형 환자 치험 1례 (Treatment of CRPS Type-I with Fire and Water Acupoints: A Case Report)

  • 김종한;유제혁;박지민;이승민;임세훈;이상훈;이재동;남동우
    • Journal of Acupuncture Research
    • /
    • 제30권3호
    • /
    • pp.165-171
    • /
    • 2013
  • Objectives : The purpose of this study is to investigate the effect of acupuncture treatment on a patient suffering from CRPS Type 1. Methods : A 30-year-old female patient suffering from CRPS Type 1 with symptoms of intense burning pain, joint stiffness, restricted mobility, rapid hair and nail growth, allodynia, hyperalgesia and coldness of the right leg was treated with acupuncture on six acupuncture points on the leg from 13 July to 18 July of 2011. Improvement of the patient's symptoms was evaluated by Numerical Rating Scale(NRS), Digital Infrared Thermographic Image(DITI). Results : After 6 days of treatment, NRS score decreased significantly and the DITI results showed moderate improvement in temperature. Conclusions : The results suggest that acupuncture may be an effective in reducing the symptoms of CRPS. Further study is needed to evaluate the significancy of this report.

몰리브덴 (V) 와 1, 6-Diaminohexane-N, N, N', N'-tetraacetic Acid 계 착물합성과 그 성질 (Synthesis and Characterization of Molybdenum (V)-1, 6-Diaminohexane-N, N, N', N'-tetraacetic Acid Derivatives Complexes)

  • 오상오;최식영
    • 대한화학회지
    • /
    • 제33권1호
    • /
    • pp.90-96
    • /
    • 1989
  • 피리디니움 옥소이소치오시안네이토 몰리브테이트(V)와 아민 카르복실기를 가진 1,2-Diaminohexane-N,N,N'-tetracetic acid 유도체를 반응시켜 아민 카르복실기를 가진 디옥소-디-뉴우-옥소-디몰리브테이트(V) 착물을 합성하였다. 이들에 대한 원소분석, 스펙트라의 해석 그리고, 전기전도도의 측정으로부터 착물의 성질과 그 구조를 추정하였다. 적외선 스펙트라에서 Mo=$O_t$ 신축진동에 기인한 두 개의 흡수띠가 $900-965cm^{-1}$ 영역에서 관찰되었으며, MoO$_2$Mo의 비대칭 신축진동 및 대칭 신축진동은 $740-765 cm^{-1}$, $450-500cm^{-1}$에서 각각 나타났었고, 카르복실기와 금속 결합간의 비대칭 신축 진동이 $1600-1635 cm^{-1}$에서 흡수띠가 관찰되었다. 이들 착물은 노란색 혹은 오렌지색이며 반자성체 물질이였다.

  • PDF

Landsat-8을 활용한 대구시 열 환경구조 분석 (Aanalysis the Structure of Heat Environment in Daegu Using Landsat-8)

  • 김준현;최진호
    • 한국측량학회지
    • /
    • 제32권4_1호
    • /
    • pp.327-333
    • /
    • 2014
  • 도시 열 환경 개선을 위해서는 무엇보다도 특정지역의 열 환경에 대한 구조적 특성분석이 선행되어져 문제점을 분석하고 보완되어야 한다. 본 연구에서는 Landsat 위성을 활용하여 대구광역시의 1월과 8월의 열 환경의 중심성 측정, 분포도 작성, 공간통계 분석 등을 활용하여 공간적 특성에 따른 열 환경구조를 분석하였다. 분석을 위해 위성영상의 열적외밴드를 활용하여 표준정규분포화하여 점수로 중심성을 추출하였고, 국지적 공간에서의 자기 상관성을 파악하기 위한 국지적 모란지수(Local Local Moran's I)를 기초로 한 Cluster Map를 작성하여 환경공간구조의 분포 특성을 파악하였다. 따라서 위성영상을 활용한 열 환경 분포 특성과 중심지의 파악은 도시의 열 환경 개선 계획 및 관리방안을 모색하는데 필요한 중요한 기초자료로서 정부의 다양한 열환경 정책이나 계획에 우선시 되어야 할 참고자료를 제공하고자 한다.

Labview와 웹을 활용한 비닐하우스 원격감시 시스템 (Remote monitoring system of a vinyl house by web and Labview)

  • 박상국
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.725-728
    • /
    • 2009
  • 본 논문은 농촌이나 도심외곽의 대규모 비닐하우스 단지 등에서 비닐하우스 내부의 환경을 관리자가 직접 하우스 내부에 상주하지 않고도 자신의 컴퓨터에서 인터넷으로 접속하여 원격으로 감시하기 위한 시스템에 관한 것이다. 본 논문에서는 온도나 습도 등 비닐하우스 내부의 다양한 환경에 대한 모니터링이 가능한 원격 감시시스템을 테스트 모형을 사용해서 구현하고자 한다. 구현하고자 하는 테스트 모형은 계측용으로는 온도, 습도, 연기 및 적외선 센서를 사용하고, 제어용으로는 AC 220V 전구를 사용해서 USN 시스템 환경을 구현한다. 또한 윈도우용 모니터링 소프트웨어는 NI Labview를 사용해서 개발하고 DAQ 보드와 USN 제어보드를 연동해서 하우스 내부의 환경을 모니터링 할 수 있게 한다. 그리고 CCD 카메라 시스템과 이미지 Grab 보드를 연동해서 원격으로 하우스 내부를 실시간 감시할 수 있게 한다. 원격 접속용 컴퓨터 서버는 윈도우용 Apache 웹 서버와 PHP 및 MySQL ODBC를 연동해서 로컬에 구축하고, 사용자가 인터넷 웹브라우저를 사용해 서버에 접속하면 원격으로 하우스 내부의 환경을 모니터링이 가능하도록 인터넷 통신시스템을 구축한다.

  • PDF

Passive 3D motion optical data in shaking table tests of a SRG-reinforced masonry wall

  • De Canio, Gerardo;de Felice, Gianmarco;De Santis, Stefano;Giocoli, Alessandro;Mongelli, Marialuisa;Paolacci, Fabrizio;Roselli, Ivan
    • Earthquakes and Structures
    • /
    • 제10권1호
    • /
    • pp.53-71
    • /
    • 2016
  • Unconventional computer vision and image processing techniques offer significant advantages for experimental applications to shaking table testing, as they allow the overcoming of most typical problems of traditional sensors, such as encumbrance, limitations in the number of devices, range restrictions and risk of damage of the instruments in case of specimen failure. In this study, a 3D motion optical system was applied to analyze shake table tests carried out, up to failure, on a natural-scale masonry structure retrofitted with steel reinforced grout (SRG). The system makes use of wireless passive spherical retro-reflecting markers positioned on several points of the specimen, whose spatial displacements are recorded by near-infrared digital cameras. Analyses in the time domain allowed the monitoring of the deformations of the wall and of crack development through a displacement data processing (DDP) procedure implemented ad hoc. Fundamental frequencies and modal shapes were calculated in the frequency domain through an integrated methodology of experimental/operational modal analysis (EMA/OMA) techniques with 3D finite element analysis (FEA). Meaningful information on the structural response (e.g., displacements, damage development, and dynamic properties) were obtained, profitably integrating the results from conventional measurements. Furthermore, the comparison between 3D motion system and traditional instruments (i.e., displacement transducers and accelerometers) permitted a mutual validation of both experimental data and measurement methods.

은 나노입자 프린팅 기반의 재활치료용 신축성 관절센서 개발 (Development of Stretchable Joint Motion Sensor for Rehabilitation based on Silver Nanoparticle Direct Printing)

  • Chae, Woen-Sik;Jung, Jae-Hu
    • 한국운동역학회지
    • /
    • 제31권3호
    • /
    • pp.183-188
    • /
    • 2021
  • Objective: The purpose of this study was to develop a stretchable joint motion sensor that is based on silver nano-particle. Through this sensor, it can be utilized as an equipment for rehabilitation and analyze joint movement. Method: In this study, precursor solution was created, after that, nozel printer (Musashi, Image master 350PC) was used to print on a circuit board. Sourcemeter (Keithley, Keithley-2450) was used in order to evaluate changes of electric resistance as the sensor stretches. In addition, the sensor was attached on center of a knee joint to 2 male adults, and performed knee flexion-extension in order to evaluate accurate analysis; 3 infrared cameras (100 Hz, Motion Master 100, Visol Inc., Korea) were also used to analyze three dimensional movement. Descriptive statistics were suggested for comparing each accuracy of measurement variables of joint motions with the sensor and 3D motions. Results: The change of electric resistance of the sensor indicated multiple of 30 times from initial value in 50% of elongation and the value of electric resistance were distinctively classified by following 10%, 20%, 30%, 40% of elongation respectively. Through using the sensor and 3D camera to analyze movement variable, it showed a resistance of 99% in a knee joint extension, whereas, it indicated about 80% in flexion phase. Conclusion: In this research, the stretchable joint motion sensor was created based on silver nanoparticle that has high conductivity. If the sensor stretches, the distance between nanoparticles recede which lead gradual disconnection of an electric circuit and to have increment of electric resistance. Through evaluating angle of knee joints with observation of sensor's electric resistance, it showed similar a result and propensity from 3D motion analysis. However, unstable electric resistance of the stretchable sensor was observed when it stretches to maximum length, or went through numerous joint movements. Therefore, the sensor need complement that requires stability when it comes to measuring motions in any condition.

Slit-jet 노즐을 통해 분사되는 초음파 무화 액체연료 화염의 거동 (Behavior of the Ultrasonically-atomized Liquid-fuel Flame Injected through a Slit-jet Nozzle)

  • 김민철;김민성;김정수
    • 한국추진공학회지
    • /
    • 제22권6호
    • /
    • pp.1-10
    • /
    • 2018
  • 초음파 진동자에 의해 미립화된 탄화수소계 액체연료를 분사하는 버너에서 생성되는 화염의 거동을 고찰하기 위한 실험이 수행되었다. 고속카메라와 열화상 카메라를 이용하여 slit-jet 버너에서 생성된 화염과 연소장 이미지를 획득하였으며, 후처리 과정을 통해 화염과 연소장의 구조변이를 면밀히 분석하였다. 그 결과, 수송기체 유량이 증가하면 연소반응이 촉진되어 연소반응영역이 신장되고, 반응온도가 증가하였다. 또한, 시간 변화에 따른 가시화염과 IR 연소장의 거동변화 비교를 통해 화염의 진동원인을 고찰하였으며, 화염면적의 FFT분석을 통해 생성화염의 진동주파수도 확인하였다.

시각장애인의 라이프 사이클을 지원하는 인공지능 웨어러블 플랫폼 (Artificial intelligence wearable platform that supports the life cycle of the visually impaired)

  • 박시웅;김정은;강현서;박형준
    • Journal of Platform Technology
    • /
    • 제8권4호
    • /
    • pp.20-28
    • /
    • 2020
  • 본 논문에서는 시각장애인의 라이프 사이클을 사전에 학습하여 시각장애인의 자립생활을 돕는 적정기술로 음성인식 기반 스마트 웨어러블 디바이스, 스마트 기기 및 웹 AI서버를 포함하는 음성, 사물 및 문자 인식 플랫폼을 제안하였다. 시각장애인용 웨어러블 기기는 착용편의성과 사물인식기능 효율을 높이기 위해 리버스 넥밴드 구조로 설계하여 제작하였으며, 웨어러블 기기에 부착된 고감도 소형 마이크와 스피커는 웨어러블 기기와 연동된 스마트기기의 앱으로 구성된 음성인식 인터페이스 기능을 지원하도록 구성하였다. 음성, 사물 및 광학문자 인식 서비스는 웹 AI 서버에서 오픈소스 및 구글 API를 활용하였고, 서비스 플랫폼의 음성, 사물 및 광학문자 인식 정밀도는 실험을 통하여 평균 90%이상 달성하였음을 확인하였다.

  • PDF

차량탑승인원 탐지를 위한 딥러닝 영상처리 기술 연구 (Deep Learning Image Processing Technology for Vehicle Occupancy Detection)

  • 장성진;장종욱
    • 한국정보통신학회논문지
    • /
    • 제25권8호
    • /
    • pp.1026-1031
    • /
    • 2021
  • 세계 자동차 기술의 발전과 시장 규모의 확대로 차량 수요가 증가하고 있으며 이로 인해 차량탑승 인원은 감소하고 도로의 차량 수는 증가하는 추세이다. 이는 교통체증의 원인이 되며 이러한 문제를 해결하기 위해 다인승 전용차로 제도를 시행하고 있으나 불법 이용 차량은 계속 증가하고 있다. 이러한 불법 행위를 단속하기 위한 다양한 기술이 연구되고 있다. 기존에 개발된 시스템은 트리거 장비를 이용하여 차량을 인식하고 적외선 카메라를 통해 차량을 촬영하여 차량 탑승 인원을 감지한다. 본 논문에서는 기존 시스템 적용된 트리거 장비를 이용하지 않고 딥러닝 모델 기술을 적용한 차량탑승 인원탐지 시스템을 제안한다. 제안된 기술은 영상 내에 트리거를 설정하여 차량을 탐지하고 딥러닝 객체 인식모델을 적용하여 실시간 탑승 인원을 감지하는 시스템을 제안한다.

드론 탐지 및 분류를 위한 레이다 영상 기계학습 활용 (Machine learning based radar imaging algorithm for drone detection and classification)

  • 문민정;이우경
    • 한국정보통신학회논문지
    • /
    • 제25권5호
    • /
    • pp.619-627
    • /
    • 2021
  • 최근 드론은 가격 하락, 소형화와 함께 높은 기술 발전에 힘입어 드론 보급이 민군에 걸쳐 증가하면서 보안안전사고, 치안·안보 위협 등의 문제를 유발할 가능성도 커지고 있다. 드론으로 인해 발생하는 사건 및 사고를 예방하기 위해서는 드론의 출현에 대응할 수 있는 탐지 기술이 우선적으로 선행되어야 한다. 드론은 크기가 작고 전파 반사도가 낮은 재질로 구성되어 있어 음향, 적외선, 레이다의 운용만으로는 탐지가 어렵다. 최근 영상 식별 성능을 강화하기 위해 레이다 신호에 인공지능을 접목한 연구사례가 증가하는 추세이다. 본 논문에서는 레이다 영상을 이용한 드론 탐지 기술을 소개하며, 드론의 모의실험 데이터와 실제 실험 데이터를 기반으로 인공지능 기술에 적용하여 드론의 분류 정확도를 효과적으로 입증하였다.