• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.164-165
• /
• 2019

Light-weight foamed concrete using cement as a raw material consumes a lot of energy and generates $CO_2$ because of the high temperature firing process in the manufacturing process of cement. This study was carried out to evaluate the use of blast furnace slag through the properties analysis by substituting a certain amount of blast furnace slag as an industrial by-product as a substitute for cement. The experimental results showed similar characteristics to those of using only cement when the blast furnace slag fine powder was used in an appropriate amount. Therefore, if a certain amount of cement is replaced with blast furnace slag powder, it can maintain similar quality, reduce natural resources and energy consumption, and reduce carbon dioxide emissions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.47-48
• /
• 2023

In the domestic industrial sector, greenhouse gases emitted from the cement industry account for about 10%, with most of them generated during the cement clinker calcination process. During the calcination process, 57% of carbon dioxide is emitted from the decarbonation reaction of limestone, 30% from fuel consumption, and 13% from electricity usage. In response to these issues, the cement industry is making efforts to reduce carbon dioxide emissions by developing technologies for raw material substitution and conversion, improving process efficiency by utilizing low-carbon alternative heat sources, developing CO₂ capture and utilization technologies, and recycling waste materials. In addition, due to the limitations in purchasing and storing industrial byproducts generated from industrial facilities, many studies are underway regarding the recycling of construction waste. Therefore, this study analyzes the manufacture of calcium silicate cement (CSC), which can store carbon dioxide as carbonate minerals in industrial facilities, and aims to contribute to the development of environmentally friendly regenerated cement using construction waste.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.213-217
• /
• 2007

Decomposition of benzene and selectivity of byproducts were investigated by using Dielectric Barrier Discharge (DBD) at atmospheric pressure. In order to increase the decomposition rate and selectivity of byproducts, two types of catalysts, H-ZSM-5 and Na-Y, were optionally employed inside the reactor of the process. The decomposition efficiency of benzene was investigated on the DBD and DBD/catalyst systems at various processing parameters including discharge voltage, residence time, and concentration of benzene. The results showed that, compared with the DBD only, the catalyst-assisted DBD process as a hybrid discharge type had an improved decomposition efficiency at the same process conditions of discharge voltage and residence time

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.643-650
• /
• 2009

Two metabolism trials were conducted with 24 wether lambs to investigate the effects of feeding crab meal and other protein supplements on N utilization, digestibility and Ca and P balance in sheep. The lambs (avg. BW, 25 kg) were randomly allotted to eight diets in each of two trials. The supplements were: i) none, negative control (NC); ii) soybean meal (SBM), control; iii) supplement based on industrial byproducts of both plant and animal origin (IPA); iv) experimental supplement based on byproducts of animal origin (ESA); v) hydrolyzed supplement No 4. (HESA); vi) commercial supplement based on animal protein (CS), $Pro-Lak^{(R)}$ vii) crab meal (CM); and viii) urea (U). The supplements supplied 33% of the total dietary N (CP, 9.8%; DM basis). Lambs fed the NC diet had lower (p<0.05) DM and OM digestibility. Lower (p<0.05) apparent absorption of N was recorded for the lambs fed the HESA and NC diets. Sheep fed CM had lower Ca absorption compared to SBM. Highest (p<0.05) P absorption was observed for lambs fed CS and CM and lowest for U and NC diets. Sheep fed CM had higher (p<0.05) total VFA concentration (65.7 ${\mu}mol/ml$), compared to those fed ESA, CS, and NC diets (47.3, 49.8, and 49.5 ${\mu}mol/ml$, respectively). Highest (p<0.05) ruminal $NH_3$ N (29.6 mg/dl) was observed in lambs fed the U diet, while those fed the NC diet had the lowest (p<0.05) average value (7.66 mg/dl). Lambs fed the U diet had the highest (p<0.05) blood urea N (10.67 mg/dl). The present study showed that N utilization of diets supplemented with experimental supplements based on feather meal and blood meal; commercial supplement based on animal protein, $Prolak^{(R)}$ supplement based on plant protein and blood meal; and crab meal are comparable with that of soybean meal.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.5
• /
• pp.467-472
• /
• 2017

There is increasing interest in developing flavor-enriched concentrate using byproducts of skipjack tuna Ktsuwonus pelamis as a replacement for commercial beef bone extract concentrate (CBB-EC). This study was compared on sanitary and nutritional characteristics between skipjack tuna frame extract concentrate (ST-EC) and CBB-EC as a control of skipjack tuna frame extract concentrate. The moisture contents of CBB-EC and ST-EC 41.4-4.9% and 45.3%, respectively. The results of viable cell counts and E. coli assays suggested that CBB-EC and ST-EC is a safe and sanitary for use in food. There were no differences in peroxide values among CBB-ECs. The total amino acid contents in CBB-EC and ST-EC were 25.6-29.3 g/100 g and 37.9 g/100 g, respectively, and the major amino acids present glutamic acid, proline, glycine, alanine and arginine. Regardless of kinds of the mineral, mineral contents of ST-EC higher than those of CBB-EC. The major fatty acids were 16:0, 18:0 and 18:1n-9 in CBB-EC, 16:0, 18:1n-9 and 22:6n-3 in ST-EC. These results can be used as background information to develop flavor-enriched concentrates from byproducts of skipjack tuna as replacement for CBB-EC.

• Clean Technology
• /
• v.9 no.1
• /
• pp.29-35
• /
• 2003

The methods for improving epichlorohydrin process was investigated by carrying out experiments on hypochlorination reaction, from which dichlorohydrin is produced by reacting with allyl chloride and chlorine. As the recycle water from PVC plant was used instead of industrial water for reaction, the effect of recycle water on the reaction yield was studied. It was shown from this experiment that the recycle water rarely affected on the ratio between products. TCPA, which was almost of byproducts, could be removed before purification process using "extractant A". This could prevent additional side reaction by TCPA and reduced energy to separate it in purification part. The change of product yield was observed as the chlorine gas addition decreases which reacted with allyl chloride. It seems that the yield of major products didn't change almost, but the byproducts showed rather reduced trend with decreasing chlorine gas.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.119-138
• /
• 2016

Objectives: The purpose of this study is to review size, shape, and crystal structure-dependent toxicity of major metal oxide particles such as silicon dioxide, tungsten trioxide, aluminum oxide, and titanium dioxide as byproducts generated in semiconductor fabrication facility. Methods: To review the toxicity of major metal oxide particles, we used various reported research and review papers. The papers were searched by using websites such as Google Scholar and PubMed. Keyword search terms included '$SiO_2$(or $WO_3$ or $Al_2O_3$ or $TiO_2$) toxicity', 'health effects $SiO_2$(or $WO_3$ or $Al_2O_3$ or $TiO_2$). Additional papers were identified in references cited in the searched papers. Results: In various cell lines and organs of human and animals, cytotoxicity, genotoxicity, hepatoxicity, fetotoxicity, neurotoxicity, and histopathological changes were induced by silicon dioxide, tungsten trioxide, aluminium oxide, and titanium dioxide particles. Differences in toxicity were dependent on the cell lines, organs, doses, as well as the chemical composition, size, surface area, shape, and crystal structure of the particles. However, the doses used in the reported papers were higher than the possible exposure level in general work environment. Oxidative stress induced by the metal oxide particles plays a significant role in the expression of toxicity. Conclusions: The results cannot guarantee human toxicity of the metal oxide particles, because there is still a lack of available information about health effects on humans. In addition, toxicological studies under the exposure conditions in the actual work environment are needed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.43-50
• /
• 2014

The cultivation of agricultural crops results in the generation of agricultural byproducts. Researchers have reported that these materials can be useful in a variety of applications. However, over 50% of them are currently discarded because of the lack of specific technologies in industrial applications. Therefore, effective and specific applications must be developed in order to manufacture high-quality materials using discarded lignocellulosic resources. In this study, we determined the possibility of using kraft pulp from major agricultural byproducts as a raw material for the manufacture of paperboard. Rice husks, peanut husks, and garlic stems were obtained and used to prepare many kinds of kraft pulps by controlling the active alkali, sulfidity, reaction time, and liquor ratio. After the production of these kraft pulps, handsheets were manufactured by mixing them with KOCC. After preconditioning, the physical properties and strengths of the handsheets were measured according to the TAPPI test methods. The shapes, lengths, and widths of the pulp fibers varied according to the type of agricultural byproduct and the kraft pulping conditions. Rice husk and garlic stem pulps manufactured under mild pulping conditions resulted in handsheets of higher bulk than other pulps. Garlic stem pulps manufactured under mild pulping conditions were stronger than rice husk pulps and peanut husk pulps.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.477-482
• /
• 2015

This study examined the adsorption characteristics of heavy metal ions ($Cr^{6+}$, $As^{3+}$) in an aqueous solution using recycled aggregate (RA) and recycled aggregate (RA)/steel slag (SS) composites. The RA and SS are favorable for the absorbent because it contains about 91% and 86.9%, respectively, which are some of the major adsorbent ingredients (CaO, $SiO_2$, $Al_2O_3$ and $Fe_2O_3$) for heavy metal. Kinetic equilibrium of $Cr^{6+}$ and $As^{3+}$ in RA and RA/SS composites reached within 180 min and 360 min, respectively. The kinetic data presented that the slow course of adsorption follows the Pseudo first and second order models. The equilibrium data were well fitted by the Freundlich model and showed the affinity order of $As^{3+}$ > $Cr^{6+}$. The results of $As^{3+}$ also showed that the adsorption capacity slightly increased with increasing pH from 6 to 10. Meanwhile, the adsorption capacity of $Cr^{6+}$ was slightly decreased. From these results, it was concluded that the RA and RA/SS composites can be successfully used for removing the heavy metals ($Cr^{6+}$ and $As^{3+}$) from aqueous solutions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.521-528
• /
• 1999

As the size of our industry and population inclose, the byproducts such as municipal solid wastes, industrial wastes are in the increasing phase. The treatment of such things is rising as a social problem. Today, the final disposal of these wastes depends mostly on the landfill, and the sanitary landfill is required and designed for preventing soil and groundwater contamination. Clays have been used for a liner material of a sanitary landfill, however, the high quality clay is hard to come by and quite expensive as a lining material in our country. Using the waste lime produced abundantly every year from chemical processes was studied here, made from the proper mixing of the bentonite and the waste lime meets the regulations from the USEPA. The soil property index tests (sieve analysis, specific gravity test Atterberg limit test) were performed, and at last to confirm the sorption characteristics of the bentonite and the waste lime the sorption isotherm equilibrium test and the sorption isotherm were performed with Toluene and Ethylbenzene which are the main components of the leachate from the landfill.