• Korean Journal of Plant Taxonomy
• /
• v.48 no.2
• /
• pp.143-152
• /
• 2018

A comparative study of leaf epidermal microstructures in genus Aruncus (two species, five varieties) was carried out using scanning electron microscopy in order to evaluate their significance in terms of taxonomy. All of the leaves of the taxa studied here were amphistomatic with undulate anticlinal walls, and smooth and flat periclinal walls on both surfaces. The size range of the stomata complex is $8.95-21.97{\times}7.50-16.99{\mu}m$: the largest one was found in Aruncus dioicus var. astilboides (average $18.01{\times}13.47{\mu}m$) and the smallest was measured and determined to be A. gombalanus (average $11.11{\times}8.94{\mu}m$). An anomocytic stomata complex was found in all of the studied taxa. The stomatal frequency on average was $27.54/0.05mm^2$; it is highest in A. gombalanus ($60.4/0.05mm^2$) and lowest in A. dioicus var. acuminatus ($11.6/0.05mm^2$). Two types (short stalked capitate glandular trichome and non-glandular trichome) of trichomes are found in the leaves. The non-glandular trichome was divided into three types based on the presence and degree of development of subsidiary cells. Anomocytic stomata of the hypostomatic type and the distribution pattern of capitate glandular trichomes were the major characters in this genus. The stomata size and frequency, the epidermal cell structure, the trichome type and the distribution pattern may have diagnostic importance among the taxa in the genus. Our leaf micromorphological results provide useful information for the taxonomic revision of the genus Aruncus.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.669-681
• /
• 2021

The content of major constituents and antioxidant activities of two lavers (Pyropia seriata, Pyropia dentata) selected through breeding at different regions (Jangsan-do, Amtae-do, Dali-do, Jin-do, Muan) were compared in this study. The mineral contents of both cultivars were in the following order: K>Na>Mg>Ca>Fe>Zn>Mn>Cu. The content of major fatty acids was as follows: eicosapentaenoic acid>palmitic acid>arachidonic acid>dihomo-ɣ-linolenic acid. Main constituents of total and free amino acids were as follows: alanine>glutamic acid>aspartic acid. In particular, the total amino acid content in P. dentata was higher than that in P. seriata and was the highest in the sample from Jangsan-do in January. In addition, in terms of total phenolic content, reducing power, and DPPH radical-scavenging activity of both samples collected in January and February, P. dentata showed better characteristics than P. seriata. This study may provide useful information for the selection of laver in high quality.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.287-295
• /
• 2021

As facilities such as dam reservoir wetlands and agricultural irrigation reservoir wetlands are built, sedimentation occurs over time through erosion, sedimentation transport, and sediment deposition. Sedimentation issues are very important for the maintenance of reservoir wetlands because long-term sedimentation of sediments affects flood and drought control functions. However, research on resignation has been estimated mainly by empirical formulas due to the lack of available data. The purpose of this study was to calculate and compare the sediment deposition rate by developing a multiple regression model along with actual data and empirical formulas. In addition, it was attempted to identify potential causes of collapse by applying it to 64 reservoir wetlands that suffered flood damage due to the long rainy season in 2020 due to reservoir wetland sedimentation and aging. For the target reservoir, 10 locations including the GaGog reservoir located in Miryang city, Gyeongsangnam province in South Korea, where there is actual survey information, were selected. A multiple regression model was developed in consideration of physical and climatic characteristics, and a total of four empirical formulas and sediment deposition rate were calculated. Using this, the error of the sediment deposition rate was compared. As a result of calculating the sediment deposition rate using the multiple regression model, the error was the lowest from 0.21(m³km²/yr) to 2.13(m³km²/yr). Therefore, based on the sediment deposition rate estimated by the multi-regression model, the change in the available capacity of reservoir wetlands was analyzed, and the effective storage capacity was found to have decreased from 0.21(%) to 16.56(%). In addition, the sediment deposition rate of the reservoir where the overflow damage occurred was relatively higher than that of the reservoir where the piping damage occurred. In other words, accumulating sediment deposition rate at the bottom of the reservoir would result in a lack of acceptable effective water capacity and reduced reservoir flood and drought control capabilities, resulting in reservoir collapse damage.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1135-1147
• /
• 2021

In order to geometrically correct high-resolution satellite imagery, the sensor modeling process that restores the geometric relationship between the satellite sensor and the ground surface at the image acquisition time is required. In general, high-resolution satellites provide RPC (Rational Polynomial Coefficient) information, but the vendor-provided RPC includes geometric distortion caused by the position and orientation of the satellite sensor. GCP (Ground Control Point) is generally used to correct the RPC errors. The representative method of acquiring GCP is field survey to obtain accurate ground coordinates. However, it is difficult to find the GCP in the satellite image due to the quality of the image, land cover change, relief displacement, etc. By using image maps acquired from various sensors as reference data, it is possible to automate the collection of GCP through the image matching algorithm. In this study, the RPC of KOMPSAT-3A satellite image was corrected through the extracted matching point using the UAV (Unmanned Aerial Vehichle) imagery. We propose a pre-porocessing method for the extraction of matching points between the UAV imagery and KOMPSAT-3A satellite image. To this end, the characteristics of matching points extracted by independently applying the SURF (Speeded-Up Robust Features) and the phase correlation, which are representative feature-based matching method and area-based matching method, respectively, were compared. The RPC adjustment parameters were calculated using the matching points extracted through each algorithm. In order to verify the performance and usability of the proposed method, it was compared with the GCP-based RPC correction result. The GCP-based method showed an improvement of correction accuracy by 2.14 pixels for the sample and 5.43 pixelsfor the line compared to the vendor-provided RPC. In the proposed method using SURF and phase correlation methods, the accuracy of sample was improved by 0.83 pixels and 1.49 pixels, and that of line wasimproved by 4.81 pixels and 5.19 pixels, respectively, compared to the vendor-provided RPC. Through the experimental results, the proposed method using the UAV imagery presented the possibility as an alternative to the GCP-based method for the RPC correction.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1029-1042
• /
• 2021

As part of the next-generation Compact Advanced Satellite 500 (CAS500) project, CAS500-4 is scheduled to be launched in 2025 focusing on the remote sensing of agriculture and forestry. To obtain quantitative information on vegetation from satellite images, it is necessary to acquire surface reflectance through atmospheric correction. Thus, it is essential to develop an atmospheric correction method suitable for CAS500-4. Since the absorption and scattering characteristics in the atmosphere vary depending on the wavelength, it is needed to analyze the sensitivity of atmospheric correction parameters such as aerosol optical depth (AOD) and water vapor (WV) considering the wavelengths of CAS500-4. In addition, as CAS500-4 has only five channels (blue, green, red, red edge, and near-infrared), making it difficult to directly calculate key parameters for atmospheric correction, external parameter data should be used. Therefore, thisstudy performed a sensitivity analysis of the key parameters (AOD, WV, and O₃) using the simulated images based on Sentinel-2 satellite data, which has similar wavelength specifications to CAS500-4, and examined the possibility of using the products of GEO-KOMPSAT-2A (GK2A) as atmospheric parameters. The sensitivity analysisshowed that AOD wasthe most important parameter with greater sensitivity in visible channels than in the near-infrared region. In particular, since AOD change of 20% causes about a 100% error rate in the blue channel surface reflectance in forests, a highly reliable AOD is needed to obtain accurate surface reflectance. The atmospherically corrected surface reflectance based on the GK2A AOD and WV was compared with the Sentinel-2 L2A reflectance data through the separability index of the known land cover pixels. The result showed that two corrected surface reflectance had similar Seperability index (SI) values, the atmospheric corrected surface reflectance based on the GK2A AOD showed higher SI than the Sentinel-2 L2A reflectance data in short-wavelength channels. Thus, it is judged that the parameters provided by GK2A can be fully utilized for atmospheric correction of the CAS500-4. The research findings will provide a basis for atmospheric correction of the CAS500-4 in the future.

• Korean Journal of Environment and Ecology
• /
• v.35 no.5
• /
• pp.438-479
• /
• 2021

Basic information such as flora and their distribution are the key factors to consider for preserving plant diversity on a regional level. The number of plant species identified through a survey is closely related to the survey area and the number of habitats distributed within the survey area. In this study, we surveyed the flora of Mt. Maryong-san (PH) and Mt. Daeso-san (YH) located in Uljin-gun, Gyeongsangbuk-do, six and nine times, respectively. We planned to include a variety of habitats in the survey routes. As a result, we identified a total of 594 taxa composing of 112 families, 349 genera, 548 species, 10 subspecies, 34 varieties, and 2 formulas in the Mt. Maryong-san (PH) area and a total of 434 taxa composing of 89 families, 270 genera, 400 species, 9 subspecies, and 25 varieties in the Mt. Daeso-san (YH) area. Of the plants observed in the 21 habitats, the plants distributed in the transition zone around the valley and the dry grassland accounted for the highest proportion. The traditional graveyards located on the coast also served as the major habitat for the distribution of some plant species. In the two graveyards, 19 taxa of endemic plant species were surveyed. Moreover, the identified floristic target species included 1 taxon for grade V, 11 taxa for grade IV, and 24 taxa for grade III. A total of 77 taxa of naturalized plants were identified, and four of them were invasive alien plants as designated by the Ministry of Environment. The differences in the plants distributed in the area of Mt. Maryong-san (PH) and Mt. Daeso-san (YH) were mainly due to the difference in the size of each habitat distributed within the survey area. Moreover, it was judged that the entire vicinity of Mt. Daeso-san (YH) was not connected to the surrounding mountains and was an isolated area surrounded by farmland and residential areas.

• Korea Science and Art Forum
• /
• v.37 no.4
• /
• pp.205-216
• /
• 2019

Today, there have been more museums with architectural freeform structure. From an academic perspective, that caused a change in the paradigm of the genealogy of architectural forms. Accordingly, it has been required to find whether the freeform architecture influences an exhibition space. Therefore, in order to analyze the correlation between freeform architecture and exhibition space, this study looks into the tendency of actual freeform architecture through case analysis after 2000. An exhibition space of museum serves as a socially, culturally, and locally symbolic icon and has the function of delivering information to viewers through the aesthetic presentation of articles on exhibition. This study is meaningful in the point that it drew the conclusion of the correlation between freeform architecture and exhibition space in order to infer that a freeform exhibition space is more effective at viewers' spatial experience. The method and results of this study are presented as follows: Firstly, literature survey on the concept of the freerform architecture of museum and the classification of architectural forms was conducted and previous studies were analyzed in order to establish criteria. Secondly, a case study was conducted through visits to Singapore, Germany, and the Netherlands in order to look into the current state and characteristics of freeform architecture and exhibition space. In this case, Karel Vollers' architectural freeform criteria were used for analysis. Thirdly, to prove the correlation between freeform architecture and exhibition space, each case was cross-checked on the basis of Karel Vollers' architectural freeform criteria and freeform exhibition classification, and then results were drawn. The study results are presented as follows: Firstly, EX(angle, ortho) of freeform architecture had a significant correlation with the diagonal form of exhibition space. That was proved 92.3% accurately more in the Netherlands and Germany than in Singapore. However, the curve form of exhibition space had a unclear correlation. In Singapore case, the curve form correlation was made through RO, FR, and TW. Secondly, freeform architecture had complex-typed combination with the diagonal and curve forms of exhibition space. In particular, N-02 and G-02 had a combination form, basically EX, and partially various forms so as to induce the complexity of free form. As such, architectural freeform makes it possible to achieve infinite transformation in various combinations. For responses, combinational approaches are required in multilateral ways. Based on this study, it will be planned to analyze the correlation between freeform architecture of museum and exhibition presentation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.51-60
• /
• 2021

Modern society is becoming more informed and intelligent with the development of digital technology, in which humans, objects, and networks relate with each other. In accordance with the changing times, a garden system has emerged that makes it easy to supply the ideal temperature, humidity, sunlight, and moisture conditions to grow plants. Therefore, this study attempted to grasp the concept, perception, and trends of smart gardens, a recent concept. To achieve the purpose of this study, previous studies and text mining were used, and the results are as follows. First, the core characteristics of smart gardens are new gardens in which IoT technology and gardening techniques are fused in indoor and outdoor spaces due to technological developments and changes in people's lifestyles. As technology advances and the importance of the environment increases, smart gardens are becoming a reality due to the need for living spaces where humans and nature can co-exist. With the advent of smart gardens, it will be possible to contribute to gardens' vitalization to deal with changes in garden-related industries and people's lifestyles. Second, in current research related to smart gardens and users' experiences, the technical aspects of smart gardens are the most interesting. People value smart garden functions and technical aspects that enable a safe, comfortable, and convenient life, and subjective uses are emerging depending on individual tastes and the comfort with digital devices. Third, looking at the usage behavior of smart gardens, they are mainly used in indoor spaces, with edible plants are being grown. Due to the growing importance of the environment and concerns about climate change and a possible food crisis, the tendency is to prefer the cultivation of plants related to food, but the expansion of garden functions can satisfying users' needs with various technologies that allow for the growing of flowers. In addition, as users feel the shapes of smart gardens are new and sophisticated, it can be seen that design is an essential factor that helps to satisfy users. Currently, smart gardens are developing in terms of technology. However, the main components of the smart garden are the combination of humans, nature, and technology rather than focusing on growing plants conveniently by simply connecting potted plants and smart devices. It strengthens connectivity with various city services and smart homes. Smart gardens interact with the landscape of the architect's ideas rather than reproducing nature through science and technology. Therefore, it is necessary to have a design that considers the functions of the garden and the needs of users. In addition, by providing citizens indoor and urban parks and public facilities, it is possible to share the functions of communication and gardening among generations targeting those who do not enjoy 'smart' services due to age and bridge the digital device and information gap. Smart gardens have potential as a new landscaping space.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1657-1667
• /
• 2021

Anthropogenic activities and natural processes have been causes of land subsidence which is sudden sinking or gradual settlement of the earth's solid surface. Mexico City, the capital of Mexico, is one of the most severe land subsidence areas which are resulted from excessive groundwater extraction. Because groundwater is the primary water resource occupies almost 70% of total water usage in the city. Traditional terrestrial observations like the Global Navigation Satellite System (GNSS) or leveling survey have been preferred to measure land subsidence accurately. Although the GNSS observations have highly accurate information of the surfaces' displacement with a very high temporal resolution, it has often been limited due to its sparse spatial resolution and highly time-consuming and high cost. However, space-based synthetic aperture radar (SAR) interferometry has been widely used as a powerful tool to monitor surfaces' displacement with high spatial resolution and high accuracy from mm to cm-scale, regardless of day-or-night and weather conditions. In this paper, advanced interferometric approaches have been applied to get a time-series of land subsidence of Mexico City using four-year-long twenty ALOS PALSAR L-band observations acquired from Feb-11, 2007 to Feb-22, 2011. We utilized persistent scatterer interferometry (PSI) and small baseline subset (SBAS) techniques to suppress atmospheric artifacts and topography errors. The results show that the maximum subsidence rates of the PSI and SBAS method were -29.5 cm/year and -27.0 cm/year, respectively. In addition, we discuss the different subsidence rates where the study area is discriminated into three districts according to distinctive geotechnical characteristics. The significant subsidence rate occurred in the lacustrine sediments with higher compressibility than harder bedrock.

• 한국사회정책
• /
• v.25 no.2
• /
• pp.367-402
• /
• 2018

This study analyzed the relationship between the act on the guarantee of rights of and support for persons with developmental disabilities(Act for PWDD) and the similar ordinance of the local governments based on this law and focused on the correspondence(the rate of reflection) and the autonomy(differentiation). As of October 2017, 63 local government regulations and Act for PWDD were analyzed in this study. The results of the analysis are as follows: First, the rate of reflection in the ordinance of Act for PWDD was different according to the clause. In the aspect of emphasizing welfare support, the agreement between local ordinance and rate was high. While the Act for PWDD emphasized the rights of persons with developmental disabilities, there was little information about their right in the ordinance of local governments. This is evidence that current ordinance is based on the protective point of view for people with developmental disabilities. In the future, policy measures will be needed to ensure that respect for decision-making by persons with developmental disabilities and rights guarantees are included in the bylaws. Second, there is a provision that the rate of ordinance reflection is 0%, which may be guaranteed by other laws in the area, so it does not mean the absence of related system in the region, but there is possibility of institutional blind spot. In the future, consideration should be given to the complementarity of other legal systems in the area with developmental disabilities, so that persons with developmental disabilities should not be placed in institutional blind spots. Third, the autonomy(differentiation) of local ordinance was examined from the contents aspect and the administrative aspect to help practical implementation. The differentiation between the ordinances vary. Emphasizing the responsibilities of the head of the organization, emphasizing the fact-finding survey, setting up the welfare committee, or adding local needs were included to the ordinance. Local governments considering the enactment of ordinances in the future should refer to these cases and establish enactable local ordinances that take advantage of the characteristics of local autonomy.