• 제목/요약/키워드: influence parameter

검색결과 1,303건 처리시간 0.025초

Lubrication phenomenon in the stagnation point flow of Walters-B nanofluid

  • Muhammad Taj;Manzoor Ahmad;Mohamed A. Khadimallah;Saima Akram;Muzamal Hussain;Madeeha Tahir;Faisal Mehmood Butt;Abdelouahed Tounsi
    • Advances in concrete construction
    • /
    • 제15권5호
    • /
    • pp.303-312
    • /
    • 2023
  • The present study investigates the effects of Cattaneo-Christov thermal effects of stagnation point in Walters-B nanofluid flow through lubrication of power-law fluid by taking the slip at the interfacial condition. For the solution, the governing partial differential equation is transformed into a series of non-linear ordinary differential equations. With the help of hybrid homotopy analysis method; that consists of both the homotopy analysis and shooting method these equations can be solved. The influence of different involved constraints on quantities of interest are sketched and discussed. The viscoelastic parameter, slip parameters on velocity component and temperature are analyzed. The velocity varies by increase in viscoelastic parameter in the presence of slip parameter. The slip on the surface has major effect and mask the effect of stagnation point for whole slip condition and throughout the surface velocity remained same. Matched the present solution with previously published data and observed good agreement. It can be seen that the slip effects dominates the effects of free stream and for the large values of viscoelastic parameter the temperature as well as the concentration profile both decreases.

Analysis and Remedy of TFT Based Current Mode Logic Circuit Performance Degradation due to Device Parameter Fluctuation

  • Lee, Joon-Chang;Jeong, Ju-Young
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.535-538
    • /
    • 2005
  • We report the influence of the threshold voltage and mobility fluctuation in TFT on current mode digital circuit performance. We found that the threshold voltage showed more serious circuit malfunction. We studied new circuit configuration for improvement.

  • PDF

The Effect of First Observation in Panel Regression Model with Serially Correlated Error Components

  • Song, Seuck-Heun
    • Communications for Statistical Applications and Methods
    • /
    • 제6권3호
    • /
    • pp.667-676
    • /
    • 1999
  • We investigate the effects of omission of initial observations in each individuals in the panel data regression model when the disturbances follow a serially correlated one way error components. We show that the first transformed observation can have a relative large hat matrix diagonal component and a large influence on parameter estimates when the correlation coefficient is large in absolute value.

  • PDF

A Modified Two-Parameter Solution for Crack-Tip Field in Bending Dominated Specimens

  • Jang Seok-Ki;Zhu Xian Kui
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제30권4호
    • /
    • pp.494-504
    • /
    • 2006
  • It is well known that the two-parameter $J-A_2$ solution can well characterize the crack-tip fields and quantify the crack-tip constraint for different flawed geometries in variety of loading conditions. However, this solution fails to do so for bending dominated specimens or geometries at large deformation because of the influence of significant global bending stress on the crack-tip field. To solve this issue, a modified $J-A_2$ solution is developed in this paper by introducing an additional term to address the global bending influence. Using the $J_2$ flow theory of plasticity and within the small-strain framework detailed finite element analyses are carried out for the single edge notched bend (SENB) specimen with a deep crack in A533B steel at different deformation levels ranging from small-scale Yielding to large-scale Yielding conditions. The numerical results of the crack-tip stress field are then compared with those determined from the $J-A_2$ solution and from the modified $J-A_2$ solution at the same level of applied loading Results indicate that the modified $J-A_2$ solution largely improves the $J-A_2$ solution, and match very well with the numerical results in the region of interest at all deformation levels. Therefore, the proposed solution can effectively describe the crack-tip field and the constraint for bending dominated specimens or geometries.

자동차용 강판의 표면 마찰 특성에 대한 접촉 압력의 영향 (Contact Pressure Effect on Frictional Behavior of Sheet Steel for Automotive Stamping)

  • 한수식
    • 소성∙가공
    • /
    • 제20권2호
    • /
    • pp.99-103
    • /
    • 2011
  • Many parameters influence the frictional behavior of steel sheet during stamping. The contact pressure between a die and a sheet during stamping is one of them. Thus, this parameter is investigated for high strength steel (HSS) sheets, which are widely used for auto body panels due to their potential for weight reduction. Since HSS extend the limits of contact pressure for mild steel, the effect of this parameter on friction cannot be ignored. To investigate the influence of contact pressure on the frictional behavior of steel sheets, a flat type of friction test was conducted on three different steel sheets under various contact pressures. For bare steel sheets, the curve representing the relationship between contact pressure and friction coefficient exhibits a U shape. Coated steel sheets show a similar tendency except at low contact pressure. For these materials, when the contact pressure is very low, the friction coefficient slightly increases with pressure before it starts to decrease. The test results show that the effect of contact pressure on frictional behavior of steel sheet is not negligible even for contact pressures that are lower than the strength of HSS sheet.

부정적 언론보도에 대한 베이커리 소비자의 심리적 위험지각과 브랜드태도 연구 (A Research on the psychological risk recognition and Brand Attitude of Bakery Consumers on Negative Media Report)

  • 정순화;한경수
    • 한국생활과학회지
    • /
    • 제24권4호
    • /
    • pp.513-529
    • /
    • 2015
  • This study performed corroborative analysis by establishing hypothesis so as to corroboratively define the effect on brand attitude of psychological risk recognition in the case where consumers reading negative media news related to bakery recognize crisis communication on the basis of which point. According to corroborative analysis, the role of psychological crisis perception as parameter is confirmed in the causal relation between crisis communication recognition and brand attitude. Such result of study confirms that the positive change in crisis communication recognition reduces psychological risk perception to bakery products and such psychological risk perception eventually become factor which affects brand attitude over products. Such result of study suggests that when reading negative media news on bakery, the influence on consumer's evaluation of news on the basis of certain point and the influence on the formation of causal relation between psychological risk perception and brand attitude has scientific ground. In the aspect, the main result of this study is to find the clue that when comparing precedent study between crisis communication recognition and brand attitude, psychological risk perception is realized with brand attitude as media by verifying the parameter role of psychological risk perception.

대칭 및 비대칭 binary filter가 수차를 포함한 광학계의 축상 GAIN에 미치는 영향

  • 최기준;정창섭;심상현
    • 한국광학회지
    • /
    • 제12권3호
    • /
    • pp.165-171
    • /
    • 2001
  • 본 논문은 annular binary filter로 진폭 변조된 일반광학계와 공초점계에 구면 수차와 코미가 존재할 때 축상 PSF, GAIN을 계산하였다. 고려한 동의 형태는 진폭이 1인 0~r$_1$의 안쪽 환형과 r~1의 바깥쪽 환형으로 구성되어있고, 두 환형의 면적이 같을때와 다를 때 두가지 경우에 대해 고려하였다. 면적이 같을때를 대칭(symmetry), 다를 때를 비대칭(asymmetry)이라 하여 asymmetry parameter $\varepsilon$를 도입하였다. 동의 반경을 1로 규격화한 개구면에서 obstruction parameter $\mu$에 따라 변조폭을 고려하여 일반광학계와 공초점계에 대한 축상 PSF를 계산하였고 축상에서 superresolution을 살펴보기 위해서 GAIN을 정의 하여 $\mu$에 따른 GAIN을 구하였다 특히 일반광학계에 구면수차가 존재할 때 축상 PSF를 수식적으로 전개하였다.

  • PDF

순환기 기능 조절기능을 가진 신경내분비계 작용물질이 참굴의 심장 수축기능에 미치는 영향 (Effects of Cardiovascularly Acting Neuroendocrine Agents on Heart Beatings of Pacific Oyster, Crassostrea gigas)

  • 박관하
    • 한국패류학회지
    • /
    • 제25권1호
    • /
    • pp.15-22
    • /
    • 2009
  • Because it is known that bivalve hearts contain various modulatory systems activated by neuroendocrine substances, it was examined whether different classes of endogenous and synthetic drugs of neuroendocrinological importance can influence cardiac functions of the Pacific oyster Crassostrea gigas. Cholinergically active agents acetylcholine and carbachol increased heart rates while diminishing cardiac contractility. Adrenergically active substances norepinephrine (NE) and epinephrine (Epi) also induced heart rate increase and contractility decrease. An $\alpha_1$-adrenergic receptor-selective agonist phenyephrine (PE) failed to modulate either parameter. The Epi-induced heart rate increase and contractile depression were both blocked significantly by non-selective $\beta_1/\beta_2$-adrenergic antagonist propranolol. A $\beta_1$-selective antagonist atenolol prevented Epi-induced heart rate decrease but not the contractile depression, suggesting possible $\beta_2$ receptors for Epi-induced contractile depression. The three autacoids examined exerted discrete responses: histamine increased heart rate and depressed contraction; $\gamma$-amino-butyric acid increased both parameters; serotonin failed to change either parameter. The 5 piscine anesthetic agents examined, MS-222, benzocaine, quinaldine, urethane, pantocaine and pentobarbital, all failed to influence the cardiac function of oysters. Collectively, activities of neuroendocrinologically acting agents in mammals showed unexpected and distinct activities from those in mammalian cardiovascular systems. These results obtained from substances of different physiological functions can serve as a basis for understanding neuroendocrine control of the heart function in Pacific oyster.

  • PDF

Fatigue study on additional cutout between U shaped rib and floorbeam in orthotropic bridge deck

  • Ju, Xiaochen;Zeng, Zhibin;Zhao, Xinxin;Liu, Xiaoguang
    • Steel and Composite Structures
    • /
    • 제28권3호
    • /
    • pp.319-329
    • /
    • 2018
  • The field around additional cutout of the floor beam web in orthotropic bridge deck was subjected to high stress concentration, especially the weld toe between floor beam and U shaped rib and the free edge of the additional cutout. Based on different considerations, different geometrical parameters of additional cutout were proposed in European, American and Japanese specifications, and there remained remarkable differences among them. In this study, considering influence of out-of-plane deformation of floor beam web and U shaped rib, parameter analysis for additional cutout under typical load cases was performed by fine finite element method. The influence of additional cutout shape and height to the stress distribution around the additional cutout were investigated and analyzed. Meanwhile, the static and fatigue test on this structure details was carried out. The stress distribution was consistent with the finite element analysis results. The fatigue property for additional cutout height of 95mm was slightly better than that of 61.5 mm.