• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.121-127
• /
• 2006

It is well known the fact that turbo codes has better performance as the number of iteration and the interleaver size increases in the AWGN channel environment. However, as the number of iteration and the interleaver size are increased, it is required much delay and computation for iterative decoding. Therefore, it is important to devise an efficient criterion to stop the iteration process and prevent unnecessary computations and decoding delay. In this paper, it proposes the efficient stop criterion algorithm for turbo codes using the maximum sign change of LLR. It is verifying that the proposal variable iterative decoding controller can be reduced the average iterative decoding number compared to conventional schemes with a negligible degradation of the error performance.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.155-161
• /
• 2014

The objective of this study is to weight analysis portable backpack system of infantry weapon systems for ergonomic design in manual materials handling tasks. For the product design, we analyzed the ergonomic guidelines and status of similar weapon systems by comparing the efficient operation performance provide for the basic data. Result of this study, the relationship between portability and mobility presented for schematic. In the short distance of the short biomechanical criterion, 1-2 hours in the middle of moving psychophysical criterion, 4 hour or more long-distance criterion applied for the physiological criterion for easy of trade-offs that need to be considered. This study suggests for 4 research items for infantry backpack system in manual materials handling tasks. Throughout the result of anthropometric populations, the 5%tile body weight for -0.91kg but 95%tile in 34.17kg considered to be margin for free, easy and efficient operation for the weight margin between portability and mobility in manual materials handling tasks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.865-875
• /
• 2012

In this paper, we optimize antenna locations for a distributed antenna system (DAS) with distributed antenna (DA) ports equipped with multiple antennas under per-DA port power constraint. Maximum ratio transmission and scaled zero-forcing beamforming are employed for single-user and multi-user DAS, respectively. Instead of maximizing the cell average ergodic sum rate, we focus on a lower bound of the expected signal-to-noise ratio (SNR) for the single-cell scenario and the expected signal-to-leakage ratio (SLR) for the two-cell scenario to determine antenna locations. For the single-cell case, optimization of the SNR criterion generates a closed form solution in comparison to conventional iterative algorithms. Also, a gradient ascent algorithm is proposed to solve the SLR criterion for the two-cell scenario. Simulation results show that DAS with antenna locations obtained from the proposed algorithms achieve capacity gains over traditional centralized antenna systems.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.473-483
• /
• 2014

Even though the ROC manifold for more than three dimensional space which is an extension of the ROC curve and surface has difficulty to represent graphically, the hypervolume under the ROC manifold (HUM) statistic can be defined and obtained based on AUC and VUS measures for the ROC curve and the ROC surface. Hence the definition and characteristics of the HUM for four dimensional space are studied in this work. By extension of the standard criterion of AUC for probabilities of default based on Basel II, the 13 classes of standard criterion of HUM are proposed in order to discriminate four classification models and some application methods are discussed. In order to explore the standard criterion of HUM whose values are obtained from various distributions, ternary plot is used and explained.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.51-57
• /
• 2009

Blind equalization techniques have been widely used in wireless communication systems. In this paper, we investigate the information potentials in the criterion of minimizing Euclidian distance between two PDFs criterion for adaptive blind equalizers and evaluate BER performance of the method that has utilized an appropriate balance between the two information potentials, one from output samples and ramdomly generated desired samples at the receiver and another from the interactions among output samples. The balanced information potential method has shown in the BER performance results that it can produce significantly enhanced BER performance in blind equalization applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.2873-2892
• /
• 2019

Reducing the interference to the licensed mobile users and obtaining the energy efficiency are key issues in cognitive heterogeneous networks. A corresponding rate loss constraint is proposed to be used for the sensing-based spectrum sharing (SBSS) model in cognitive heterogeneous networks in this paper. Resource allocation optimization strategy is designed for the maximum energy efficiency under the proposed interference constraint together with average transmission power constraint. An efficiency algorithm is studied to maximize energy efficiency due to the nonconvex optimal problem. Furthermore, the relationship between the proposed protection criterion and the conventional interference constraint strategy under imperfect sensing condition for the SBSS model is also investigated, and we found that the conventional interference threshold can be regarded as the upper bound of the maximum rate loss that the primary user could tolerate. Simulation results have shown the effectiveness of the proposed protection criterion overcome the conventional interference power constraint.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.407-420
• /
• 2018

In structural health monitoring, it is meaningful to comprehensively utilize accelerometers and strain gauges to obtain the modal information of a structure. In this paper, a modal estimation theory is proposed, in which the displacement modes of the locations without accelerometers can be estimated by the strain modes of selected strain gauge measurements. A two-stage sensor placement method, in which strain gauges are placed together with triaxial accelerometers to obtain more structural displacement mode information, is proposed. In stage one, the initial accelerometer locations are determined through the combined use of the modal assurance criterion and the redundancy information. Due to various practical factors, however, accelerometers cannot be placed at some of the initial accelerometer locations; the displacement mode information of these locations are still in need and the locations without accelerometers are defined as estimated locations. In stage two, the displacement modes of the estimated locations are estimated based on the strain modes of the strain gauge locations, and the quality of the estimation is seen as a criterion to guide the selection of the strain gauge locations. Instead of simply placing a strain gauge at the midpoint of each beam element, the influence of different candidate strain gauge positions on the estimation of displacement modes is also studied. Finally, the modal assurance criterion is utilized to evaluate the performance of the obtained multitype sensor placement. A bridge benchmark structure is used for a numerical investigation to demonstrate the effectiveness of the proposed multitype sensor placement method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.701-709
• /
• 2010

This paper presents an efficient signature recognition method by using the hybrid similarity criterion, which is in inverse proportion to distance and in proportion to correlation between the images. The distance is applied to express the spacial property of image, and the correlation is also applied to express the statistical property. The proposed criterion provides the robust recognition to both the geometrical variations such as position, size, and rotation and the shape variation. The normalized cross-correlation(NCC), which is calculated by considering 4 directions based on the histogram of binary image, is applied to express rapidly and accurately the similarity between the images. The proposed method has been applied to the problem for recognizing the 20 truck images of 288*288 pixels and the 105(3 persons * 35 images) signature images of 256*256 pixels, respectively. The experimental results show that the proposed method has a superior recognition performance that appears the image characters well. Especially, the hybrid criterion of NCC and ordinal distance has a superior recognition performance to the hybrid criterion using city-block or Euclidean distance.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.2889-2899
• /
• 1999

To maintain the traditional notion of global serializability in multidatabase systems has been recognized as one of difficult problems due to the autonomy of participating local database systems. In this paper, we propose a global concurrency control algorithm based on the relaxed concurrency control criterion in distributed MDBs, which can be applied to applications in which the database integration has no effect on the integrity constraints. In the proposed algorithm, the process to determine whether a global transaction can be executed or not consists of intra-validation phase and inter-validation phase.

• The Journal of the Korean dental association
• /
• v.54 no.11
• /
• pp.850-864
• /
• 2016

The Generalized Estimating Equations (GEE) approach is a widely used statistical method for analyzing longitudinal data and clustered data in clinical studies. In dentistry, due to multiple outcomes obtained from one patient, the outcomes produced from an individual patient are correlated with one another. This study focused on the basic ideas of GEE and introduced the types of covariance matrix and working correlation matrix. The quasi-likelihood information criterion (QIC) and quasi-likelihood information criterion approximation ($QIC_u$) were used to select the best working correlation matrix and the best fitting model for the correlated outcomes. The purpose of this study is to show a detailed process for the GEE analysis using SPSS software along with an orthodontic miniscrew example, and to help understand how to use GEE analysis in dental research.