• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.111-121
• /
• 2007

Diagnosis and Prediction of urban industrial structure is a key subject for establishment of sustainable urban development plan. By this time, studies of industry-related urban spatial structure have been concentrated on measurement of space distribution by industry type mainly using data about urban industries or total worker numbers. Now, status of workers become an important issue so this study analyzed qualitative change of urban industrial structure in the view of space using work status classification system. For that, data for work status in 1994 and 2004 were collected in towns and villages, and space analysis units were coincided based on change data between 1994 and 2004. Then, it analyzed spatial distribution pattern of employment through qualitative standard called work status using GIS. The analysis results by work status type of Busan industrial structure in GIS circumstance were as below. First, traditional labor intensive industries met a limit and service and wholesale/retail sale industries went to be poor livelihood. Therefore, Busan's employment rate should be decreased and worker numbers were statistically increased, however, irregular and non-wage workers were suddenly increased. So, it was determined that the quality of employment in Busan area came down. Second, a traditional downtown area has dwindled; on the other hand, employment has been increased in new town or new industrial complex and in the area developed services rather than the manufacturing industry. It is expected that the result of this study may be meaningful as data to prepare for longterm industrial development plan through qualitative evaluation called work status as well as to make behavior pattern of industrial structure which is basis of urban development.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.186-191
• /
• 2014

Double layer films which consisted of aluminum(Al) and magnesium(Mg) have been prepared by e-beam deposition. The structure, alloy phase, and corrosion resistance of the prepared films were investigated before and after heat treatment. The first (bottom) layer fixed with Al, and the thickness ratio between Al and Mg layers has been changed from 1 : 1 to 5 : 1, respectively. Total thickness of Al-Mg film was fixed at $3{\mu}m$. The cold-rolled steel sheet was used as a substrate. Heat treatment was fulfilled in an nitrogen atmosphere at the temperature of $400^{\circ}C$ for 2, 3 and 10 min. Surface morphology of as-deposited Al-Mg film having Mg top layer showed plate-like structure. The morphology was not changed even after heat treatment. However, cross-sectional morphology of Al-Mg films was drastically changed after heat treatment, especially for the samples heat treated for 10 min. The morphology of as-deposited films showed columnar structure, while featureless structure of the films appeared after heat treatment. The x-ray diffraction data for as-deposited Al-Mg films showed only pure Al and Mg peaks. However, Al-Mg alloy peaks such as $Al_3Mg_2$ and $Al_{12}Mg_{17}$ appeared after heat treatment of the films. It is believed that the formation of Al-Mg alloy phase affected the structure change of Al-Mg film. It was found that the corrosion resistance of Al-Mg film was increased after heat treatment.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.3
• /
• pp.299-319
• /
• 2022

Since 2010, there have been phenomena that the recession of key industries has spreaded into a regional crisis, affecting the overall regional economy in Korea. The purpose of this study is to analyze how the regional industrial structure and manufacturing competitiveness has been changed in Gunsan, which is in crisis due to the decline of the shipbuilding and automobile industries. As a result, the pace of change in industrial structure of Gunsan has accelerated, and this is because the mass employment released from the key industries has been absorbed into other industries, but there were no manufacturing fields that could replace the recession of the key industries. Among the manufacturing of Gunsan, the degree of specialization of the basic industries has been gradually weakened, and in addtion, the weakening of location competitiveness has brought a negative impact on the growth rate differential of the manufacturing. It is necessary to closely examine changes in characteristics of regional industrial structure for Gusan to find an alternative direction in order to respond to the manufacturing crisis.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.24-33
• /
• 2022

Fiber-reinforced plastics(FRPs) have excellent specific stiffness and strength, so they are usually used as automotive parts that require high rigidity and lightweight instead of metal. However, it is difficult to predict the mechanical properties of injection molded parts due to the fiber orientation and breakage of FRPs. In this paper, the fiber orientation characteristics and mechanical properties of injection molded specimens were evaluated in order to fabricate automotive transmission side covers with FRPs and design a rib structure for improvement of their rigidity. The test molds were designed and manufactured to confirm the fiber orientation characteristics of each position of the injection molded standard plate-shaped specimens, and the tensile properties of the specimens were evaluated according to the injection molding conditions and directions of specimens. A gusset-rib structure was designed to improve the additional structural rigidity of the target products, and a proper rib structure was selected through the flexural tests of the rib-structured specimens. Based on the evaluation of fiber orientation and mechanical characteristics, the optimization analyses of gate location were performed to minimize the warpage of target products. Also, the deformation analyses against the internal pressure of target product were performed to confirm the rigidity improvement by gusset-rib structure. As a result, it could be confirmed that the deformation was reduced by 27~37% compared to the previous model, when the gusset-rib structure was applied to the joining part of the target products.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.150-150
• /
• 1993

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.61-68
• /
• 2003

In this paper, a representation method for structure information retrieval without schema and DTD of XML documents is presented. While existing researches have used DTD or schema to extract structure information, we extract structure information directly from XML documents. Especially the well-formed XML documents are only required to retrieve documents in the proposed method. Thus it can retrieve more general and various documents easily compared to the existing XML retrieval systems requiring DTD or schema. Experimental result indicates that the proposed method retrieves effectively structure information of XML documents independently to DTD information.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.33-42
• /
• 2006

From middle of 90's, SCM had emphasized the importance of connection of all companies which participate to a market, and outsourcing has emphasizes the slim structure of companies for pursing cost reduction and service improvement. But outsourcing as '2-1=1' and integration as '1+1=2' not adapt to the advanced market but return to the former state. Besides, it is impossible of subcontractors and logistics companies to execute these strategies which are win-win strategy and outsourcing. So many logistics companies have sharp competition in price recently. Therefore logistics companies have increased the need for a profitable business model and strategy. This paper researches the limitations of logistics market and redefines the role of logistics through the evolution of logistics. Also this paper proposes new role(Logister) and structure(Velcro structure) for not maker-oriented logistics but market-oriented logistics. The introductory case study will help to understand 2 terms(logister and velcro structure).

• Journal of the Korean Regional Science Association
• /
• v.10 no.1
• /
• pp.19-37
• /
• 1994

The past studies on the change of industrial location can be reinterpreted as spatial determinism, decision making process determinism and industrial sturcure determinism according to the view of the mutual operation between the economic activity and spatial structure. From the point of the industrial structure determinism which focuses on the fact that the locational type of production activity can be differenciated by the structural change of industry itself, it is proper to explain the change of industrial location not only by spatial condition but also by containing the fundamental changing causes for the reorganization of the spatial condition. One of the most important changing causes for reorganizing economic space is industrial technology. This study aims to explain the spatialization process of industrial technology and consists of the process of suggesting the hypothesis that the spatialization process is differentiated according to the production organization as the user of industrial technology and the user of industrial technology and the production system as using method. In other words, this study attempts to internalize the technology variable, which has been treated as external in the past studies on the industrial location, as an independent one and consider the production organization and production system as a paramenter, so that it can represent 'conceptual framework' for explaining the change of industrial location.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.11-25
• /
• 2007

Despite surging interests in analyzing business processes, there are few scientific approaches to analysis and redesign of organizational structures which can greatly affect the performance of business processes. This paper presents a method for deriving and analyzing organizational relations from process models using social network analysis techniques. Process models contain information on who performs which processes and activities, along with the assignment of organizational units such as departments and roles to related activities. To derive social relations between organizational units from process models, three types of metrics are formally defined: transfer of work metrics, subcontracting metrics, and cooperation metrics. By applying these metrics, various relations among organizational units can be derived and analyzed. To verify the proposed method and metrics, they are applied to standard process models of the semiconductor and electronic, and automotive industry in Korea. This paper presents a taxonomy for diagnosing organization structure based on the presented approach. The paper also discusses how to combine analyses in the taxonomy for redesign of organizational structures.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.179-184
• /
• 2004

This paper is an overview of the experimental work using a Planar Magnetic Levitation Stage System structure proposed by Dr. Won-Jong Kim in his PhD thesis. Based on his results, we built an Experimental Test Stand (ETS), which enabled us to get accustomed with the new technology and to create new control structures and algorithms. The ETS is controlled by a powerful controller made of 4 DSPs mastered by a PC. This controller structure increases the controller bandwidth up to 10 kHz leading to a better emulation of an analog controller and leaving enough room for further development. Based on analyzing all the factors that can affect the performances of the system, we achieved a great accurate positioning performance of sub-nanometer RMS value.