• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.684-687
• /
• 2006

Airborne imagery must be precisely orthorectified to be used as geographical information data. GPS/INS (Global Positioning System/Inertial Navigation System) and LIDAR (LIght Detection And Ranging) data were employed to automatically orthorectify airborne images. In this study, 154 frame airborne images and LIDAR vector data were acquired. LIDAR vector data were converted to raster image for employing as reference data. To derive images with constant brightness, flat field correction was applied to the whole images. The airborne images were geometrically corrected by calculating internal orientation and external orientation using GPS/INS data and then orthorectified using LIDAR digital elevation model image. The precision of orthorectified images was validated using 50 ground control points collected in arbitrary selected five images and LIDAR intensity image. In validation results, RMSE (Root Mean Square Error) was 0.365 smaller then two times of pixel spatial resolution at the surface. It is possible that the derived mosaicked airborne image by this automatic orthorectification method is employed as geographical information data.

• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.15-23
• /
• 2007

In surveillance, monitoring, and target tracking operations, high-resolution images should be obtained even if the target is in a far distance. Frequent movements of vehicles such as boats degrade the image quality of onboard camera systems. Therefore, stabilizer mechanisms are required to stabilize the line of sight of boatboard camera systems against boat movements. This paper addresses design and implementation of a strapdown boatboard camera stabilizer. A two degree of freedom(DOF)(pan/tilt) robot performs the stabilization task. The main problem is divided into two subproblems dealing with attitude estimation and attitude control. It is assumed that exact estimate of the boat movement is available from an attitude estimation system. Estimates obtained in this way are carefully transformed to robot coordinate frame to provide desired trajectories, which should be tracked by the robot to compensate for the boat movements. Such a practical robotic system includes actuators with fast dynamics(electrical dynamics) and has more degrees of freedom than control inputs. Backstepping method is employed to deal with this problem by extending the control effectiveness.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.55-63
• /
• 1995

The flow field around a high-speed train including cross-wind effects has been simulated. This study solves 3-D unsteady incompressible Navier-Stokes equations in the inertial frame using the iterative time marching scheme. The governing equations are differenced with 1st-order accurate backward difference scheme for the time derivatives, 3th-order accurate QUICK scheme for the convective terms and 2nd-order accurate central difference scheme for the viscous terms. The Marker-and-Cell concept was applied to efficiently solve continuity equation, which is differenced with 2nd-order accurate central difference scheme. The 4th-order artificial damping is added to the continuity equation for numerical stability. A C-H type of elliptic grid system is generated around a high-speed train including ground. The Baldwin-Lomax turbulent model was implemented to simulate the turbulent flows. To validate the present procedure, the flow around a high speed train at constant yaw angle of $45^{\circ}\;and\;90^{\circ}$ has been simulated. The simulation shows 3-D vortex generation in the lee corner. The flow separation is also observed around the rear of the train. It has concluded that the results of present study properly agree with physical flow phenomena.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.369-378
• /
• 2013

This paper presents a vision/LiDAR integrated navigation system that provides accurate relative navigation performance on a general ground surface, in GNSS-denied environments. The considered ground surface during flight is approximated as a piecewise continuous model, with flat and slope surface profiles. In its implementation, the presented system consists of a strapdown IMU, and an aided sensor block, consisting of a vision sensor and a LiDAR on a stabilized gimbal platform. Thus, two-dimensional optical flow vectors from the vision sensor, and range information from LiDAR to ground are used to overcome the performance limit of the tactical grade inertial navigation solution without GNSS signal. In filter realization, the INS error model is employed, with measurement vectors containing two-dimensional velocity errors, and one differenced altitude in the navigation frame. In computing the altitude difference, the ground slope angle is estimated in a novel way, through two bisectional LiDAR signals, with a practical assumption representing a general ground profile. Finally, the overall integrated system is implemented, based on the extended Kalman filter framework, and the performance is demonstrated through a simulation study, with an aircraft flight trajectory scenario.

• 한국전산유체공학회지
• /
• 제14권2호
• /
• pp.68-76
• /
• 2009

The sloshing tank causes the instability of the fluid flows and the fluctuation of the impact pressure by the liquid on the tank. These flow characteristics inside the sloshing tank can generate the uncomfortable sloshing noise. In the present study, a numerical analysis for the reduction of a fuel tank sloshing noise was performed. To simulate the flow characteristics in a sloshing tank with partially filled liquid, a VOF method was used for interfacial flows by applying a momentum source term for the sloshing motion in a non-inertial reference frame. This numerical method was verified by comparing its results with the available experimental data. For the reduction of the sloshing noise, the horizontal and vertical baffles and porous media inside a sloshing tank were considered and numerically analyzed in the present study. For various installations of these baffles and porous media, the characteristics of the liquid behavior in the sloshing tank were obtained along with the impact pressure on the wall and the height of the free surface along the wall. These basic results can be used for the design of the actual vehicular fuel tank with the reduced sloshing noise.

• 한국음향학회지
• /
• 제16권6호
• /
• pp.61-67
• /
• 1997

압전 회전센서(Piezoelectric Gyroscope)는 물체의 회전속도를 감지하기 위한 센서로서 압전효과를 이용해 코리올리스힘(Coriolis Force)을 측정하는 센서이다. 기존에 사용되고 있는 압전 회전센서는 1축형이 주종을 이루고 있는데 비하여 본 연구에서는 한 차원 발전된 2축형의 회전센서를 고안, 제작하였다. 이러한 새로운 구조에 대한 검토 및 고찰을 위해 유한요소법 (Finite Element Method) 을 통한 동적 해석을 실시하여 구조의 타당성을 검증하고 각 설계인자 변화에 따른 센서의 특성변화를 조사하였다. 또한 그 결과를 토대로 직접 회전센서를 제작하여 그 성능을 평가, 비교하였다. 나아가 센서의 특성평가를 위한 회전 시뮬레이터를 구성한 후 정량적인 실험을 통해 제작된 센서의 반응을 조사하였으며, 그 결과 본 논문에서 개발된 2축형 센서는 두 방향의 회전력에 대한 우수한변별도 및 감도를 나타내어 새로운 형태의 회전 센서로서의 사용가능성을 확인할 수 있었다.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.535-542
• /
• 2006

본 논문에서는 압연형강(H형강)을 이용한 강합성 교량에 대한 3차원 유한요소 해석을 실시하여, 가로보가 활하중 횡 분배에 미치는영향에 대해 검토하였다. 고려된 주요 변수는 주형과 가로보의 단면2차모멘트비, 가로보의 설치 여부, 가로보의 개수 등이다. 유한요소 해석을 통한 활하중 횡분배 계수와 함께 관용적인 격자해석에 의한 활하중 횡분배 계수도 비교하였다. 분석결과에서 가로보는 활 하중 횡분배에 별다른 영향을 미치지 못하며, 콘크리트 바닥판이 활하중 횡분배에는 가장 중요한 역할을 하는 것으로 나타났다. 따라서 활하중 횡분배를 목적으로 설치하는 가로보는 제거가 가능한 것으로 판단된다.

• 항공우주기술
• /
• 제5권2호
• /
• pp.149-158
• /
• 2006

분리된 페어링의 동안정 미계수 예측을 위해 기술 및 비용적 측면을 고려하여 어떤 방 법이 가장 적합할지에 대한 검토가 수행되었으며, 탑재물 페어링의 형상적 특성, 계산 조 건, 그리고 요구되는 정확도 등을 고려한 최적의 예측 방법을 선정하였다. 관성 좌표계에 대해 기술된 Euler 방정식을 해석하여 강제조화운동이 가해진 분리 PLF의 비정상 공력계수를 구하였으며, 이를 한 주기 동안 적분하여 동안정 미계수를 산출하였다. 이와 같은 기 법을 적용함으로써 분리된 3차원 PLF 형상에 대해 마하수 0.60~2.00, 받음각 $-180^{\circ}$~$180^{\circ}$ 및 옆미끄럼각 $-90^{\circ}$~$90^{\circ}$에 대하여 동안정 미계수를 얻을 수 있었다.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.470-478
• /
• 2019

Because the global positioning system (GPS) is not available in underwater environments, an inertial navigation system (INS)/doppler velocity log (DVL) integrated navigation system is generally implemented. In general, an INS/DVL integrated system adopts a loosely coupled method. However, in this loosely coupled method, although the measurement equation for the filter design is simple, the velocity of the body frame cannot be accurately measured if even one of the DVL transducer signals is not received. In contrast, even if only one or two velocities are measured by the DVL transducers, the tightly coupled method can utilize them as measurements and suppress the error increase of the INS. In this paper, a filter was designed to regenerate the measurements of failed transducers by taking advantage of the tightly coupled method. The regenerated measurements were the normal DVL transducer measurements and the estimated velocity in RPM. In order to effectively estimate the velocity in RPM, a filter was designed considering the effects of the tide. The proposed filter does not switch all of the measurements to RPM if the DVL transducer fails, but only switches information from the failed transducer. In this case, the filter has the advantage of being able to be used as a measurement while continuously estimating the RPM error state. A Monte Carlo simulation was used to determine the performance of the proposed filters, and the scope of the analysis was shown by the standard deviation ($1{\sigma}$, 68%). Finally, the performance of the proposed filter was verified by comparison with the conventional tightly coupled method.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.114-129
• /
• 1996

This paper describes the whole development phase for the underwater vehicle actuating system with high hydroload torque disturbance. This includes requirement analysis, system modeling, control algorithm design, real time implementation, test and performance evaluations. As for driving control algorithms, fuzzy logic, variable structure and PD(Proportional-Differential) algorithm were designed and implemented on board controller using a single chip microprocessor. Intel 8797. And test and performance evaluation is carried out both single test and wystem integration test. We could confirm the basic performance of actuating system through the single test and gereral developing work of any actuating systems was finished with a single performance test of actuating system without system integration test. But, we suggested that system integration test be needed. System integration test is carried out using G/C HILS(Guidance and Control Hardware-In-the -Loop Simulation) which is constituted flight motion simulator, load simulator, real time host computer and the related subsystems such as inertial navigation system, power supply system and Guidance and Control Computer etc.. The most important practical contribution of this paper is that full system characteristics such as minimal control effort, enhancement of guidance and autopilot performance by the actuating system using G/C HILS technique are investigated. Through full running G/C HILS, in spite of the passing to single tests, some control algorithm resulted in failure as to stability of full system and system time frame.