• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.758-760
• /
• 1999

To promote fuzzy logic in industrial applications, the German Association of Mechanical and Electrical Engineers(VDI/VDE) established the work group UA451, focusing on "Fuzzy Logic and Fuzzy Control" in 1991. The group focuses on two activities: providing information platforms for designers to exchange project experiences and fuzzy logic standardization. This article presents some of the intermediate results of the standardization activities and discusses future standards for fuzzy logic systems.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.225-231
• /
• 2016

Peak load rate(i.e., maximum daily flow/average daily flow) has not been considered for industrial water demand planning in Korea to date, while area unit method based on average daily flow has been applied to decide capacity of industrial water treatment plants(WTPs). Designers of industrial WTPs has assumed that peak load would not exist if operation rate of factories in industrial sites were close to 100%. However, peak load rates were calculated as 1.10~2.53 based on daily water flow from 2009 to 2014 for 9 industrial WTPs which have been operated more than 9 years(9-38 years). Furthermore, average operation rates of 9 industrial WTPs was less than 70% which means current area unit method has tendency to overestimate water demand. Therefore, it is not reasonable to consider peak load for the calculation of water demand under current area unit method application to prevent overestimation. However, for the precise future industrial water demand calculation more precise data gathering for average daily flow and consideration of peak load rate are recommended.

• 대한산업공학회지
• /
• 제29권4호
• /
• pp.271-282
• /
• 2003

Automotive occupant packaging has been a part of main ergonomics interests, especially, in terms of driver's posture. Previous research on driver's posture has mainly focused on the initial optimal posture for driving sedans. However, customer preferences on cars are shifting from sedans to RV and automobile manufacturing companies seek to understand temporal changes in drivers' posture according to driving environment. So the main aim of this study was to develop a driver's posture measurement system during driving and investigate casual changes due to duration, car type, traffic flow. Four male drivers participated in the experiments during one week. It was shown that considerable changes in their postures were caused with respect to driving environment, which implies that not only static optimal postures but their dynamic changes should be taken into consideration for proper design and evaluation of interior packaging. The research is expected to help packaging designers understand human drivers so as to improve their comfort.

• 대한산업공학회지
• /
• 제27권2호
• /
• pp.203-213
• /
• 2001

The image and impression characteristics of the consumer electronic products have become an important factor in purchasing decisions. This study aims to analyze and interpret the image and impression characteristics based on the consumer preference survey. The survey consisted of two parts. First part was to measure the predetermined 52 design variables that can represent the design variables of the products. In the second part, 60 subjects were requested to evaluate 36 audio/video electronic products on 25 different image attributes such as luxuriousness, attractiveness, and granularity. In this study, empirical data from the survey were analyzed through various multivariate analysis and ANOVA analysis. Additionally, this study suggested a statistical procedure that can be applied to select and/or screen critical design variables. It is expected that the results of this study can provide practical information to the designers of consumer electronic products.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.325-332
• /
• 1998

In the context of total quality management, customer satisfaction is a key factor of success. Customer needs have been in the past described with rather vague words. In order to lead in the competitive market, product designers must be willing to interpret and reflect customer perceptions of a product on the design. The objective of this research is to develop a systematic process capable of linking customer preferences on a product to the design of product elements or specifications. The design process consists of multivariate statistical analyses, semantic differentials, and multidimensional scaling techniques under the framework of a methodology known as quality function deployment which is frequently used to construct a quality design process. The process being established is expected to serve as an effective means to communicate between the customer and the designer through proper representational schemes of design elements.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.236-239
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.59-67
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 산업공학
• /
• 제18권3호
• /
• pp.297-307
• /
• 2005

PCB assembly is a complicated and difficult process to optimize due to the necessity of simultaneous consideration of component’s rack assignment and board mounting sequencing. An efficient PCB assembly method is developed by using neighboring positioned identical components information as well as quantity and size of the components. It is found that same type of components are located closely each other by checking real PCBs and interviewing with PCB designers in practice. Better performance of the developed procedure is obtained along with more number of total components and more number of neighboring positioned identical components cases. Simulation models are developed using Visual C++ for performance evaluation purposes of the suggested heuristic.

• 산업기술연구
• /
• 제27권A호
• /
• pp.185-193
• /
• 2007

The object of this study is the development of a Method which is enable to review the preliminary feasibility for co-generation system in new apartment buildings. In Korea co-generation systems have been installed in most of large industrial plants and commercial buildings which consume a large quantity of electric and heat energy, for energy saving and cutting products cost, under positive governmental supports. However for apartment buildings which consume quite a large electric and heat energy, are still remained in conventional energy supply system, and are not popular to utilize useful co-generation system. One of the major reason for these is the lack of clear and easy justification tool. In this circumstance, this study can provide a tool to verify the feasibility of co-generation in apartment buildings with this handy tools for planners and designers beforehand.

• 한국의상디자인학회지
• /
• 제1권1호
• /
• pp.141-156
• /
• 1999

This paper is to analyze the classification of textile pattern design focusing on the 19th century in England. The purpose of this study is. firstly to research the thoughts and ideas of these design in the time of mid-Victorian age; Secondly. to classify the textile pattern design from many points of view. We could find such William Morris's thought and ideas of 19th century to reform from textile pattern design. We wish to use these studies for textile pattern designers to develop this tradition onward to modern and future trends.