• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.4
• /
• pp.30-38
• /
• 2007

In this study, we propose an RFID based container terminal operation process. Field tests are conducted for 900 MHz (truck identification) tag and 433 MHz RFID (container identification/e-seal) tag at an Incheon container terminal to verify possibility of applying RFID in the container terminal gate. To evaluate effect of applying RFID in the container terminal operation, simulation models for current and RFID based container terminals are developed using ARENA. Simulations are carried out using industrial field data and the result indicates that performance of the container terminal can be prominently improved after RFID application.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.4
• /
• pp.109-115
• /
• 2013

Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. $C_p$ and $C_{pk}$ are traditional PCIs. These are only considers of process variation. These are not given information about the characteristic value does not match the target value of the process. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. $C_{pm}$ is considers both the process variation and the process deviation from target value. And $C_{pm}{^+}$ is considers economic loss for the process deviation from target value. In this paper development of new process capability index that is Taguchi's quadratic loss function by applying the expected loss. And check the correlation between existing traditional process capability index ($C_{pk}$) and new one. Finally, we propose the criteria for classification about developed process capability index.

• Journal of Magnetics
• /
• v.7 no.2
• /
• pp.45-50
• /
• 2002

A magnetic field annealing is firstly used for nanostructured Sm-Co/Co films, prepared by magnetron sputtering method. The effects of magnetic field annealing on single-layered Sm-Co films are different from those on multi-layered Sm-Co/Co films. A detailed analysis of microstructures and magnetic properties is made by means of HRTEM, Auger electron spectroscopy, XRD and Physical Property Measurement System (PPMS). From magnetic properties and microstructure analysis, it was confirmed that these differences originate from the effects of magnetic field annealing on crystallization behavior of the films. The relationship between magnetic properties and microstructures explains a different demagnetization process of single-layered and multilayered films. For the single-layered Sm-Co films, magnetic-field-annealing makes the main phases change from $CaCu_5/ to Zn_2Th_{17}$ structure, resulting in a decrease of coercivity. The results show that the magnetic-field-annealing is useful to improve the properties of nanostructured Sm-Co(30 nm)/Co(10 nm) films, which ascribe to improving the pinning effectiveness in coercivity mechanism and decreasing the magnetostatic interaction of films. A very high coercivity about 0.7 T was obtained from nanoscaled multi-layered Sm-Co(30 nm)-/Co(10 nm) films.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2007.02a
• /
• pp.58-60
• /
• 2007

The availability of Information Technology in geological and engineering geological fields is rapidly increasing in Korea. Especially GIS-based hazard mapping is the most distinctive part to predict a possibility of landslide occurrence. Integrated expert system for tunnel construction is also practically used to manage investigated or designed data and to predict un-known underground geological condition. Computer-based field data acquisition tools are also one of the typical part using information technology including GIS combined with mobile phone in Geological field.

• Journal of vocational education research
• /
• v.36 no.1
• /
• pp.23-46
• /
• 2017

The purpose of this study is to analyze the personality level of industrial-field specialized high schools and Meister high schools. The study objective for this is to analyze the differences per background variable and personality level of students of industrial-field specialized high schools and to analyze the differences per background variable and personality level of students of industrial-field Meister high schools. The study result is as follows. First, students of industrial-field specialized high schools showed personality level above normal in all 10 virtues, but this value fell short of the average for high school students suggested in Hyeon et al(2014). Second, students of industrial-field Meister high schools showed personality level above normal in all 10 virtues, and compared to the average for high school students suggested in Hyeon et al.(2014), categories of consideration and communication, manners, honesty/courage, and justice showed values below average. Third, students of industrial-field specialized high schools and Meister high schools showed differences in personality level according to nurturing style of parents, respect for teachers, stress for academic achievement, and school satisfaction, and additionally, students of Meister high schools showed differences in personality level according to career plans. That is, when the student perceived his/her parents to put higher value on his/her happiness rather than academic achievement, when the student respected the teacher, and when the student was more satisfied with te school life, the student showed higher personality level, and in case of students of Meister high schools, the student with detailed plan for his/her career showed high personality level than the student who has not yet decided on his/her career.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.155-158
• /
• 1997

In design of current transformer, equivalent circuit parameters is obtained by electromagnetic analysis and used circuit simulation. Precise core secton area and turns of coil can be determined by circuit analysis. Therefore exact design of current transformer is possible by field and circuit analysis.

• Progress in Superconductivity
• /
• v.5 no.2
• /
• pp.128-131
• /
• 2004

The resistive superconducting fault current limiters (SFCLs) are very attractive devices for the electric power network. But they have some serious problems when the YBCO thin films were used for the current limiting materials due to the in homogeneities caused by manufacturing process. When the YBCO films have some inhomogeneities, simultaneous quenches are difficult to achieve when the fault current limiting units are connected in series for increasing operating voltage ratings. Magnetic field application is one of the prospective way of inducing simultaneous quenches far the series-connected resistive FCL components. Magnetic field was typically generated by the fault current thorough a coil, which is connected to components of the fault current limiter in series, leaving the problem, which provides significant inductance to the power line and suppresses critical current density of the superconducting components. In this article we investigated the possible application of the protective current transformer (p-CT), which is available current source to the magnetic coil. This system inductively coupled to the circuit, therefore, remarkably reducing impedance to the circuit. The current by the protective current transformer was directly fed to the coil, generating magnetic field large enough to reduce critical current density of the components. This successfully induced simultaneous quenches of the series-connected resistive FCL components.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.128-154
• /
• 2006

In the knowledge-based society, the quality of education is the core factor of national development. Above all, for improving educational quality, it is important to advance teacher's quality. Therefore, in order to maintaining high-level quality of education, it is required to select and appoint competent teacher. It deserves emphasis on importance of teacher recruitment test for maintaining high-level quality of education in this changes of age. Specially, Secondary School Teacher Recruitment Test of Electricity Electronics Communication Subject is declined qualitatively as each Subject of Electricity Electronics Communication is integrated and criterion of examination is obscured. This research analyzed The seventh curriculum and curriculum of Institution of Teacher Education of Electricity Electronics Communication Subject and already known examination of it On the basis of analyzing result, A field, proportion and points of examination decided through a expert conference are as follow: first, Teacher Recruitment Test of Electricity Electronics Communication Subject consists of subject pedagogics and contents. a proportion of subject pedagogics is 20% and subject contents is 80%. second, a subfield of subject contents consists of industrial education, industrial curriculum, industrial instruction method, practical guidance method, management of practical field organization, assesment of industrial education, industrial-educational cooperation and vocation and career education. third, subject contents consists of a common special, foundation special and application special field. a common a proportion of special field is 7.4%, foundation special is 20% and application special field which consists of electric field(21.3%), electronic field(21.3%) and communication field(10%) is 52.6%. fourth, Teacher Recruitment Test of Electricity Electronics Communication Subject execute practical technique test after finishing writing test.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.21-26
• /
• 2011

Initial reliability prediction done by calculation would be more practical if support by evidence from customer usage profile and field failure data to improve the prediction. Thus, the consistency of the design and the product would be practically validated. In this paper, it will address rationale and method to decide on Acceleration Factor (AF) to be used in Accelerated Life Test (ALT) through usage profile and field failure. The case study of tractor transmission is used to demonstrate the method which data obtained from surveys done on farmers, field visits and field failure data from service center. By considering all the elements, it will determine more relevant AF which indicates the real use conditions of the component.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.18 no.4
• /
• pp.305-316
• /
• 2014

The Hodge-Helmholtz decomposition splits a vector field into the unique sum of a divergence-free vector field (solenoidal part) and a gradient field (irrotational part). In a bounded domain, a boundary condition needs to be supplied to the decomposition. The decomposition with the non-penetration boundary condition is equivalent to solving the Poisson equation with the Neumann boundary condition. The Gibou-Min method is an application of the Poisson solver by Purvis and Burkhalter to the decomposition. Using the $L^2$-orthogonality between the error vector and the consistency, the convergence for approximating the divergence-free vector field was recently proved to be $O(h^{1.5})$ with step size h. In this work, we analyze the convergence of the irrotattional in the decomposition. To the end, we introduce a discrete version of the Poincare inequality, which leads to a proof of the O(h) convergence for the scalar variable of the gradient field in a domain with general intersection property.