• 한국주조공학회지
• /
• 제20권4호
• /
• pp.254-259
• /
• 2000

Metal matrix composites(MMCs) reinforced with hard particles have many potential application in aerospace structures, auto parts, semiconductor package, heat resistant panels, wear resistant materials and so on. In this work, the effect of SiC partioel sizes(50 and 100 ${\mu}m$) and additional elements such as Si, Cu and Ti on the microstructure and the wear property of $Al-5Mg-X(Si,Cu,Ti)/SiC_p$ composites produced by pressureless infiltration method have been investigated using optical microscopy, scanning eletron microcopy(SEM) with EDS(energy dispersive spectrometry), hardness test, X-ray diffractometer(XRD) and wear test. In present study, the sound $Al-5Mg-X(Si,Cu,Ti)/SiC_p$(50 and 100 ${\mu}m$) composites were fabricated by pressureless infiltration method. The $Al-5Mg-0.3Si-O.1Cu-O.1Ti/SiC_p$ composite with $50 {\mu}m$ size of SiC particle has higher hardness and better wear property than any other composite with $100{\mu}m$ size of SiC particle produced by pressureless infiltration method. The hardness and wear property of $Al-5Mg/SiC_p$(50 and 100 ${\mu}m$) composites were enhanced by the addition of Si, Cu and Ti in Al-5%Mg matrix alloy.

• 한국지반공학회논문집
• /
• 제22권7호
• /
• pp.55-64
• /
• 2006

풍화 사면은 지속적인 강우로 인하여 얕은층에서 파괴가 일어나고 있다. 이러한 파괴들은 주로 강우 침투로 지표면에서의 습윤대의 형성과 이로 인한 흡수력의 감소에 기인한다. 본 연구에서는 대표적인 풍화사면인 화강 풍화토 및 편마풍화토에 대한 함수특성곡선의 건조-습윤 이력과 선행강우 조건을 활용하여 시간에 따른 불포화 침투 해석을 인공적인 강우 강도와 지속시간을 설정하여 실시하였다. 그 결과 풍화 사면의 불포화 침투는 깊이별로 선행 강우에 의한 초기 흡수력과 이력에 따른 불포화 투수계수에 많은 영향을 받는 것으로 나타났다. 또한 화강풍화토가 편마풍화토 보다 상대적으로 작은 공기 함입값, 잔류 흡수력, 그리고 습윤 전면 흡수력을 가지고 있으며 이력 loop가 작아서 침투에 대한 흡수력의 변화 반응이 매우 빠름을 확인할 수 있었다.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권3호
• /
• pp.135-141
• /
• 2023

Background: The limited studies on the effect of buffering on the clinical efficacy of articaine have reported controversial results. The purpose of this study was to clinically compare the pain of injection, anesthetic success, onset, and duration of pulpal anesthesia of buffered 4% articaine with epinephrine 1:100000 versus a non-buffered 4% articaine with epinephrine 1:100000 formulation for buccal infiltration of the mandibular first molar. Methods: Sixty-three volunteers were enrolled in the study. All volunteers received two injections consisting of a single mandibular first molar buccal infiltration with 1.8 ml of 4% articaine with epinephrine 1:100000 and 1.8 ml of 4% articaine with epinephrine 1:100000 buffered with 8.4% sodium bicarbonate. The infiltrations were applied in two separate appointments spaced at least one week apart. After injection of the anesthetic solution at the examined site, the first molar was pulp-tested every 2 min for the next 60 min. Results: Successful pulpal anesthesia was recorded in 69.8% of cases using non-buffered articaine solution and 76.2% of cases using buffered articaine solution, with no significant difference between the formulations (P = 0.219). The mean time of anesthesia onset for the volunteers with successful anesthetic outcome in both formulations (n = 43) was 6.6 ± 1.6 min for the non-buffered articaine solution and 4.5 ± 1.6 min for the buffered solution, which differed significantly (P = 0.001). In the same volunteers, the mean duration of pulpal anesthesia was 28.4 ± 7.1 min for non-buffered articaine solution and 30.2 ± 8.5 min for buffered articaine solution, with no significant difference between the formulations (P = 0.231). Considering the pain of injection, regardless of the anesthetic success, the mean values of VAS were 11.3 ± 8.2 mm for the non-buffered articaine solution and 7.8 ±6.5 mm for the buffered articaine solution, which differed significantly (P = 0.001 < 0.05). Conclusion: According to the present study, 4% articaine with epinephrine can benefit from buffering and provide better anesthetic behavior, with improved onset and less pain during injection.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.256-264
• /
• 2011

목재 자체의 화재저항성능 향상을 위한 기초연구로 마이크로파로 가열된 목재의 침지조건별(상온침지, 열기침지)로 액상 방염약제 침투량과 이에 따른 목재 온도와의 상관성, 방염약제 침투 후 목재의 미세구조와 침투성분 분석을 실시한 결과 마이크로파 가열시간이 높아질수록 침투량이 크게 증대되는 것으로 나타났으며 열기침지의 경우 높은 침투량은 물론 안정적인 방염약제 침투가 가능한 것으로 나타났다. 또한 목재의 온도가 $80^{\circ}C$ 이상 높은 상태에서는 방염약제 침투량이 증대 되었으며 매우 균일한 방염약제 침투성이 확보되는 것으로 나타나 액상의 방염약제는 목재내부로 침투되기 위한 조건으로서 목재의 온도변화에 대한 의존성을 가지는 것으로 판단된다. 미세구조 분석결과 벽공을 통한 방염약제의 세포간 이동성 향상이 방염약제의 침투량이 증대되는 원인으로 사료되며 침투성분 분석 중 열기침지의 경우 변재 및 심재 내부의 벽공 주변에 결정화된 방염약제 성분이 분석됨에 따라 열기침지 시 방염약제는 목재 심재부위까지 침투가 가능한 것으로 나타났다.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.777-783
• /
• 2003

B$_4$C/Al 복합체의 기계적 물성은 제조 과정에서 B$_4$C와 Al의 반응에 의한 반응생성물의 종류와 양에 의해서 결정되므로, 강하고 경량 소재로서의 특성이 요구되는 복합체를 만들려면 반응생성물을 조절할 필요가 있다. TiB$_2$는 알루미늄과 반응성이 거의 없고 B$_4$C보다 낮은 접촉각(100$0^{\circ}C$에서 85$^{\circ}$)을 가지고 있다. 그러므로 B$_4$C를 TiB$_2$로 코팅하면 B$_4$C/Al복합체를 함침법으로 제조하는 경우 알루미늄의 함침 온도를 낮출 수 있다. 본 연구에서는 TiB$_2$가 B$_4$C/Al 복합체의 미세구조와 기계적 특성에 미치는 영향을 조사하였다. TiB$_2$를 코팅한 B$_4$C 분말을 졸겔법을 이용하여 준비하였다. B$_4$C 입자에 코팅된 TiB$_2$ 입자 크기는 20-50 nm이었다. TiB$_2$를 코팅하고 제작한 B$_4$C/Al 복합체에는 l7wt%의 미반응 알루미늄이 남아있었고, 코팅하지 않고 제작한 것에는 l4 wt%가 남았다. 결과적으로 코팅하고 제작한 복합체는 코팅하지 않고 제작한 것보다 파괴인성은 높고 경도는 낮았으며, 이러한 결과에서 TiB$_2$가 알루미늄의 함침 온도를 낮추고 B$_4$C와 Al이 반응하는 것을 억제하고 있다는 것을 알 수 있었다.

• The Plant Pathology Journal
• /
• 제24권3호
• /
• pp.296-304
• /
• 2008

The transient and rapid expression system of a foreign protein in planta is a very useful technique in biotechnology application. We have investigated optimum condition of Agrobacterium-infiltration technique in which expression level of foreign proteins were maximized without detrimental effects on plants using GFP and Cucumber mosaic virus 2b protein, which is known as an enhancer of gene expression and a suppressor of post-transcriptional gene silencing(PTGS). The optimum expression level of both RNA and protein of GFP with minimum leaf impairment was obtained at $OD_{600}$=0.2 of Agrobactrium inocula. The steady-state levels of GFP RNA and protein generally peaked at 3 and 7 days post-infiltration(dpi), respectively. In the presence of 2b, both the magnitude and duration of GFP expression was highly increased and we could detect GFP level until 17 dpi. On the other hands, the 2b-mediated higher accumulation of foreign proteins resulted in the repression of normal leaf growth, possibly due to the limitation of supply of energy or materials required for growth maintenance. Using this Agrobacterium-infiltration system with 2b and GFP, we tested a hypothesis for the threshold model of PTGS initiation. Four GFP transgenic lines of N. benthamiana, which shows different expression level of GFP were tested to determine the threshold level for PTGS initiation. Agrobacterium-infiltration of GFP into those GFP-transgenic plants resulted in the co-silencing of the transgenic GFP. It was found that very low concentration of Agrobacterium with GFP and GFP+2b($OD_{600}$=0.002-0.02) which could not phenotypically induce an additive GFP expression, was enough to trigger PTGS pathway in all GFP transgenic plants. This strongly indicates that each GFP-transgenic plant should be expressing the transgenic GFP at its own pre-determined level and there was no buffer zone of additive GFP-expression to the threshold. In other words, the PTGS seems to be immediately activated as a self-defensive mechanism if an internal balance of gene expression is broken.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.57-66
• /
• 2018

Water disasters such as flash floods and inundation caused by localized heavy rainfall in urban areas have a large impact on climate change but are also closely related to the increase in impervious areas as pointed out in domestic and international studies. It is difficult to secure natural green areas in urban areas that have already been developed. So, urban regeneration can be expected using water management optimized with technologies to secure infiltration and storage capacity such as Low-Impact Development technology. In this study, the water cycle improvement ability was confirmed by applying the LID technology within the district unit plan of the environmentally friendly village, and the economic feasibility of LID application was analyzed by estimating the costs and benefits of installing the facilities. The site was planned to conserve sufficient green and plans for securing the watershed infiltration and storage capacity were formulated with the application of additional LID technology, such as infiltration trenches, rain barrels and permeable pavements. The LID design method applicable to the site was established, and the water balance of the watershed was analyzed through simulations of the SWMM model. The water circulation improvement effect was confirmed through the water balance analysis, and the cost-benefits were determined according to the estimation method, and the economic analysis was conducted. This study confirms that the investment of LID technology is economically feasible for the hydrological improvement effect of the housing complex.

• 한국물환경학회지
• /
• 제36권3호
• /
• pp.206-219
• /
• 2020

As urbanization and impermeable areas have increased, stormwater and non-point pollutants entering the stream have increased. Additionally, in the case of the old town comprising a combined sewer pipe system, there is a problem of stream water pollution caused by the combined sewer overflow. To resolve this problem, many cities globally are pursuing an environmentally friendly low impact development strategy that can infiltrate, evaporate, and store rainwater. This study analyzed the expected effects and efficiency when the LID facility was installed as a measure to improve hydrologic cycle and water quality in the Oncheon stream in Busan. The EPA-SWMM, previously calibrated for hydrological and water quality parameters, was used, and standard parameters of the LID facilities supported by the EPA-SWMM were set. Benchmarking the green infrastructure plan in New York City, USA, has created various installation scenarios for the LID facilities in the Oncheon stream drainage area. The installation and maintenance cost of the LID facility for scenarios were estimated, and the effect of each LID facility was analyzed through a long-term EPA-SWMM simulation. Among the applied LID facilities, the infiltration trench showed the best effect, and the bio-retention cell and permeable pavement system followed. Conversely, in terms of cost-efficiency, the permeable pavement systems showed the best efficiency, followed by the infiltration trenches and bio-retention cells.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.278-287
• /
• 2009

This thesis studied effect of zoning on seepage flow in concrete faced gravel-fill dam (CFGD) designed to have selected main rockfill or gravel-fill zone, Zone 3Bs with higher permeability to enhance the safety against accidental water infiltration into the dam. For this purpose, centrifuge model tests with two cases, with and without Zone 3Bs, were performed in order to investigate the necessity and the function of Zone 3Bs. Model dams were made by soil samples with modified coefficients of permeability and concrete faced slab was simulated with aluminum alloy. Water infiltration was simulated by rising water table over cracks on the facing. Behaviors of model dams were measured by LVDTs, strain gages, pore water pressures and cameras. Form the results of centrifuge tests, it was found out that the Zone 3Bs acts as a protection of main gravel-fill zone by inducing flow paths for infiltrated water into it as well as by draining off the infiltrated water out of the dam in a short time.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.71-79
• /
• 2009

The incomplete saturation and the void formation during the resin infiltration into fibrous porous media in the resin transfer molding process cause failure in the final product during its service. In order to better understand flow behavior during the filling process, a finite-element scheme for transient flow simulation across the micro-structured fibrous media is developed in the present work. A volume-of- fluid (VOF) method has been incorporated in the Eulerian frame to capture the evolution of flow front and the vertical periodic boundary condition has been combined to avoid unwanted wall effect. In the microscale simulation, we investigated the transient filling process in various fiber structures and discussed the mechanism leading to the flow fingering in the case of random fiber distribution. Effects of the filling pressure, the shear-thinning behavior of fluid and the volume fraction on the flow front have been investigated for both intra-tow and the inter-tow flows in dual-scale fiber tow models.