• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.640-647
• /
• 2018

Many harbor structures have been constructed, and some structures are now under construction in Korea, which is a peninsular state and a logistics hub in Northeast Asia. Expansions and extensions of existing harbors are also being planned to meet increasing natural disaster threats. Wave-dissipation concrete blocks are recycled or discarded based on the personal experience of engineers only, and there are no safety checks or criteria. To check the safety of used blocks, material evaluations were done by visual inspection of blocks on the ground and under water and from 20 non-destructive measurements of the rebound hardness test and 3 concrete core samples. Wave-dissipation blocks are sometimes fully or partially damaged in the process of transferring and mounting them or during construction. Therefore, a safety check is essential for recycling blocks with an evaluation of materials while considering the construction phases. To do this, a block was modeled with a 3D finite element method using ADINA, and impact analyses were done according to the transfer, mounting, and construction phases. From the results of the impact analyses and material evaluation, the safety checks and reasonable evaluation of used blocks were examined, and detailed construction methods are proposed. The methods are expected to maximize the reuse of used wave-dissipation blocks from an economical point of view.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.496-503
• /
• 2020

The regeneration of Incheon Inner Port is a recent, representative case of conflict related to urban policies. This study aimed to analyze the conflicts that have arisen during the urban regeneration process. This study was a qualitative study, and the conflict management strategy was derived by analyzing the conflict process, subject, and content. The results of the analysis are as follows. First, central governmental agencies have proposed a clear plan that is mainly focused on the port redevelopment project through the participation of private sector businesses. Second, Incheon is pursuing a new vision called "Creative City" with specific urban regeneration. Third, the Incheon Port Authority is required to maximize the efficiency of the regeneration projects. Fourth, organizations such as port logistics companies and port trade unions are demanding the use of port space. Fifth, local residents and civic groups insist that the entire Inner Harbor should be returned to the citizens. Therefore, the establishment of city planning and administrative guidelines is necessary to manage Incheon Inner Harbor and surrounding areas in a desirable manner in order to develop a regeneration philosophy for Incheon Inner Harbor. Furthermore, the establishment of cooperative governance is required for the participation of various stakeholders.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.709-719
• /
• 2010

As the world has had a high recognition of security since 9/11 attacks in 2001, many countries and international organizations around the world are making strenuous efforts in establishing stronger security, centering on areas with high possibility of terrorist attacks. In particular, harbor facilities where a great deal of trade take place between countries, have high possibilities of becoming the objects of terrorist attacks and also of becoming places of trading objects and illegal items which might be leveraged for terror attacks. In this study, I have explained the current status of the harbor entrance system through existing documents, interviews and field trips to harbors and have also introduced improvement measures using RFID technology from the viewpoint of BP(Business Process). I expect that this study will be used as basic materials because I have studied the number of people entering harbors and working procedures for vehicle entrance, which have not been studied so far and also laid out various factors to be considered to introduce RFID technology.

• Journal of Distribution Science
• /
• v.9 no.4
• /
• pp.15-27
• /
• 2011

Although a huge number of academic researchers have paid considerable attention to exploring both the degree to which store image influences retailer brand customers and how to develop store personality, they have overlooked the contemporary retail context in which retailers have developed many different types of retailer brands, that is, price-oriented or quality-oriented retailer brands. Rather than focusing on the latter, much literature has looked at the former. Accordingly, even though there are many articles related to store image, a few authors have shown their interest in identifying the extent to which store personality affects customers purchasing retailer brands at lower prices. As a result, their efforts have been to illustrate the relationship between store image and consumer behaviours buying retailer brands. In that multiple retailers over the world such as E-Mart, Lotte-Mart, Tesco Korea and Tesco UK have actively introduced not only the quality-focused retailer brands that quality is better than, or equal to national brands, and prices are slightly higher than, or equal to them, but also price-focused retailer brands, academicians should make an effort to investigate how store image affects customers purchasing a quality-oriented retailer brand, comparing with previous research results. That is why the authors illustrate the extent to which store personality components influence retailer brand customers, including particularly quality-oriented retailer brand customers through an empirical research. By adopting a questionnaire method as a research technique to illuminate the relationship between store image components and retailer brand customers, research validity increases and further, data gathered through a field survey are analysed through a few statistic analysis methods, in order to minimise statistical deviations. Compared with the prior research concentrated on price-focused retailer brands, the authors have significantly shed light on customer behaviours purchasing retailer brand products with higher quality. When it comes to store personality components, the research suggests the following five items: merchandise attributes, services, physical facilities, promotions, and institutional image, considering the subcomponents mentioned by the previous research. Proposing the conceptual research model which those elements are differently hypothesised, according to retailer brand types: PR (Price-oriented Retailer brand) and QR (Quality-oriented Retailer brand), the research is proceeded. Through empirical research, the authors found that amongst the five items, only promotion influenced retailer brand customers in the Korean retailing marketplace, unlike other countries explored by many researchers, such as UK. Although much literature emphasises that those elements are closely related to retailer brand buying proneness, it is completely not fit to the Korean market. Also, research findings provide new insights into the degree of store image effects on retailer brand customers for academiciansand practitioners. Whether the retailer brand development program that a retailer has carried simultaneously both price-focused and quality-focused retailer brand types is practically profitable should be explored in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.9-16
• /
• 2016

Wireless sensor networks (WSN) are composed of sensor nodes and a base station. The sensor nodes deploy a non-accessible area, receive critical information, and transmit it to the base station. The information received is applied to real-time monitoring, distribution, medical service, etc.. Recently, the WSN was extended to mobile wireless sensor networks (MWSN). The MWSN has been applied to wild animal tracking, marine ecology, etc.. The important issues are mobility and energy consumption in MWSN. Because of the limited energy of the sensor nodes, the energy consumption for data transmission affects the lifetime of the network. Therefore, efficient data transmission from the sensor nodes to the base station is necessary for sensing data. This paper, proposes an energy consumption model using two-tier clustering in mobile sensor networks (TTCM). This method divides the entire network into two layers. The mobility problem was considered, whole energy consumption was decreased and clustering methods of recent researches were analyzed for the proposed energy consumption model. Through analysis and simulation, the proposed TTCM was found to be better than the previous clustering method in mobile sensor networks at point of the network energy efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.1-9
• /
• 2017

Recently, the active research into wireless sensor networks has led to the development of sensor nodes with improved performance, including their mobility and location awareness. One of the most important goals of such sensor networks is to transmit the data generated by mobile sensors nodes. Since these sensor nodes move in the mobile wireless sensor networks (MWSNs), the energy consumption required for them to transmit the sensed data to the fixed sink is increased. In order to solve this problem, the use of mobile sinks to collect the data while moving inside the network is studied herein. The important issues are the mobility and energy consumption in MWSNs. Because of the sensor nodes' limited energy, their energy consumption for data transmission affects the lifetime of the network. In this paper, a mobile-sink based energy-efficient clustering scheme is proposed for use in mobile wireless sensor networks (MECMs). The proposed scheme improves the energy efficiency when selecting a new cluster head according to the mobility of the mobile sensor nodes. In order to take into consideration the mobility problem, this method divides the entire network into several cluster groups based on mobile sinks, thereby decreasing the overall energy consumption. Through both analysis and simulation, it was shown that the proposed MECM is better than previous clustering methods in mobile sensor networks from the viewpoint of the network energy efficiency.

• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.91-105
• /
• 2014

The objective of this study is to analyze the project performance and development process of the phase 1 project of GFEZ from 2004 to 2010. The phase 1 project from 2004 to 2010 is consist of eleven project zones. Among these zones, eight zones are currently underway and three zones have been completed. The performance of the phase 1 projects is no so much because it were stated later than planning with the difficulty of business developers selection. The major performances are development and supply of industrial & residential land, construction of road and railway, investment promotion of 102 companies, and creation of 20,971 new jobs. Most of the direct invested companies were located at Gwangyang and Yulchon Districts, and were mainly logistics and related service, iron and steel, machinery, shipbuilding, and fine chemicals. The main problems, however, are the limit of promotion of high-tech industries and large firms, low FDI reported rate, difficulty of superior business developers, delayed business progress of Hadong district. Therefore, efforts to solve these problems are required for the success of GFEZ.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.64-72
• /
• 2008

Recently security is being an important issue in almost every field of industry. This situation has affected port logistics industry deeply. Ports are now leaving operational methods that only focus on productivity, and shifting to new ones which focus on safety and customer services on the basis of it. Thus a lot of companies and institutions have offered various solutions as this issue becomes more and more intense. Among them, most typical solutions involve installing special devices to ordinary containers to improve its security, such as CSD (Container Security Device) of GE (General Electric) and eSeal of Savi Networks. On the other hand, these devices focus only on international standards or technical implementation, and this causes inconvenience to actual users like cargo owners, sea carriers, or stevedoring companies. This is considered to be due to lack of sufficient consideration on user demands. This research uses QFD (Quality Function Deployment) method for deducting system requirements in order to solve the problems of previous security devices and to develop a security system that can not only reflect the demands of the users but also considers real-world conditions. According to the QFD results, a total of 21 system CTO's were deducted under 5 categories.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.80-87
• /
• 2018

In recent years, due to the spread of various renewable energy power sources and the pursuit of high efficiency and low-power consumption, not only trends in the electric power industry but also the consumption, control methods, and characteristics are diversified. However, in this diversified electric power industry, the fuse (which is the core part responsible for safety) has not developed significantly in classical operation mode, and thus, fires continue to occur. In this paper, the effects of low melting-point metal plating and high melting-point metal plating on operating characteristics and IT curve movement of the fuse are investigated in a cartridge fuse, which is a classic fuse manufacturing method. The effects of plating on the thickness of the fuse are investigated, and various operating characteristics of the fuse are implemented. In addition, it is suggested that the plating of the low melting-point metal moves the rated current line of the fuse to a low rating, and moves operating characteristics to characteristics of delay operation. It is possible to design various operating characteristics using this characteristic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2604-2611
• /
• 2013

The Personal Rapid Transit(PRT) system has been highly interested in future transportation developments due to its on-demand and optimized door-to-door transport capability. However, the major impediments to the commercialization of PRT are the high cost for construction of infrastructures as opposed to the small transport capacity and difficulty in defining the role of PRT in building a balanced transportation system. In this study, the vertical transfer device for the PRT vehicle is developed to provide more flexible and better compatible urban mobility services between means of transportation, which is expected to meet particular demands in a particular environment. This apparatus was initially designed based on the basis of vertical circulating conveyors with steel chains, which is frequently used in logistics. Its advantages are capable of the non-stop loading and reduced head-way time. Most importantly, it was intensified by the additional idea to ensure the stable and reliable transfer of the PRT vehicle fully loaded with passengers. The 1/10-scale prototype was successfully tested to demonstrate a fundamental mechanism of vertical transfer and identify unexpected user requirements prior to a real manufacturing process.