• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.583-586
• /
• 2002

Molding properties of etched surface pattern are presented. Specimens, whose surface patterns are made by print-type etching, are investigated. The molding properties of surface pattern are estimated with roughness deviation of surface pattern on part and mold. The etching properties are related to physical properties of plastic materials and surface roughness of etched pattern. Also, flow mark and gate location can give influence on surface pattern molding. The experimental result can contribute to good molding of surface pattern in injection molding.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.291-292
• /
• 2010

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2005년도 추계학술발표회 및 workshop
• /
• pp.152-152
• /
• 2005

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2005년도 추계학술발표회 및 workshop
• /
• pp.153-153
• /
• 2005

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.150-150
• /
• 2008

• Structural Engineering and Mechanics
• /
• 제20권3호
• /
• pp.279-292
• /
• 2005

In this study, element loading matrices are defined for static application of classical M$\ddot{u}$ller-Breslau principle to finite element method. The loading matrices are derived from existing element matrices using Betti's law and known governing equations of F.E.M. Thus, the ordinates of influence lines and influence surfaces may be easily obtained from structural analysis for the loading matrices derived from governing equations, instead of through introduced unit force or displacement techniques. An algorithm for a computer program and comparative numerical examples are also presented to illustrate the procedure for determination of influence line and surface ordinates.

• 비파괴검사학회지
• /
• 제16권3호
• /
• pp.184-191
• /
• 1996

본 연구의 목적은 선반 작업에 있어서 공구 형상과 작업 조건 변화에 대한 표면 거칠기 곡선의 형성 인자를 규명하기 위한 것이다. SNMG120404, SNMG120408과 DNMG150404, DNMG150408의 공구가 사용되었고, 절삭 속도와 이송의 작업 조건이 변화되었다. 즉, 절삭 속도는 150, 200, 250 m/min, 이송은 0.05, 0.1, 0.3mm/rev으로 변화시켰다. 주파수 분석 결과에 의하면, 표면 거칠기는 이송에 가장 큰 영향을 받았다. 또한 바이트의 떨림은 표면 거칠기뿐만 아니라 파상도에도 영향을 마치고 있었다. 아울러 이송이 감소할수록 표면 거칠기에 미치는 영향이 증가함을 알았다. 끝으로, 정상적인 경우의 주축 떨림은 표면 거칠기에 거의 영향을 미치지 않았으며, 공구 형상은 표면 거칠기 곡선 형성 인자의 생성 변수가 되지 않는다.

• 비파괴검사학회지
• /
• 제11권2호
• /
• pp.32-41
• /
• 1991

This paper is to analyze the surface roughness in wet and dry surface grinding in which working conditions are table feed, cross feed and down feed. FFT analyzer is used to identify the surface roughness and the data of surface roughness are stored and displayed using an interfaced computer. In results, components affecting surface roughness exist within 200Hz with respect the conditions and methods of grinding operation. Also, with increase of table feed, cross feed and down feed, the value of surface roughness increases. Of them, cross feed has first influence on surface roughness. In dry, preciser surface can be obtained than one in wet.

• 한국정밀공학회지
• /
• 제1권2호
• /
• pp.24-32
• /
• 1984

The object of the study is to discuss the effect of magic ink as a surface active substance on the mechanism of chip formation in oblique cutting. The Rehbinder effect has been known as a phenomenon that the mechanical strength reduces when the metal is coated with some surface active substances. In order to interpret these surface effects defined by Rehbinder, the influence on the shear strength of shear plane by coating surface active substances, cutting force by the depth of cut, surface roughness and hardness ratio were observed. The results are as follows: 1. By coating the magic ink on free surface of the forming chip, the effective shear angle increases, and the cuttinbg force and the deformed chip thickness decreases. 2. With the large inclination angle the effective shear angle increases, and the specific cutting force and the friction angle decrease. 3. Cutting of the coated surface improves the surface roughness and the hardness ratio drops, which means another Rehbinder effect.

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.15-22
• /
• 2000

The objective of this study is to investigate the degree of surface-glossing of flowing concrete, varying with W/C, types of forms and form oils. According to the experimental results, the degree of surface-glossing of flowing concrete is turned out to be higher than that of base concrete, as the slump increases. The degree of surface-glossing of concrete with 40% of W/C is higher than that with 50%. The orders of degree of surface-glossing with the types of forms are as follows : acryle > fancy plywood > metal form > plywood. When water solution type form oil is applied to the surface of forms, we can achieve higher degree of surface-glossing. It shows that the degree of surface-glossing decreases with elapsed time.