• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.442-449
• /
• 1998

Freeze-dried cortical bones of the goat were transplanted to the experimental fibular defect of 10 dogs for valuating the possibility of xenogeneic bone implantation and the specificity of BM(Bone Morphogenetic Protein). The . freeze-dried cortical bone eliminated antigens and defatted with chloroform and methanol were freeze-dried at $-80{\circ}C$ for preservation of BMP and then sterilized with 50 gas and storaged in room temperature. Ten freeze-dried cortical implants of the goat were transplanted in experimentally defected regions of bilateral fibula of 5 dogs in clinically normal. The transplanted region had been radiographed for observing state of bone union and BALPOone Alkaline Phosphatase) in the serum of the host was measured for valuating activity of oteoblast per 2 week-interval after transplant procedures. New bone formation had been observed early in one of ten regions around implants about the same time as autoimplant regions. It was incorporated with its host bone during 4-12 weeks after transplantation. In another 2 cases of 2 dogs, new bone formation and absorption of implant had been observed from 4 weeks but they were not incorporated completely until 20 weeks. The rest of the freeze-dried bone implants, 7 cases of 4 dogs had not been observed new bone formation nor absorption of implants. The freeze-drying method for implants means to not influence bone incorporation. Although less of union percentages the union form of this experiment were similar to alloimplantation and it may mean to block immunity reaction that disturbs the bone induction by BMP. It demonsknted that the possibility of the xenogenous bone implantation is recognized by reason of the low specificity of BMP between goat and dog.

• Korean Journal of Veterinary Research
• /
• v.22 no.2
• /
• pp.265-272
• /
• 1982

The traumatic hepatitis and splenitis were experimentally induced in Korean native goats. General examinations, hematological and blood biochemical findings were investigated up to 10 days after induction of traumatic hepatitis and splenitis. Body weight of goats with traumatic hepatitis and splenitis showed no change or only a slight decrease. Changes in body temperature and respiratory rate were not noted in both experimental groups. Heart rate hart not been changed in traumatic splenitis group but were a little increased in traumatic hepatitis group. Erythrocytic series such as erythrocyte counts, hemoglobin concentration and packed cell volume showed same variation within normal range during the period of observation. Total leucocyte counts showed the considerable increase in both experimental groups. The increase of the percentage of neutrophil and the decrease of the percentage of lymphocyte were more remarkable in traumatic hepatitis group than that of traumatic splenitis group. Serum aspartate transferase activity was increased in both experimental groups after surgery, while serum alkaline phosphatase activity has been decreased conciderably up to 7 days after surgery. Serum lactic dehydrogenase activity has been increased up to 3 days after operation and thereafter the activity has returned to normal level in traumatic hepatitis group and the activity increased only the first day after surgery in traumatic splenitis group. There were no changes in total protein and albumin contents in both experimental groups during the period of observation. Serum total cholesterol contents showed a slight increase in both experimental groups and the range of increase in traumatic hepatitis group was more wide. Serum bilirubin contents were net changed in traumatic hepatitis group, but showed a slight increase in traumatic splenitis group.

• Korean Journal of Veterinary Research
• /
• v.45 no.4
• /
• pp.581-585
• /
• 2005

The purpose of this study is to establish the analgesic effects of electroacupuncture for Korean native goat. Electroacupuncture was applied to the 6 Korean native goats. In 3 of them, rumenotomy was performed, and in the other 3, laparotomy was done. The analgesic induction time was 15 to 30 minutes. The acupoints used were Tian-ping (Celestial Peace, GV-5), Bai-hui (Hundred Meetings, GV-20), left 13th thoracic nerve and left 3rd lumbar nerve. Electroacupuncture was performed in lateral recumbency. Needles were inserted 1-2 cm deep, and connected to the electroacupuncture apparatus. The electrical stimulation condition was 30 Hz and 2-6 volts. Initially, the voltage of analgesia mode was maximized in each channel. And, the output was slowly reduced to the critical point that goats could tolerate without obvious discomfort or pain. Surgical operation was done successfully under electroacupuncture analgesia in 6 Korean native goats. In addition, the changes of temperature, heart rate and respiratory rate were studied during acupuncture analgesia. For 3 months after surgery, no experimental animals showed clinical problem in 6 Korean native goats.

• Journal of Applied Biological Chemistry
• /
• v.62 no.4
• /
• pp.361-366
• /
• 2019

Isorhamnetin 3-O-glucoside, a member of the flavonol group, has been reported to be effective for inflammatory and ulcer, as well as to alleviate diabetic complications such as neuropathy, nephropathy and retinopathy. Isorhamnetin 3-O-glucoside has been extracted from several plants. Biotransformation is a valuable tool, which is used to produce value-added chemicals with inexpensive compounds. To synthesis isorhamnetin 3-O-glucoside from quercetin, two genes (PGT E82L and ROMT-9) were introduced into Escherichia coli, respectively. In order to synthesis isorhamnetin 3-O-glucoside from quercetin, a co-culture fermentation system was developed by optimizing the medium and temperature for biotransformation, the cell mix ratio, Isopropyl-β-ᴅ-thiogalactoside induction time, and quercetin feed concentration. Finally, isorhamnetin 3-O-glucoside was biosynthesized up to 181.2 mg/L under the optimized biotransformation condition, which was higher 4.7 times than previously reported (39.6 mg/L).

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1582-1588
• /
• 2010

A new alginate lyase gene of marine bacterium Streptomyces sp. M3 had been previously cloned in pColdI vector and transformed into E. coli BL21 (DE3). In this study, M3 lyase protein without signal peptide was overexpressed by induction with IPTG and purified with Ni-Sepharose affinity chromatography. The absorbance at 235 nm of the reaction mixture and TLC analysis showed that M3 alginate lyase was a polyG-specific lyase. When M3 lyase was assayed with substrate for 10 min, optimum pH and optimum temperature were pH 9 and $60^{\circ}C$. For the effect of 1mM metal ion on M3 lyase activity, $Ca^{++}$ and $Mn^{++}$ ions increased the alginate degrading activity by two-fold, whereas $Hg^{++}$ and $Zn^{++}$ ions inhibited the lyase activity completely. $Mg^{++}$, $Co^{++}$, $Na^+$, $K^+$, and $Ba^{++}$ did not show any strong effects on alginate lyase activity.

• Journal of Ginseng Research
• /
• v.34 no.4
• /
• pp.296-303
• /
• 2010

A peroxiredoxin cDNA (PgPrx) was isolated and characterized from the leaves of Panax ginseng. The cDNA is 716 nucleotides long and has an open reading frame of 489 base pairs with a deduced amino acid sequence of 162 residues. The calculated molecular mass of the mature protein is approximately 17.4 kDa with a predicted isoelectric point of 5.37. A GenBank BlastX search revealed that the deduced amino acid sequence of PgPrx shares a high degree homology with type II peroxiredoxin (Prx) proteins in other plants. The PgPrx gene was highly expressed in leaves, and expressed at a low level in the stem. To analyze the gene expression of PgPrx in response to various abiotic stresses, we utilized real-time quantitative RT-PCR. Our results reveal that PgPrx expression is induced by ultraviolet irradiation, low temperature, and salt. The induction of PgPrx in response to abiotic stimuli suggests that ginseng Prx may function to protect the host against environmental stresses.

• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.62-66
• /
• 1998

We have studied on the magnetic properties of the specimen with additives Bi$_2$O$_3$and$V_2O_5$ that sintered at 900 $^{\circ}C$ for 4 hours for sybthesizing optimal Ni-Zn-Cu ferrite. Curie temperature rises from 240 $^{\circ}C$ to 270 $^{\circ}C$ as Ni contents increase. Magentic maximum induction$(B_m)$ increases from 2650 G to 3300 G, 3500 G in the specimens with $V_2O_5$ and Bi$_2$O$_3$resectively. On the contrary coercive force $(H_c)$ lowers to 2.05 Oe~1.05 Oe. Permeability all increase in the specimen with additives. In the specimen with additive Bi$_2$O$_3$, we have obtained the low relative loss factor of $6.3{\times}10^{-5}~7.84{\times}10^{-5}$ in the range of 1MHz due to increase of resistivity in grain boundary. In the specimen with additive $V_2O_5$ in spite of increase permeability relative loss factor increase of due to decrease of Q-value.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.320-329
• /
• 2009

The purpose of this study was reducing the moisture accumulation in a wall, which can threaten the structural safety of light-frame wall and make residential environment poor. For the purpose, the laboratory test was carried out with different wall assemblies. Vapor retarder and air gap for ventilation were added to the typical wall. The improved performance of the proposed walls was examined through the test with distinct difference of temperature and relative humidity between outdoor and indoor air conditions. Increased dampproofing performance of additional vapor retarder was effective on reduction of moisture transmission from inside the house into the wall. However, unexpected high relative humidity was shown in the wall with two additional vapor retarder because of excessive dampproofing performance or inadequate location of vapor retarder. And, the open air gap induced the moisture transfer from inside the wall into outdoor air by ventilation. If the alternative to the induction of moisture transmission from inside the house into the wall with open air gap can be found, moisture reduction effect of that will be increased obviously.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.490-495
• /
• 1994

Enzymatic solubilization of tofu-residue was attempted using carbohydrase isolated from Aspergillus niger CF-34. Tofu-residue, by-product of tofu manufacture or soymilk processing was used as the model for plant cell wall. It was found that tofu-residue was rich in nurients: 46.7% carbohydrate, 32.8% protein, the rest being lipid and ashes. Carbohydrate component of tofu-residue consisted of 36.8% cellulose and 62.6% hemicellulose. The carbohydrase was found to consist of pectinase, xylanase, PGase, CMCase, and SFase when tofu-residue and pectin were used as the carbon source. Enzyme induction was maximum at 7days of culture. Optimum reaction pH was 4.0, temperature $50^{\circ}C$. The enzyme was stable to $50^{\circ}C$, above which the stability decreased rapidly.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.936-936
• /
• 2006

Bulk amorphous materials have been intensively studied to apply for various advanced industry fields due to their high mechanical, chemical and electrical properties. These materials have been produced by several techniques such as mechanical alloying, melt spinning and gas atomization, etc. Among them, the atomization is the most potential technique for commercialization due to high cooling rate during solidification of the melt and mass productivity. However, the amorphous powders still have some limitations because of their low ductility and toughness. Therefore, intensive efforts have to be carried out to increase the ductility and toughness. In this study, the Ni-based amorphous powder was produced by the gas atomization process. And in order to increase the ductile toughness, ductile Cu phase was coated on the Ni amorphous powder by spray drying process. The characteristics of the as-synthesis powders have been examined and briefly mentioned. The master alloy with $Ni_{57}Zr_{20}Ti_{16}Si_2Sn_3$ was prepared by vacuum induction melting furnace with graphite crucible and mold. The atomization was conducted at $1450^{\circ}C$ under the vacuum of $10^{-2}$ torr. The gas pressure during atomization was varied from 35 to 50 bars. After making the Ni amorphous powders, the spray drying was processed to produce the Cu -coated Ni amorphous composite powder. The amorphous powder and Cu nitrate solution were mixed together with a small amount of binder and then it was sprayed at temperature of $130^{\circ}C$ and rotating speed of 15,000 R.P.M.