• 제목/요약/키워드: inflow pattern

검색결과 146건 처리시간 0.026초

분진 유입 방식에 따른 세라믹 캔들 필터 집진장치의 집진 및 탈진 특성 비교 연구 (Comparison Research of Filtration and Regeneration Characteristics of Ceramic Candle Filter System at Different Inflow Pattern of Dusty Gas)

  • 박석주;임경수;임정환
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 춘계학술대회 논문집
    • /
    • pp.341-344
    • /
    • 2008
  • Computational studies have been performed to analyze the particle loadings onto the filters according to the different inflow pattern of dusty gas and the flow uniformities on the filter surface of back-blown gas at different permeability of porous media setup at the filter outlet. This is preliminary study to find how we can reduce the regeneration time and improve the regeneration efficiency of filters with dust layer.

  • PDF

정지궤도 인공위성 추진시스템의 온도변화를 통한 배관내 가압제 유입 예측기법 연구 (The Study of Pressurant Inflow Prediction Using Temperature Change of Geostationary Satellite Propellant System)

  • 박응식;전형렬;박봉규;한조영;최성봉;김용민
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2005년도 춘계 학술대회논문집
    • /
    • pp.96-99
    • /
    • 2005
  • The geostationary satellite propulsion system has thermistors which can measure liquid propellant temperature at tanks, pipes and etc. In the satellite propulsion system with several tanks, the propellant in the tanks is moved by temperature change and this temperature pattern is constant. In this paper, the temperature change pattern of KOREASAT 1 propulsion system is compared and the prediction study of pressurant inflow using temperature change of geostationary satellite propulsion system is described.

  • PDF

가스 유입 방식에 따른 집진장치 내에서의 세라믹 캔들 필터로의 입자 부하 특성 비교 (Comparison of Particle Loading Characteristics onto Ceramic Candle Filters in Filtration System at Different Gas Inflow Pattern)

  • 박석주;임정환;임경수
    • Korean Chemical Engineering Research
    • /
    • 제46권5호
    • /
    • pp.983-987
    • /
    • 2008
  • IGCC 파일럿 플랜트의 집진시스템을 최적 설계하기 위하여 수치해석을 수행하였다. 서로 다른 가스 유입 방식이 집진용기 내부의 유체 유동장과 입자 거동에 미치는 영향을 분석하였다. 필터 표면에 전달되는 입자의 부하율은 분진입자가 혼합된 가스가 내부에 차단관이 설치된 집진용기의 외벽에 접하게 설치된 접선 유입구를 따라 집진용기 내로 유입되는 경우 아주 낮았으며, 입자크기가 클수록 입자부하율은 급격히 감소하였다. 이에 반하여, 가스 유동이 집진용기의 필터지지판 중앙에 수직하게 설치된 수직 유입구를 통하여 집진용기 내로 유입되는 경우, 필터 표면으로의 입자 부하율이 아주 높았으며, 입자크기 증가에 따른 입자부하율의 감소는 접선 유입 방식에 비하여 크지 않았다.

소양호에서 외부기원유기물의 유입, 유출 특성 (Characteristics of Allochthonous Organic Matter in Large Dam Reservoir, Lake Soyang)

  • 박혜경;권오윤;정동일
    • 한국물환경학회지
    • /
    • 제27권1호
    • /
    • pp.88-97
    • /
    • 2011
  • To identify the inflow and outflow characteristics of allchthonous organic matters and examine the change of allochthonous organic matter load pattern due to the climate change, we investigated the temporal variations of DOC and POC concentrations within inflow water and dam discharge water and spatio-temporal distribution of POM within the lake water in Lake Soyang which is the largest dam reservoir in Korea in 2006. Most of allochthonous DOC flowed into the lake water during initial rain and was not affected by the amount of precipitation, whereas most of allochthonous POC flowed into during concentrated heavy rain and the concentration of POC was significantly associated with the amount of inflow water and precipitation. Calculated annual allochthonous organic matter loads in Lake Soyang from 2003 to 2006 using the regression equation between the amount of inflow water and the concentration of POC indicate allochthonous organic matter loads are mainly affected by total influx and extreme influx of inflow water. The spatio-temporal distribution of POM indicated allochthonous organic matter of inflow river during flood period in July transported from upper part to middle and lower part of the lake a month later respectively along the middle layer of water column in Lake Soyang.

정지궤도위성 추진시스템 온도추이를 통한 위성폐기 가능시점 연구

  • 박응식;한조영
    • 항공우주기술
    • /
    • 제4권2호
    • /
    • pp.94-100
    • /
    • 2005
  • 정지궤도 인공위성의 추진시스템은 각 탱크 및 배관, 주요 핵심부분 등에 온도를 측정할 수 있는 온도센서를 장착하고 있다. 또한 추진시스템 내에 다수의 탱크가 장착될 경우 온도변화에 따라 탱크내 추진제가 이동하는 열펌핑 현상이 발생하고 이때 온도변화는 일정한 경향을 갖는다. 본 논문에서는 무궁화위성 1호 추진시스템의 온도변화를 분석하고 이를 통하여 배관내에 가압제의 유입시기를 추정하고 위성폐기 시점을 추정하고자 한다.

  • PDF

Attention 기법을 적용한 LSTM-s2s 모델 기반 댐유입량 예측 연구 (Prediction of dam inflow based on LSTM-s2s model using luong attention)

  • 이종혁;최수연;김연주
    • 한국수자원학회논문집
    • /
    • 제55권7호
    • /
    • pp.495-504
    • /
    • 2022
  • 최근 인공지능의 발전으로 시계열 자료 분석에 효과적인 Long Short-Term Memory (LSTM) 모델이 댐유입량 예측의 정확도를 높이는 데 활용되고 있다. 본 연구에서는 그 중 LSTM의 성능을 더욱 향상할 수 있는 Sequence-to-Sequence (s2s) 구조에 Attention 기법을 LSTM 모델에 첨가하여 소양강댐 유역의 유입량을 예측하였다. 분석 데이터는 2013년부터 2020년까지의 유입량 시자료와 종관기상관측기온 및 강수량 자료를 학습, 검증, 평가로 나누어 훈련한 후, 모델의 성능 평가를 진행하였다. 분석 결과, LSTM-s2s 모델보다 attention까지 첨가한 모델이 일반적으로 더 좋은 성능을 보였으며, attention 첨가 모델이 첨두값도 더 잘 예측하는 모습을 보였다. 그리고 두 모델 모두 첨두값 발생 동안 유량 패턴을 잘 반영하였지만 세밀한 시간 단위 변화량에는 어려움이 있었다. 이를 통해 시간 단위 예측의 어려움에도 불구하고, LSTM-s2s에 attention까지 첨가한 모델이 기존 LSTM-s2s의 예측 성능을 향상할 수 있음을 알 수 있었다.

팔당호 상류 유입하천의 수질 및 식물플랑크톤 분포 패턴 (Water Quality and Phytoplankton Distribution Pattern in Upper Inflow Rivers of Lake Paldang)

  • 박혜경;변명섭;김은경;이현주;전명진;정동일
    • 한국물환경학회지
    • /
    • 제20권6호
    • /
    • pp.615-624
    • /
    • 2004
  • The distribution pattern of water quality parameters and phytoplankton biomass in upper inflow rivers of lake Paldang had surveyed. In North-Han river system, nutrient concentrations and algal biomass was below the standard of mesoand oligotrophy from lake Soyang to lake Paldang, maintaining good water quality, except the N5 site located near the Chuncheon-Si, showing high nutrients concentrations and algal biomass. The algal biomass of the South-Han river system showed oligotrophic level in the upstream near the lake Chungju, and increased along the flow direction showing eutrophic level in the downstream within the lake Paldang area. On the other hand, the highest concentrations of nutrients were detected in the middle stream near the Yeoju-Si and Yangpyung-Gun rather than in the downstream suggesting algal biomass in lake Paldang would not come from the upper river area but come from the growth within the lake area using nutrients from the upper inflow river.

Wall Shear Stress and Flow Patterns in Unruptured and Ruptured Anterior Communicating Artery Aneurysms Using Computational Fluid Dynamics

  • Lee, Ui Yun;Jung, Jinmu;Kwak, Hyo Sung;Lee, Dong Hwan;Chung, Gyung Ho;Park, Jung Soo;Koh, Eun Jeong
    • Journal of Korean Neurosurgical Society
    • /
    • 제61권6호
    • /
    • pp.689-699
    • /
    • 2018
  • Objective : The goal of this study was to compare several parameters, including wall shear stress (WSS) and flow pattern, between unruptured and ruptured anterior communicating artery (ACoA) aneurysms using patient-specific aneurysm geometry. Methods : In total, 18 unruptured and 24 ruptured aneurysms were analyzed using computational fluid dynamics (CFD) models. Minimal, average, and maximal wall shear stress were calculated based on CFD simulations. Aneurysm height, ostium diameter, aspect ratio, and area of aneurysm were measured. Aneurysms were classified according to flow complexity (simple or complex) and inflow jet (concentrated or diffused). Statistical analyses were performed to ascertain differences between the aneurysm groups. Results : Average wall shear stress of the ruptured group was greater than that of the unruptured group (9.42% for aneurysm and 10.38% for ostium). The average area of ruptured aneurysms was 31.22% larger than unruptured aneurysms. Simple flow was observed in 14 of 18 (78%) unruptured aneurysms, while all ruptured aneurysms had complex flow (p<0.001). Ruptured aneurysms were more likely to have a concentrated inflow jet (63%), while unruptured aneurysms predominantly had a diffused inflow jet (83%, p=0.004). Conclusion : Ruptured aneurysms tended to have a larger geometric size and greater WSS compared to unruptured aneurysms, but the difference was not statistically significant. Flow complexity and inflow jet were significantly different between unruptured and ruptured ACoA aneurysms.

FLDWAV 모형을 이용한 하천합류부에서의 수리학적 특성 연구 (A Study on the Hydraulic Characteristics of River Junctions Using FLDWAV Model)

  • 조현경
    • 한국산업융합학회 논문집
    • /
    • 제10권4호
    • /
    • pp.275-283
    • /
    • 2007
  • This study aims at the calculation of a variation of flow characteristics of main channel for tributary inflow in river junction. So this study was analyzed the variation of flow depth and velocity in main channel for a change of inflow degree. For this purpose, FLDWAV model are carried out for variations of $30^{\circ}$, $60^{\circ}$ and $90^{\circ}$ tributary inflow at junction. Results show that velocity ratio(V1/V3) increases and flow depth ratio(H1/H3) decreases for discharge ratio(Q1/Q3) of upstream and downstream when degree increases in junction. And FLDWAV model was applied at a real river junctions. Selected area is a junction of Gumho river and Sin stream. Results show that pattern is similar to a virtual channel.

  • PDF