• 펄프종이기술
• /
• 제38권3호
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.130-151
• /
• 2002

This paper investigates the relation between the Process capability index(PCI) and the quality assurance level under various conditions. The effect of the off-targetness of the process mean, deviation from the nomality, the estimation error, and tile measurement error on the quality assurance level is evaluated. Various distributions such as the Student-t, the chi-square, the gamma, the Weibull, and the log-normal distributions are considered to evaluate the deviation from the nomality. The quality levels under abnormal conditions turn out to be severely different from that under the standard condition. We provide tables and graphs of the quality assurance level on various abnormal conditions. In order for the industry users to use the PCI properly, they should refer to the tables and graphs, especially when they are not certain about the standard assumptions on which the PCI depends.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.205-206
• /
• 2019

National Competency Standard(NCS) is a national organization that organizes the knowledge, skills, and quality required to perform duties at industrial sites by industry sector and level. As NCS was developed and adopted as part of the government's implementation of capability-oriented society, the construction industry is also fully applying NCS to the curriculum and training. This study investigated and analyzed the problems of NCS development in construction work field through prior research analysis and experts interview and derived problems such as discrepancies in classification system, lack of connectivity with curriculum, and lack of effectiveness in revising NCS in construction work field. Further research is thought to be necessary for the establishment of the development system reflecting the construction characteristics in the future and for the presentation of practical improvement directions.

• 한국산업융합학회 논문집
• /
• 제26권2_1호
• /
• pp.239-248
• /
• 2023

In this paper, we conduct a study on the design that can secure the safety of the EPLA system by performing safety activities based on the ISO 26262 standard for vehicle functional safety. In the case of a company developing a detailed system, it is responsible for verification through hardware design and safety analysis in the overall flow of safety activities, and safety analysis according to the ASIL safety level must be properly performed. At this time, there are cases where the safety goal quantitative metric value suggested by the ISO 26262 standard cannot be satisfied only by the hardware design of the basic function, so it is necessary to design and install the safety mechanism. Based on ISO 26262 safety activities, it is possible to derive an effective design plan through hardware safety analysis.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2005년도 e-Biz World Conference 2005
• /
• pp.62-67
• /
• 2005

In traditional approach, enterprise-wide consistent security policy enforcement for applications is very difficult task. Therefore, industry is now moving towards new unified enterprise application security concept that consist of centralized authentication and authorization mechanism. The eXtensible Access Control Markup Language (XACML); an XML-based standard defined by OASIS, is most suitable choice which can support centralized, role based, context aware access control mechanism. It is designed to provide universal standard for writing authorization policies and access control request/response language for managing access to the resources. This paper includes a brief overview on XACML and discusses its benefits, limitations and a data flow process. We propose a new generic access control architecture that supports enterprise wide centralized application level access control mechanism using XACML. The other benefits which can be achieved through this architecture are, reduce adnministration cost and complexity, support of heterogeneous computing platforms, centralized monitoring system, automatic fail over, scalability and availability, open standard based solution and secure communication.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1675-1680
• /
• 2000

Recently the uncertainty has been made rapid progress in various fields of industry but the uncertainty measurement method of acoustical test (i.e. Insertion loss, Absorption ratio, Transmission loss etc,) hasn't been established. In this study, the uncertainty of measurement method for ducted silencers is carried out according to ISO 7235. The standard uncertainty factors are composed of sound pressure level, microphone sensitivity and pistonphone calibration in this measurement. Sound pressure level is type A evaluation of uncertainty, microphone sensitivity and pistonphone calibration are type B evaluation of uncertainty. The combined standard uncertainty is calculated by two type evaluation. The expanded uncertainty is expressed by the combined standard uncertainty multiply k value which is yield the effective degree of freedom.

• 산업경영시스템학회지
• /
• 제11권18호
• /
• pp.41-57
• /
• 1988

This study was carried out to furnish information for the appropriate standard work time measure and applicate system development that help for korean manufacturers. As a research methodology of the study, the questionnaire survey by sampling nine hundreds registerd corporation, was conducted to find the scientific management technique level (for especially standard work time). By crossectionally analyzing the survey results, placed primary emphasis on the study to comparison with employee scale and types of industry classify. The contents of subjective study art as follows; (1) Establish state of standard time(S. T) (2) Mainly technique for establish S. T (3) Institute level and correctness of S. T (4) Practical use of S. T (5) Performance rating and Allowance rate (6) Advantage and disadvantage to application results.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.73-84
• /
• 2006

Standard safety management cost system was established in 1988 as a decree Number of 88-13, first time. And then, it has been revised fourteen times, up to now. A lot of practical investigations have been made for the revision but many problems at sites are continued to be put out so that it should be revised. This study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. Budget and actually performed amount of safety management costs in this study are investigated. costs for temporary work which is clarified in Japan is collected in order to compare domestic cost rate with Japanese one related to the total project amount. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basical data and material to be systemized.

• International Journal of Safety
• /
• 제11권2호
• /
• pp.29-37
• /
• 2012

Since most construction workers comprehend information on work through sight, the importance of safety signs are increasing by the day. In Korea, due to the sharp economic progress and the higher standard of the workforce, since the end of 1980, each year the number of foreign workers entering the country who working simple technical jobs have increased this condition. This study researched safety signs, which are the final accident prevention measures at the workplace. Based on the study, comprehension of the standard safety signs of the Occupational Safety and Health Act (OSHA) was lacking at a level of 2.5. Also, the perception level of the Industry Public Safety Law (38%) was very low. And, it was found that sex and experience or non-experience in safety training was not an issue in the level of understanding. However, when satisfying the standards of the Occupational Safety and Health Act and changing the safety signs, the level of understanding went up to 3.49 and the perception level was increased significantly to 70%. Thus, it is concluded that, since the foreign workers are mainly from non-English speaking countries and because the workers of Korea are not familiar with English, in order to provide proper safety information, there must first of all be simplistic and concise pictograms. This will provide needed information and must be coupled with simple English words that can give additional information to the worker and be effective in helping him understand and perceive the safety sign. Also, it has been determined that the existing forms of safety signs and their effectiveness in industry accident prevention must be reassessed.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2007년도 추계학술대회
• /
• pp.691-696
• /
• 2007

The structure of industry has changed from manufacturing economy to service industry economy. Especially when it comes to the standard of the countries with OECD membership, the ratio of the service industry regarding the total industry as well as the total working labor has been reaching to 70%. Considering these facts in mind, the productivity of service industry has become crucial day by day. Under this situation, this study aims to help seeking the solution to enhance the productivity by comparing and analyzing the productivity level of theme park industry in Korea with that of an advanced country. The service productivity of two companies that represent tour and leisure industry in Korea and Japan are compared and analyzed, and through this it suggests ways to improve service productivity of theme park industry in Korea.