• 설비공학논문집
• /
• 제15권2호
• /
• pp.116-125
• /
• 2003

The new HVAC system to lower the conveyance energy and building height using IAV (Increasing Air Volume) technique is developed. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy, size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 per-centage.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.1001-1008
• /
• 2003

A time-delay compensation method for vector control system is proposed that can compensate for voltage and current distortions resulting from a time delay in the overall system due to the low pass filter, hysteresis control inverter, microprocessor program computation time, and so on. The proposed scheme estimates the time delay using the difference between the Q-axis stator current command and the time-delayed actual Q-axis stator current in a synchronous reference frame, then compensates the time delay in the voltage and current using the angular displacement of a DQ transformation. Accordingly, the proposed scheme can accurately compensate for the time delay related to the overall system, thereby significantly improving the performance of the vector control system, as verified by simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.567-570
• /
• 2002

In variable speed wind power generating system connected in power grid, how to capture the maximum wind energy is most important thing Using the doubly fed induction machine as a generator in wind power generating system, it is possible to control the bidirectional slip power between grid and rotor side. This means that we can control the generating power under subsynchronous speed. To verify the theoretical analysis, computer simulation results using Psim program are presented to support the discussion.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.231-231
• /
• 2000

It is proposed that a novel method which can compensate the time delay occurs in overall system, when voltage and current is measured, owing to LPF, hysteresis control inverter and microprocessor program computation time. The Proposed scheme estimates the time delay using the difference between Q-axis stator current command and time delayed Q-axis stator current in synchronous reference frame, and compensates the time delay of voltage and current using angular displacement of DQ transformation. The proposed scheme compensates accurately the time delay occurs in overall system. Therefore performance of vector control system is improved highly and it is verified by simulation and experiment.

• 신재생에너지
• /
• 제6권4호
• /
• pp.41-49
• /
• 2010

Over the last decade, wind turbine industry has rapidly increased around world. These days many parts of the wind generators are induction generator. But it has some problems such as gearbox failure, rotor excitation and maintenance. Thus many manufacturers are considered permanent magnet synchronous generator named PMSG and direct drive. PMSG uses NdFeB magnet has many the advantage compare with induction generator. In this study, 3MW class outer rotor type PMSG for wind turbine is proposed. The generator features 2.6m stator outer radius, 1200mm stator length, 81 pole pairs, 14 rated rpm, 42kN/$m^2$ shear force density and 94.2% efficiency. Design and analysis generator using FEM program. Then calculate and derivate no load voltage, losses, conductor temperature. To reduce total harmonic distortion and cogging torque, the stator is applied the stator skewing. And to evaluate the designed generator, compare with other generators by active mass per rating torque and torque density.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권1호
• /
• pp.31-43
• /
• 2005

The new HVAC system is developed to lower the conveyance energy and building height using IAV(Increasing Air Volume) technique. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy. size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 percentage.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1013-1016
• /
• 2000

In this study, the estimate speed of rotor in the induction motor with Model Reference Adaptive control System (MARC) principle and to study that vector control system feedbacks speed estimated to speed control system and its result is as follows; Considering with explanation an influence of speed estimation mechanism depend on error about the second resistance size established, it estimates the deviation of the second resistance establishment and exhibits a compensation method, what is more, it designs a reparation program using the fuzzy algorithm and testifies the result with the computer simulation. And besides, it composes the load torque estimation and estimates the load torque, as the result, feedback-compensating the result of estimation, it improves the efficiency. In consequence, it makes a good result for more powerful vector control system about the outside trouble.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.58-62
• /
• 2004

The PWM inverter drive my cause motor terminals voltage surge and oscillation(ringing), which impose severe electric stresses on inter-turn insulation of motor windings. This paper describes the technique used to simulate the problems associated with the use of PWM ASD's(Adjustable Speed Drive) to drive induction motor. The characteristic of switching surge was analyzed by EMTP(Electromagnetic transient program) model. The effects of switching surge by surge impedance, rise-time and cable lengths are also discussed.

• International Journal of Oral Biology
• /
• 제46권2호
• /
• pp.74-80
• /
• 2021

Autophagy is an evolutionarily well-conserved cellular homeostasis program that responds to various cellular stresses and degrades unnecessary or harmful intracellular materials in lysosomes. Accumulating evidence has shown that autophagy dysfunction often results in various human pathophysiological conditions, including metabolic disorders, cancers, and neurodegenerative diseases. The discovery of an autophagy machinery protein network has revealed underlying molecular mechanisms of autophagy, and advances in the understanding of its regulatory mechanism have provided novel therapeutic targets for treating human diseases. Recently, reports have emerged on the involvement of autophagy in oral squamous cell carcinoma (OSCC). Although the role of autophagy in cancer therapy is controversial, the beneficial use of the induction of autophagic cell death in OSCC has drawn significant attention. In this review, the types of autophagy, mechanism of autophagosome biogenesis, and modulating molecules and therapeutic candidates affecting the induction of autophagic cell death in OSCC are briefly described.

• 생물환경조절학회지
• /
• 제28권2호
• /
• pp.178-184
• /
• 2019

딸기는 세계적으로 중요하고 인기있는 과채류이며 '설향'은 국내 시장에서 재배되고 있는 주요 품종 중 하나이다. 딸기의 생장과 화아 유도는 이 작물의 과실에 수량에 직접적으로 영향을 미치는 과정이다. 본 연구에서는 벤질아데닌(BA), 지베렐린 산($GA_3$), 살리실 산(SA)이 '설향' 딸기의 생장과 화아 유도에 미치는 영향을 조사하였다. 21구 트레이에서 번식된 지 3주가 경과한 런너묘를 온도는 $25^{\circ}C/15^{\circ}C$(주간/야간), 상대습도는 70%, 광원은 백색 LED, 광도는 $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}\;PPFD$로 유지되는 생장 챔버에서 재배하였다. BA, $GA_3$ 및 SA를 각 0(대조구), 100, $200mg{\cdot}L^{-1}$로 런너묘에 처리하였다. 이러한 생장조절제를 런너묘의 잎에 2주 간격으로 2회 엽면살포하였다. 9주 후의 생육을 비교한 결과, 생장조절제를 엽면살포한 모든 처리에서 대조구에 비해 근장과 엽록소함량(SPAD)이 감소하는 경향을 보였다. $GA_3$ 처리에서 엽록소함량(SPAD)이 가장 낮았다. 하지만 $GA_3\;200mg{\cdot}L^{-1}$ 처리에서 엽면적, 잎 생체중, 식물 생체중이 증가하였다. 화아유도율과 화수는 $SA\;200mg{\cdot}L^{-1}$ 처리에서 각 85%와 식물체당 4.3개로 가장 높았고 그 다음으로 $SA\;200mg{\cdot}L^{-1}$ 처리에서 높았다. 전체적으로 $GA_3$ 처리에서 식물 생장을 향상시켰고, SA 처리에서는 개화를 촉진하였다. 더 나아가 $GA_3$와 SA를 혼합한 처리를 추가한 연구를 수행하여 생장조절제간의 관계를 구명하고 그 결과에서의 분자 메커니즘과 관련된 반응을 조사하는 것이 필요하다고 판단된다.