• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3091-3097
• /
• 1994

An expert system for NC part programming of NC lathe (ESPP-1) is developed as a part of Computer-Adied Manufacturing system. Conventional computer-assisted part programming system essentially requires an NC part programmer who is an expert in NC part programming. But the developed ESSP-1 can allow an inexperienced person to make an excellent NC data for the NC Lathe without any problem, since the system has a knowledge base composed of EIA and ISO NC code, feed rate, spindle speed, machining coordinates selection, and tool selection etc., which were directly evoked from some skilled NC part programmers, and referenced some machining handbooks. This paper discusses the algorithm of the expert system for NC part programming of the NC lathe (ESPP-1) and the performance comparisons between the developed expert system and the conventional system.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.197-199
• /
• 2000

The various criteria to identify the disturbances of the power transformer has been reported in this paper. They have been derived through EMTP simulations of internal faults, inrush and overexcitation for the model of 154/22.9[kV], 40[MVA], Y-Y three-phase power transformer. We also propose the algorithm which makes bpa Functions and infers the final decision from them based on Modfied Dempster-Shafer's rule of combination.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1018-1023
• /
• 1993

In mechanical structure design area, many FEM (Finite Element Method) packages are used. But the design using FEM packages depends on an iterative trial and error manner and general CAD systems cannot cope with the change of parameters. This paper presents a methodology for building a designing system of a mechanical structure. This system can generate the drawing for a designed structure automatically. It consists of three steps: generation of a structure by selection of the parameters, stress analysis, and generation of a drawing using CAD system. FEM module and parametric CAD module are developed for this system. Inference engine module generates the parameters with a rule base and a model base, and also evaluates the current structure. The parametric design module generates geometric shapes automatically with given dimension. Parametric design is implemented with the artificial intelligent technique. In older to the demonstrate the effectiveness of the developed system, a frame set of bicycle was designed. The system was implemented on an SUN workstation using C language under OpenWindows environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1524-1529
• /
• 2005

Particle filter is a kind of conditional density propagation model. Its similar characteristics to both selection and mutation operator of evolutionary strategy (ES) due to its Bayesian inference rule structure, shows better performance than any other tracking algorithms. When a new object is entering the region of interest, particle filter sets which have been swarming around the existing objects have to move and track the new one instantaneously. Moreover, there is another problem that it could not track multiple objects well if they were moving away from each other after having been overlapped. To resolve reinitialization problem, we use competitive-AVQ algorithm of neural network. And we regard interfarme difference (IFD) of background images as potential field and give priority to the particles according to this IFD to track multiple objects independently. In this paper, we showed that the possibility of real-time object tracking as intelligent interfaces by simulating the deformable contour particle filters.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.2
• /
• pp.3-15
• /
• 1997

In order to apply fuzzy logic, two major tasks need to be performed: the derivation of fuzzy rules and the determination of membership functions. These tasks are often difficult and time-consuming. This paper presents an algorithmic method for generating membership functions and fuzzy rules applicable to decision-making problems; the method includes an entropy minimization for clustering analog samples. Membership functions are derived by partitioning the variables into desired number of fuzzy terms, and fuzzy rules are obtained using minimum entropy clustering. In the mle derivation process, rule weights are also calculated. Inference and defuzzification for classification problems are also discussed.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.507-509
• /
• 1999

In this paper, we propose a new fuzzy model identification method that can yield a successful fuzzy rule base for fundamental approximations. The method in this paper uses a set of input-output data and is based on a hybrid messy genetic algorithm (mGA) with a fine-tuning scheme. The mGA processes variable-length strings, while standard GAs work with a fixed-length coding scheme. For successfully identifying a complex nonlinear system, we first use the mGA, which coarsely optimizes the structure and the parameters of the fuzzy inference system, and then the gradient descent method which tine tunes the identified fuzzy model. In order to demonstrate the superiority and efficiency of the proposed scheme, we finally show its application to a nonlinear approximation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.179.2-179
• /
• 2001

This paper is about to consist of neutralization public decision system which is level controled the amount of inflow and outflow water to make use of PLC in automatic system and according to numerical value of PH, which is projected into a water tank counteragent automatically. But neverthless, appearance of extended PLC, there is a limit to realize from automatic system to intellectual system which is more efficient and active. There are two problems in PLC. First, there is not generalized that a module of PLC (which is installed in PLC) is realized control algorithm form. Second, there is a difficulty of expression that provided PLC control language is realized. There fore I take fuzzy inference control technique of various intellectual algorithm and 1 make a control rule and ...

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.1
• /
• pp.69-77
• /
• 1999

This paper describes an expert system of progressive die. Because of the complexity for die structure and of the critical problems for press machine mechanism in the progressive press process such as, the travel length in process, the equalized press load, and the other design parameter, it has been increased the requirement of the CAD system for progressive die design more an more. So, through this study, an expert system of progressive die has been developed. The results from the system developed were suggested the possibility of applications in the practice. To develop this system, it has used c-language under the HP-UNIX system and CIS customer language of the EXCESS CAD/CAM system. An application of this system will provide effective aids to the designer in this field.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.869-873
• /
• 1992

A fuzzy controller is designed for compensating the cross-coupling effect of induced roll due to the dynamic characteristics of three fin torpedo. Since the utilization of fuzzy-coprocessor has many interfacing problems with typical microprocessors of the guidance and control unit, the simplified fuzzy inference method based on nonfuzzy-processor is proposed to implement fuzzy controllers of three fin torpedo. This method provides a flexible rule-base design to guarantee the robust control. The good potential of the proposed design is shown through real-time simulations using both a mathematical model on AD-100 computer and an implemented controller on Intel 80C186/80C 187 microprocessors employing 12bit A/D converter.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.262-271
• /
• 2003

Specification of reinforcement method was suggested according to the ground condition and tunnelling environment such as adjacent building and surface settlement. Tunnel database consists of 8 different groups of data according to the tunnel construction situations and major problems of ground. A tunnel countermeasure expert system based on client/server system was developed with on-line. The expert system provides proper solution to the each construction sites backing up the information of the tunnelling and ground information through Internet. The effective factors of tunnel construction were shown by the analyzing relationship and partial relationship between face stability and RMR factors. This study will be very helpful to make the most of in-situ data and suggest proper applicability of tunnel reinforcement system escaping from the dependence of some experienced experts for the absent of guide.