• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.49-50
• /
• 2023

The purpose of this study was to review ways to increase mechanical performance and apply to actual structures by reinforcing AL perforated sheets, which are industrial by-products generated after capacitor production, with mortar to reinforce the stress of structural members. The AL perforated sheet was reinforced so that it behaves integrally at the position receiving compression, tension, and bending stress. It was confirmed that the stress received by the AL perforated sheet increased according to the number of reinforcements, and as a result, the mechanical properties were improved.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.49-56
• /
• 2012

If cement can be manufactured with industrial byproducts such as granulated blast furnace slag, phosphogypsum, and waste lime instead of clinker, there would be many advantages, including maximum use of these industrial byproducts for high value-added resources, conservation of natural resources and energy by omitting the use of clinker, minimized environmental pollution problems caused by CO2 discharge, and reduction of the production cost. By this reason, in this study, mechanical behavior tests of non-burnt cement concrete were performed, and elasticity modulus and stress-strain relationship of non-burnt cement concrete were proposed. 6 test members were manufactured and tested according to reinforcement ratio and concrete compressive strength. By the test results, there was no difference between ordinary concrete and non-burnt cement concrete of flexural behavior. In order to verify the proposed non-burnt cement concrete model, nonlinear analytical model was derived by using strain compatibility method. By the results of comparison between test results, ordinary concrete model and proposed model, The proposed model well predicted the flexural behavior of non-burnt cement concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.115-121
• /
• 2012

If cement could be manufactured with industrial byproducts such as granulated blast furnace slag, phosphogypsum, and waste lime rather than clinker, there would be many advantages, including the maximization of the use of these industrial byproducts for high value-added resources, the conservation of natural resources and energy by omitting the use of clinker, the minimization of environmental pollution problems caused by $CO_2$ discharge, and the reduction of the production cost. For this reason, in this study, mechanical behavior tests of non-sintered cement concrete were performed, and elasticity modulus and stress-strain relationship of non-sintered cement concrete were proposed. Nine test members were manufactured and tested according to reinforcement ratio and concrete compressive strength. According to the test results, there was no difference between general cement concrete and non-sintered cement concrete in terms of flexure and shear behavior.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.10-15
• /
• 2016

In recent years, in terms of environmental protection and efficient use of the land, efficient utilization of byproducts and wastes generated in industrial areas are emerging. In this study, for the effective utilization of using ever increasing amount of utilizing sewage sludge incineration ash to increase sewage sludge, it is evaluated the use of as an construction material. After making concrete specimens, it is evaluated compressive strength, carbonation and environmental resistance. From the experimental results, compared with concrete without sewage sludge it is obtained satisfactory results for compressive strength and carbonation and results of the leaching test also satisfies the standard value. So, it is sufficient possibility using of concrete aggregate and the replacement rates is judged to be about 10%.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.74-81
• /
• 2019

In this study, to characterize the application of CSA and dihydrate gypsum Utilizing industrial byproducts, we investigated the characteristics of CSA and dihydrate gypsum to investigate the characteristics of Mine Liner according to the addition amount. As a result of compressive strength, length change and absorption rate of mining lime wastewater according to CSA addition amount, up to 30% of CSA showed a positive effect on shrinkage and absorption reduction effect as well as strength at initial age. However, due to excessive use of CSA 50%, it was reduced by 15% compared to OPC due to increase of absorption rate and decrease of cement amount due to over expansion rather than shrinkage compensation and void filling.

• Journal of Powder Materials
• /
• v.30 no.3
• /
• pp.233-241
• /
• 2023

In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.105-106
• /
• 2015

With an increase of concrete buildings as result of rapid industrialization, Remicon sludge, which is a strong alkaline construction waste, should be neutralized to prevent damage to a natural environment, and the cost of the neutralization processing is increasing as well. Accordingly, this study investigates the mechanical properties of cementless concrete which is processed with recycled water and industrial byproducts in order to determine the possibility of re-using sludge, recycled sand, and gravel which are contained in recycled water.

• Journal of the Korean Ceramic Society
• /
• v.15 no.3
• /
• pp.149-156
• /
• 1978

The utilization of waste and industrial byproduct materials, such as blast furnace slag, shales, poor coal and anthracite briquet ash, were investigated as a source of calcareous or argillaceous material in the manufacture of Portland cement. As a slag is similar to cement in chemical compoment and contains about 40∼50% of CaO, it's utilization in cement manufacture should be suitable. The burnability was increased and the heat of clinker formation was decreased by using slag. Some consideration should betaken in the use of large quantity because of sticking in suspension preheater kiln. Suitable quantities of colliery shales and poor coal should be useable in cement manufacture as a argillaceous materials and also its combustible materials should be utilized in cement manufacture. Anthracite briquet ash is also usable as a argillaceous source and it gives good burnability.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.265-266
• /
• 2018

In recent years, active loess cement has been used instead of cement in order to reduce the amount of cement and industrial byproducts that are the main cause of environmental pollution. We also used polysilicon sludge as a by-product to reduce the amount of cement used and to improve the environmental pollution due to the reduction of carbon dioxide. Polysilicon is a raw material used in the production of panels for solar power generation. When producing 1 ton of polysilicon, 2 tons of sludge is generated. It is an experiment to reduce sludge treatment and cement usage. This study analyzed basic characteristics of polysilicon sludge and active loess cement according to replacment ratio.

• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.3-9
• /
• 1998

The production of polyurethane polymer has been increased because of their unique properties and variety process methods available. The generation of their wastes also increases with products. These byproducts of industrialization seriously threaten the environmental demanding. Therefore, development of the recycling technologies have been required. The main propose of this study is to develop the recycling technology of waste polyurethane from a footwear scrap. This technique is composed of the following procedure : crushing, devulcanizing, pelletizing, washing and drying. The pellet was characterized with various methods. The recycled polyurethane(RPU) was blended with HIPS(high impact polystyrene) and investigated morphologically and rheologically. The experimental results showed that the addition of 20% HIPS to RPU was limited without mechanical performance of the superial properties of a virgin polyurethane. We believe that these technical information make possible to develop a rational engineering product.