• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.6
• /
• pp.727-737
• /
• 2010

Together with the Young's modulus the Poisson's ratio is another independent material parameter that governs the behavior of a structural system. Therefore, it is meaningful to evaluate separately the influence of the parameter on the random response of the structural system. To this end, a formulation dealing with the spatial randomness in the Poisson's ratio in laminated composite plates is proposed. The main idea of the paper is to transform the fraction form of the constitutive coefficients into the expanded form in an ascending order of the stochastic field function. To validate the adequacy of the formulation, a square plate is chosen and the computation results are compared with those obtained using conventional Monte Carlo simulation. It is observed that the results show good agreement with those by the Monte Carlo simulation(MCS).

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.365-372
• /
• 2010

This paper was to evaluate the influence of kiln process parameter(kiln angle, kiln rotating speed) of lightweight aggregate using waste glass and bottom ash with industrial by-products on thermal conductivity, density, water absorption, fracture load and porosity by response surface analysis. In the results of surface plot and contour plot, it has verified that kiln residence time of lightweight aggregate increase as kiln angle and rotating speed decreases. For this reason, pore size and quantity tend to increase by active reaction of forming agent. It seems to be that increase in pore size and quantity have caused decreasing density, fracture load and thermal conductivity, and increasing water absorption. In conclusion, optimization of kiln process parameter on thermal conductivity, density, water absorption, fracture load and porosity by response surface analysis are kiln angle 2.4646%, kiln rotating speed 40.7089 rpm.

• Structural Engineering and Mechanics
• /
• v.48 no.3
• /
• pp.415-434
• /
• 2013

This work is concerned with transverse vibrations of axially traveling nanobeams including strain gradient and thermal effects. The strain gradient elasticity theory and the temperature field are taken into consideration. A new higher-order differential equation of motion is derived from the variational principle and the corresponding higher-order non-classical boundary conditions including simple, clamped, cantilevered supports and their higher-order "offspring" are established. Effects of strain gradient nanoscale parameter, temperature change, shape parameter and axial traction on the natural frequencies are presented and discussed through some numerical examples. It is concluded that the factors mentioned above significantly influence the dynamic behaviors of an axially traveling nanobeam. In particular, the strain gradient effect tends to induce higher vibration frequencies as compared to an axially traveling macro beams based on the classical vibration theory without strain gradient effect.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.2 s.21
• /
• pp.77-87
• /
• 2005

The thermomechanical characteristics were evaluated for 17-4PH stainless steel widely used in supersonic airframe subjected to both aerodynamic loading and heating. The thermomechanical tests were conducted under both elevated temperature and rapid heating condition from $1^{\circ}C/sec\;to\;28^{\circ}C/sec$. The thermomechanical behaviors under rapid heating were compared with those of elevated temperature after 1/2 hour exposure in terms of yield stress to investigate the influence of heating rates. A heating rate-yield temperature parameter was suggested for rapid heating based on time-temperature parameters, and master yield stress curve was obtained by using these parameters. The experimental results and methodology from this study can be used as basic engineering data when designing supersonic vehicle structures subjected to aerodynamic loading and severe heating environment.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.889-896
• /
• 2008

A suitable simple model tested by experiments is required to address complex biological reactions like esterase synthesis by Saccharomyces cerevisiae. Such an approach might be the answer to a proper bioprocessing strategy. In this regard, a logistic model for esterase production from Saccharomyces cerevisiae has been developed, which predicts well the cell mass, the carbon source (glucose) consumption, and the esterase activity. The accuracy of the model has been statistically examined by using the Student's t-test. The parameter sensitivity analysis showed that all five parameters (${\mu}_m$, $K_a$, $X_m$, $Y_{x/s}$, and $Y_{p/x}$) have significant influence on the predicted values of esterase activity.

• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.75-84
• /
• 2007

This paper presents a closed-form model for evaluating the restraint effect of pressure induced bending on the opening of a circumferential through-wall crack, which is considered plastic deformation behavior. Three-dimensional finite element analyses with different crack lengths, restraint conditions, pipe geometries, magnitudes of internal pressure, and tensile properties were used to investigate the influence of each parameter on the pressure-induced bending restraint on the crack opening displacement. From these investigations, an analytical model based on elastic-perfectly plastic material was developed in terms of the crack length, symmetric restraint length, mean radius to thickness ratio, axial stress corresponding to the internal pressure, and normalized crack opening displacement evaluated from a linear-elastic crack opening condition. Finite element analyses results demonstrate that the proposed analytical model reliably estimated the restraint effect of pressure-induced bending on the plastic crack opening of a circumferential through-wall crack and properly reflected the dependence on each parameter within the range over which the analytical expression was derived.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.2
• /
• pp.57-68
• /
• 1991

In this study, to analyse the dynamic characteristics of a machine-tool spindle system, the spindle is mathematically represented by a Timoshenko beam including the internal damping of beam material, and each bearing by four bearing coefficients; stiffness and damping coefficients in moment and radial directions. And the dynamic compliance of the system is calculated by introducing the transfer matrix method, and the complex modal analysis method has been applied for the modal parameter identification. The influence of the bearing coefficients, material damping factor and bearing span on the dynamic characteristics of the system is parametrically examined.

• Advances in nano research
• /
• v.8 no.1
• /
• pp.49-58
• /
• 2020

This paper investigates the vibration characteristics of flexoelectric nanobeams resting on viscoelastic foundation and subjected to magneto-electro-viscoelastic-hygro-thermal (MEVHT) loading. In this regard, the Nonlocal strain gradient elasticity theory (NSGET) is employed. The proposed formulation accommodates the nonlocal stress and strain gradient parameter along with the flexoelectric coefficient to accurately predict the frequencies. Further, with the aid of Hamilton's principle the governing differential equations are derived which are then solved through Galerkin-based approach. The variation of the natural frequency of MEVHT nanobeams under the influence of various parameters such as the nonlocal strain gradient parameter, different field loads, power-law exponent and slenderness ratio are also investigated.

• Structural Engineering and Mechanics
• /
• v.10 no.2
• /
• pp.111-123
• /
• 2000

An asymptotic solution for snap-through buckling of single-layer squarely-reticulated shallow spherical shells continuously supported on springs is developed in this paper. Based on the fundamental governing equations and boundary conditions, a nondimensional analytical expression associated with the external load, stiffness of spring and central transverse displacement (deflection) is derived with the aid of asymptotic iteration method. The effects of stiffness of spring and characteristic geometrical parameter on buckling of the structures are given by the analyses of numerical examples. In a special case, for reticulated circular plates, the influence of stiffness of spring on the characteristic relation between load and deflection is also demonstrated.

• Nuclear Engineering and Technology
• /
• v.7 no.2
• /
• pp.119-126
• /
• 1975

On the assumption that the spectral distribution of prompt fission neutrons released from supercritical accidents can be expressed by the generalized Cranberg form with two spectral parameters, which is then transformed into the single parameter form, a variation of the fission spectrum-averaged cross-sections for some threshold reactions with varying the spectral parameter has teen calculated using an electronic computer. It appears that the average cross-sections are very sensitive to the spectral deformation, especially those for the detectors having the threshold at high neutron energy are high compared to those for the detectors of which the threshold energies are comparatively low.