• International Journal of Fluid Machinery and Systems
• /
• 제7권2호
• /
• pp.80-85
• /
• 2014

In this study, we visualized the internal flow of a regenerative turbomachinery using the direct injection tracer method. For visualization, the working fluid was water and the tracer was oil colors (marbling colors). Droplets were injected at the inlet of the machinery and the streak were recorded using a high-speed camera with high-power light sources. While circulating inside the groove, the droplets were translated by the rotational motion of the impeller. When the droplets flow out of the impeller groove, relative to the impeller, they moved more slowly. And the droplets repeatedly reentered into the groove and circulated again. Then the droplets either flowed to the outlet or to the stripper. As a result, this experiment has confirmed the internal circulating flow of a regenerative turbomachinery.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.92-92
• /
• 2017

밭작물 중 마늘 재배를 위한 노동력 투입시간은 2016년 기준 10a 당 126.9시간 이었고, 파종정식의 기계화율은 2015년 기준 15.1%로 조사된다. 이는 마늘 재배에 있어서 파종정식의 기계화가 노동력 절감을 위해 필요하다는 것을 보여준다. 현재의 우리나라 마늘 파종기는 점파식으로 개발, 판매되고 있는데 집개 방식 또는 버킷 방식은 파종 속도를 올리면 파종율이 떨어지기 때문에 파종 속도를 향상시키는데 한계가 있있다. 본 연구에서는 이를 보완하기 위하여 콩, 옥수수 등의 종자에 사용되는 진공식 파종 기술을 마늘에 적용하였다. 마늘의 경우 형상이 비대칭형에다가 종구별 크기, 모양, 무게가 조금씩 다르기 때문에 이론적으로 흡입구를 설계하는 어려움이 있다. 따라서 진공흡입구의 지름과 재질을 파라메터로 하여 변화를 주고 실험을 통하여 배종률 결과의 차이를 확인하였다. 그 결과 경도 $10{\pm}2$의 실리콘 재질에 지름 14mm이상에서 90%이상의 높은 배종률을 보여주었다.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.175-181
• /
• 2001

In compliance with the Industrial Safely and Health Acts, the owners/users have performed self-inspection at regular intervals to secure safety in the use of hazardous machinery, equipment and facilities However, securing safety, which is the goal of self-inspection, has not been thoroughly understood in most small businesses and factories. The objective of this research is to analyze the importance and effects of self-inspection in preventing accidents in businesses and factories that use hazardous machinery and facilities. The result shows that self-inspection has made a good contribution to the prevention of accidents. Most businesses and factories that responded the survey answered they have improved safety in the use of machinery and facilities through self-inspection, though the ways of self-inspection were not all the same. However, the result also reveals that there are rooms for further improvement in the areas of self-inspection intervals, self-inspection methods and the selection of self-inspection objects. This improvement is necessary to improve the effect of self-inspection and to minimize regulations of the government on business activities.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.205-218
• /
• 1995

The trends of economic business environment have been changed to the ultimate competion, diverse market and need of new technology. To enforce the international competitive power, continuous technology innovation should be propelled. But the characteristics of small and medium company make it hard to get lead of market share. The industry of transportation and stevedoring machinery also have the same situation as small and medium company. This paper try to present the way of competitive power. The Strategic technology innovation for the industry of transportation and stevedoring machinery consists of product strategy, process design strategy, infra-structure strategy and R&D. There are benefits and shortcommings to get the competitive power for the industry of transportation and stevedoring machinery. Therefore the onclusion presented that capital for reverse engineering, export policy, human resource, thechnical cooperation with the institutions are required.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.376-379
• /
• 1993

GoldStar Industrial Systems Co. R & D center successfully developed the inverter for welding under the support of GoldStar Electric Machinery Co. Now, we are currently working on the mechanical part of articulated robot and a high-performance general purpose motion controller. By combining the above three items, we will be able to constitute the complete welding robot system on our own. In this article. the welding robot system currently under developing is introduced. The main focus will be placed on the development of general purpose motion controller with welding control module. Therefore, the architecture of welding robot controller where the general purpose motion controller is combined with the welding controller module will be explained. Here, the software system will be explained with regard to the hardware system.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.42-48
• /
• 2020

The agricultural tractor is a multi-purpose vehicle, which is frequently used in the agricultural field. It must be highly reliable in terms of human safety. Design and analysis of agricultural tractors must be performed using actual agricultural workload to maintain high reliability. Additionally, the frequency with which various components and systems are used must also be taken into consideration. In this study, a tractor is built to measure its workload in the actual field. Further, the measured load was analyzed for various farming tasks. The range of ratios of consumed power to engine power was measured to be 42.6%-87.2%, 75.1%-97%, 26.5%-59.2% for a plow, rotary, and harvest tasks, respectively. The results were fed into a transmission simulation model to analyze the strength and life of the transmission components. We conclude that a more reliable product can be constructed by incorporating the transmission analyses using the actual load.

• 아태비즈니스연구
• /
• 제3권2호
• /
• pp.1-7
• /
• 2012

The purpose of this case study is to discuss the issues and challenges pertaining to industrial safety. The case study begins with the shocking incident of the brutal killing of top-executive of the company by agitated workers. Inspite of having conducive environment for business, Italian subsidiary Robusto Muro Ltd had to confront industrial Relations issues at an incredible and unprecedented level. Management perspective, workers viewpoint, competitors approach and diplomatic comments by political bigwigs have also been incorporated so that the students may have 3-dimensional understanding of the scenario. The case of such genre will facilitate the students to comprehend and discuss the employee-employer relationship and industrial safety, in particular and industrial relations and IR machinery, in general.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권1호
• /
• pp.65-70
• /
• 2018

As technological development is progressing recently, various technologies are actively being studied in the course of the 4th industrial revolution. So, even in the educational field, virtual reality and augmented reality technology are used in educational environments, but specialized additional equipment is required and the price is very expensive. Also, since a plurality of equipment are required for a large number of people, it is urgent to study the technology that can be effectively applied to the industrial education field. So in this paper, we propose an industrial training system for HMD-AR, MPEG-DASH and SOAP based HTTP based Live Machinery Operation using Smartphone to solve the problems of existing system.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.31-37
• /
• 2020

We are concerned with the dual-arm manipulation for disaster-responding special-purpose machinery. This paper presents a control strategy for performing complex work in an irregular environment, the control algorithm, the hydraulic circuit, and the master devices. The occurrence of collapse accidents at disaster sites such as natural disasters and building collapses is increasing, which is emerging as a social problem. In particular, for the initial response, various tasks must be performed in an irregular environment. The Marionette algorithm for intuitive control of 'as if the operator's arm is moving' was presented as a control strategy for dual-arm manipulators with attachments and the prototype. Next, the hydraulic circuit, control system, and wearable-type master device presented to implement the Marionette algorithm were explained and verified through an experiment in which rebar-cutting, drum-lifting, and lifting a bottle with one arm and pouring the water into the bucket with the other arm were tested.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.185-192
• /
• 2016

Low operational cost and high efficiency is absolute requirements in the mass production of the ship engine. Increasing the performance of the fuel injection system in the diesel engine is one kind of solution to improve the efficiency. Modern diesel engines are using electronic control module as the main controller in the fuel injection control system, however the mechanical system still involved in the modern control system. In modern ship engine, a control valve was used in injection fuel to regulate the flow of the fuel. High pressure and friction are intensively occur within this part, therefore high wear resist and low friction coefficient material including fine lubricating are needed. This study is to figure out the wear resist material and proper lubricant in the control valve fuel injection. The experiment has been tested using pin on disk in several treatments those are used various lubricants and non-lubricant condition. Two kinds of lubricant were used in this experiment such as INDERIN AW-32 and paraffin oil. INDERIN AW-32 has a better result compared to non-lubricant condition, which are 20% performance increases than non-lubricant condition. SCM 440 was providing small friction coefficient in the lower velocity. The friction coefficient was constantly maintains at 0.1 m/s of velocity or above respectively with the increment of the loads. Using INDERIN AW-32 and paraffin oil the lowest friction coefficient occurred at the lower load, and increases side by side with the increment of loads.