• Archives of design research
• /
• v.16 no.4
• /
• pp.385-394
• /
• 2003

An investigation by KRNIC (Korea Network Information Center) on the real state of usage of internet has shown that 96.9％ of children investigated had experiences of using internet. Especially the firstly ranked item that had been answered by children as a necessity of internet was 'Studying to solve tasks' rated by 83.9％. As seen from the research result, the need as a homework sonics is actually so dominant that it cannot be ignored when considering the profitability at the area of education contents, but any profound research has not been accomplished yet. Internet has been positioned as a more effective and fruitful learning tool, and also all activities done by users for exploring informations and choosing learning items under the on-line circumstances are based on the successive mutual reactions between users and computers. Up to now much of the web based learning circumstances has been introducing the User Interface using metaphor, and the same is found dominantly from the sites for children. But in spite of the availability of metaphor mentioned above the current status is much lack of profound researches about metaphor interface; and what is more, in the case of the site for elementary school students the gap of the ability recognizing metaphor is very large between lower classes and higher classes according to the degree of mental growth but that is used to be simply ignored, then a common concept is adapted to interface for all grades of classes and moreover for infant and kindergarten without any objections. Based on foregoing problems this research has put the main focus on the groping and presenting desirable directions on the prospect design of interface for children-oriented sites by analyzing the status of practical usage of metaphor interface in the field of the sites for children-oriented learning sites with concentration upon homework supporting domains.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1898-1902
• /
• 2010

This study was designed to evaluate antioxidant activity of low-quality Codonopsis lanceolata treated by fermentation process followed by hydraulic high pressure extraction. C. lanceolata was subjected to 5,000 bar for 30 min at $25^{\circ}C$. The highest phenolics content was observed in the combined treatment of fermentation and high pressure extraction (35.11 mg/100 g), followed by high pressure extraction alone (14.78 mg/100 g) and conventional extraction (14.56 mg/100 g). The content of flavonoids followed the similar pattern as that of total phenolics, showing 280.86 mg/100 g of C. lanceolata treated by the combined fermentation with high pressure extraction whereas 193.05 mg/100 g of C. lanceolata treated by the conventional extraction. The DPPH scavenging activity was 69.32% at 0.6 mg/mL of C. lanceolata treated by the combined process, while the DPPH scavenging activities of C. lanceolata treated by high pressure extraction alone and the conventional extraction were 60.35% and 30.92%, respectively. The highest reducing power of C. lanceolata extract (1.0 mg/mL) was observed at the combined treatment (0.926), followed by high pressure extraction alone (0.881) and the conventional extraction (0.733). The combination of fermentation with high pressure extraction significantly increased the contents of phenolics and flavonoids and also enhanced the antioxidant activity. Therefore, the combined application of fermentation and high pressure extraction can be an alternative technique for the extraction of C. lanceolata. These results provide useful information for enhancing biological properties of low-quality C. lanceolata.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.749-758
• /
• 2004

In this paper, we propose a new method utilizing only raw corpus without additional human effort for disambiguation of target word selection in English-Korean machine translation. We use two data-driven techniques; one is the Latent Semantic Analysis(LSA) and the other the Probabilistic Latent Semantic Analysis(PLSA). These two techniques can represent complex semantic structures in given contexts like text passages. We construct linguistic semantic knowledge by using the two techniques and use the knowledge for target word selection in English-Korean machine translation. For target word selection, we utilize a grammatical relationship stored in a dictionary. We use k- nearest neighbor learning algorithm for the resolution of data sparseness Problem in target word selection and estimate the distance between instances based on these models. In experiments, we use TREC data of AP news for construction of latent semantic space and Wail Street Journal corpus for evaluation of target word selection. Through the Latent Semantic Analysis methods, the accuracy of target word selection has improved over 10% and PLSA has showed better accuracy than LSA method. finally we have showed the relatedness between the accuracy and two important factors ; one is dimensionality of latent space and k value of k-NT learning by using correlation calculation.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.21-36
• /
• 2005

Although the main geology of Korea consists of granite and gneiss, it Is not uncommon to encounter anisotropy Phenomena in crosshole radar tomography even when the basement is crystalline rock. To solve the anisotropy Problem, we have developed and continuously upgraded an anisotropic inversion algorithm assuming a heterogeneous elliptic anisotropy to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. In this paper, we discuss the developed algorithm and introduce some case histories on the application of anisotropic radar tomography in Korea. The first two case histories were conducted for the construction of infrastructure, and their main objective was to locate cavities in limestone. The last two were performed In a granite and gneiss area. The anisotropy in the granite area was caused by fine fissures aligned in the same direction, while that in the gneiss and limestone area by the alignment of the constituent minerals. Through these case histories we showed that the anisotropic characteristic itself gives us additional important information for understanding the internal status of basement rock. In particular, the anisotropy ratio defined by the normalized difference between maximum and minimum velocities as well as the direction of maximum velocity are helpful to interpret the borehole radar tomogram.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.5_6
• /
• pp.257-266
• /
• 2007

In On-Chip bus, the arbitration scheme is one of the critical factors that decide the overall system performance. The arbitration scheme used in traditional shared bus is the master-side arbitration based on the request and grant signals between multiple masters and single arbiter. In the case of the master-side arbitration, only one master and one slave can transfer the data at a time. Therefore the throughput of total bus system and the utilization of resources are decreased in the master-side arbitration. However in the slave-side arbitration, there is an arbiter at each slave port and the master just starts a transaction and waits for the slave response to proceed to the next transfer. Thus, the unit of arbitration can be a transaction or a transfer. Besides the throughput of total bus system and the utilization of resources are increased since the multiple masters can simultaneously perform transfers with independent slaves. In this paper, we implement and analyze the arbitration schemes for the Multi-Layer AHB BusMatrix based on the slave-side arbitration. We implement the slave-side arbitration schemes based on fixed priority, round robin and dynamic priority and accomplish the performance simulation to compare and analyze the performance of each arbitration scheme according to the characteristics of the master and slave. With the performance simulation, we observed that when there are few masters on critical path in a bus system, the arbitration scheme based on dynamic priority shows the maximum performance and in other cases, the arbitration scheme based on round robin shows the highest performance. In addition, the arbitration scheme with transaction based multiplexing shows higher performance than the same arbitration scheme with single transfer based switching in an application with frequent accesses to the long latency devices or memories such as SDRAM. The improvements of the arbitration scheme with transaction based multiplexing are 26%, 42% and 51%, respectively when the latency times of SDRAM are 1, 2 and 3 clock cycles.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.121-137
• /
• 2020

Data from the Ozone Monitoring Instrument (OMI) satellite and national emission inventories were used in this study to analyze air quality in East Asia and estimate the impact of domestic and foreign emissions on South Korea's air quality, based on which future emissions were predicted. The concentration trends of nitrogen dioxide (NO₂) and sulfur dioxide (SO₂) in East Asia from 2005 to 2015 showed that both substances were highest in North East China (NEC), followed by South East China (SEC) and Seoul Metropolitan Area (SMA). The average SO₂ concentration was 1.63 times higher in NEC than in SMA. Analysis on the ratios of NO₂/SO₂ and NO_x/SO_x provides an indirect picture of the effect of transboundary air pollutants on atmospheric composition in Korea. The concentration ratio of NO₂/SO₂ in all study areas peaked in 2013 and SMA's emission ratio of NO_x/SO_x increased in 2015 by over 22% from 2013. Despite the reduction in domestic emissions, the concentration-to-emission ratios (NO₂/NO_x, SO₂/SO_x) rose gradually, which implies that other factors besides domestic emissions (e.g., foreign sources, lifetime, etc.) influence air quality in SMA. We estimated future emissions of NO_x and SO_x in SMA to be 296.2 and 39.0 ktons in 2025 and 284.4 and 33.8 ktons in 2035, respectively. Application of the inter-comparison techniques of this study to the data from the Geostationary Environment Monitoring Instrument (GEMS) is expected to provide concrete information which can be used to improve national emission inventories and figure out factors and sources that affect domestic air quality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.555-559
• /
• 2012

Manures contain a variety of pathogenic microorganisms that pose a risk to human or animal. On-farm contaminations through contaminated manure were considered likely sources of the pathogen for several outbreak. Pathogenic microorganisms may survive in low numbers during the composting process and subsequently regrow to high levels under favorable conditions. The objective of this study was to investigate effect of temperature on survival of Salmonella enterica and Staphylococcus aureus in livestock manure compost. Commercial livestock manure compost (manure 60%, sawdust 40%) was inoculated with S. enterica and S. aureus. Compost was incubated at four different temperatures (10, 25, 35, and $55^{\circ}C$) for 20 weeks. Samples were taken every week during incubation depending on the given conditions. S. enterica persisted for up to 1 day in livestock manure compost at $55^{\circ}C$, over 140 days at $10^{\circ}C$, 140 days at $25^{\circ}C$, and 70 days at $35^{\circ}C$, respectively. S. aureus persisted for up to 1 day in livestock manure compost at $55^{\circ}C$ and 90 days at $10^{\circ}C$, 70 days at $25^{\circ}C$, and 40 days at $35^{\circ}C$, respectively. The results indicate that S. enterica and S. aureus persisted longer under low temperature condition. S. enterica survived longer than S. aureus at three different temperatures (10, 25, and $35^{\circ}C$). This study will provide useful and practical guidelines to applicators of soil in deciding appropriate handling and time frames for land application of livestock manure compost for sustainable agriculture. Results from these studies provide useful information in identifying manure handling practices to reduce the risk of S. enterica and S. aureus transmission to fresh produce.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.399-403
• /
• 2013

This study was conducted to investigate the basic concept of multiple trait effective daughter contribution (MTEDC) for dairy cattle sires and calculate effective daughter contribution (EDC) by applying a five lactation multiple trait model using milk yield test records of daughters for the Multiple-trait Across Country Evaluation (MACE). Milk yield data and pedigree information of 301,551 cows that were the progeny of 2,046 Korean and imported dairy bulls were collected from the National Agricultural Cooperative Federation and used in this study. For MTEDC approximation, the reliability of the breeding value was separated based on parents average, own yield deviation and mate adjusted progeny contribution. EDC was then calculated by lactation using these reliabilities. The average number of recorded daughters per sire by lactations were 140.57, 94.24, 55.14, 29.20 and 14.06 from the first to fifth lactation, respectively. However, the average EDC per sire by lactation using the five lactation multiple trait model was 113.49, 89.28, 73.56, 54.02 and 35.08 from the first to fifth lactation, respectively, while the decrease of EDC in late lactations was comparably lower than the average number of recorded daughters per sire. These findings indicate that the availability of daughters without late lactation records is increased by genetic correlation using the multiple trait model. Owing to the relatedness between the EDC and reliability of the estimated breeding value for sire, understanding the MTEDC algorithm and continuous monitoring of EDC is required for correct MACE application of the five lactation multiple trait model.

• Science of Emotion and Sensibility
• /
• v.15 no.4
• /
• pp.553-564
• /
• 2012

Tangible user interfaces have been developed in the area of Human-Computer Interaction for the last decades, however, the applied domains recently have been extended into the product design and interactive art. Tangible User Interfaces are the combination of digital information and physical objects or environments, thus they provide tangible and intuitive interaction as input and output devices, often combined with Augmented Reality. The research developed a design guideline for tangible user interfaces based on key properties of tangible user interfaces defined previously in five representative research: Tangible Interaction, Intuitiveness and Convenience, Expressive Representation, Context-aware and Spatial Interaction, and Social Interaction. Using the guideline emphasizing user interaction, this research evaluated installation in a science museum in terms of the applied characteristics of tangible user interfaces. The selected 15 installations which were evaluated are to educate visitors for science by emphasizing manipulation and experience of interfaces in those installations. According to the input devices, they are categorized into four Types. TUI properties in Type 3 installation, which uses body motions for interaction, shows the highest score, where items for context-aware and spatial interaction were highly rated. The context-aware and spatial interaction have been recently emphasized as extended properties of tangible user interfaces. The major type of installation in the science museum is equipped with buttons and joysticks for physical manipulation, thus multimodal interfaces utilizing visual, aural, tactile senses etc need to be developed to provide more innovative interaction. Further, more installation need to be reconfigurable for embodied interaction between users and the interactive space. The proposed design guideline can specify the characteristics of tangible user interfaces, thus this research can be a basis for the development and application of installation involving more TUI properties in future.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2017

For more efficient and proactive safety control of imported food, new trend in U.S. is emerging, which assesses the food safety control systems of exporting countries using Systems Recognition Assessment Tool and helps ensure safety of imported foods. This study examines trends in development and application of assessmemnt tool and country assessment reports in U.S. where an active discussion on this issue is in progress. The expert interviews were also conducted. U.S. Systems Recognition Assessment Tool was developed by FDA to recognize the potential value in leveraging the expertise of foreign food safety systems and help ensure safety of imported food. The tool is comprised of ten standards and provides an objective framework for determining the robustness of trading partners' overall food safety systems. Using its own tool, the U.S. FDA conducted a preliminary assessment of the food safety control systems of New Zealand and Canada. According to the U.S.-New Zealand and the U.S.-Canada assessment reports, the overall structure of the systems was similar between the countries. In summarizing the opinions of experts, such a trend in National Food Safety Control System Assessment may be utilized in the sanitary assessment and the control of imported food border inspection frequency before importing food. It would contribute to more effective distribution of national budget and increased public trust. Additionally, international collaboration as well as securing of qualified experts and sufficient budget appear to be crucial to further increase the utility of National Food Safety Control Systems Assessment. In conclusion, firstly, it is critically important for the competent authority of South Korea to proactively respond to international trend in National Food Safety Control System Assessment by identifying the details of its background, assessment purpose, core assessment elements, and assessment procedures. Secondly, it is necessary to identify and complement the weaknesses of Korea's food safety control system by reviewing it with U.S. Systems Recognition Assessment Tool. Thirdly, by adapting the assessment results from imported countries' food safety control systems to the imported food inspection intensity, the resources previously used in inspecting the imported food from accredited countries can be redistributed to inspecting the imported food from unaccredited countries, and it would contribute to more efficient imported food safety control. Fourthly, the competent authority of South Korea should also consider developing its own assessment tool designed to reflect the unique characteristics of its food safety control system and international guidelines.