• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1729-1734
• /
• 2016

The surface inspection of a steel billet is a common practice in the steel manufacturing process prior to hot rolling to produce steel wire for tire cord. This billet surface inspection is an important process because flaws on the surface may cause major failures during the product manufacturing phase. This paper presents a computer simulation based on a finite element method for a magnetic flaw detector with a function of the current intensity, the number of coil turns, and the billet proceeding speed during the production phase based on the typical condition of conventional apparatus. Based on the simulation result, the magnitude of the electromagnetic field on the surface diminished with distance from the electromagnet. In addition, the increased current intensity and the increased number of coil turns actually induced a stronger electromagnetic field on the billet surface. On the other hand, the proceeding speed of a billet in its production line had no significant effects. The result in this study may assist to reduce trial and error and to minimize the opportunity costs during the optimization process by applying the findings of this study into the operation condition in the steel billet production line.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.351-361
• /
• 2019

Present article deals with the static stability analysis of compositionally graded nanocomposite beams reinforced with graphene oxide powder (GOP) is undertaken once the beam is subjected to an induced force caused by nonuniform magnetic field. The homogenized material properties of the constituent material are approximated through Halpin-Tsai micromechanical scheme. Three distribution types of GOPs are considered, namely uniform, X and O. Also, a higher-order refined beam model is incorporated with the dynamic form of the virtual work's principle to derive the partial differential motion equations of the problem. The governing equations are solved via Galerkin's method. The introduced mathematical model is numerically validated presenting a comparison between the results of present work with responses obtained from previous articles. New results for the buckling load of GOP reinforced nanocomposites are presented regarding for different values of magnetic field intensity. Besides, other investigations are performed to show the impacts of other variants, such as slenderness ratio, boundary condition, distribution type and so on, on the critical stability limit of beams made from nanocomposites.

• Journal of Korean Vacuum Science & Technology
• /
• 제5권2호
• /
• pp.43-46
• /
• 2001

Fe-Au alloys are characterized by the complete solubility, and exhibit an fcc-bcc structural transformation at the Fe-rich side. The magneto-optical(equatorial Ken effect : EKE) and optical properties of Fe$\_$1-x/Aux (0 < x < 1) were investigated in the 0.5 - 5.0 eV energy range. The x-ray diffraction study shows the structural fcc-bcc transformation about 80 at. % of Fe. Noticeable changes in the optical properties caused by the fcc-bcc structural transformation was observed. The shape and intensity of the EKE spectra as well as the field dependence of the magneto-optical response were also significantly changed. It is thought that these changes are mainly comes from the induced magnetic moment in Au(and/or the emhanced magnetic moment of Fe). The nature of the prominent structure observed in the UV range of the magneto-optical Ken effect of Au/Fe multilayered films are disscussed in connection with the above results.

• Journal of the Optical Society of Korea
• /
• 제5권4호
• /
• pp.131-135
• /
• 2001

We report experiemtnal results demonstrating the electromagnetically induced transparency (EIT) in trapped Cs atoms. EIT occurs at the Λ-type configuration where the re0-pumping laser simultaneously plays a role as the coupling laser in the presence of a magneto-optical trapping and weak magnetic fields. Dependences of EIT signal on both the intensity and the detuning of the coupling laser were investigated. Linear absorption spectra for cold cesium atoms in the magneto-optical trap have been observed and shown the pronounced dispersion-like structure with sub-natural linewidth of 1 MHz due to the cooling laser.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.401-406
• /
• 2012

When viewed using a magnetic resonance imaging (MRI) system, invasive materials inside the human body, in many cases, severely distort the MR image of human tissues. The degree of the MR image distortion increases in proportion not only to the difference in the susceptibility between the invasive material and the human tissue, but also to the intensity of the magnetic field induced by the MRI system. In this study, by blending paramagnetic Ti particles with diamagnetic graphite, we synthesized $Ti_{100-x}C_x$ composites that can reduce the artifact in the MR image under the high-strength magnetic field. Of the developed composites, $Ti_{70}C_{30}$ showed the magnetic susceptibility of ${\chi}=67.6{\times}10^{-6}$, which corresponds to 30% of those of commercially available Ti alloys, the lowest reported in the literature. The level of the MR image distortion in the vicinity of the $Ti_{70}C_{30}$ composite insert was nearly negligible even under the high magnetic field of 4.7 T. In this paper, we reported on a methodology of designing new structural materials for bio-applications, their synthesis, experimental confirmation and measurement of MR images.

• Journal of Korean Neurosurgical Society
• /
• 제57권3호
• /
• pp.215-218
• /
• 2015

Occasionally, unexpected neurological deficits occur after lumbar spinal surgery. We report a case of monoparesis after lumbar decompressive surgery. A 63-year-old man, who had undergone decompression of L4-5 for spinal stenosis 4 days previously in the other hospital, visted the emergency department with progressive weakness in the left leg and hypoesthesia below sensory level T7 on the right side. He had been cured of lung cancer with chemotherapy and radiation therapy 10 years previously, but detailed information of radiotherapy was not available. Whole spine magnetic resonance (MR) imaging showed fatty marrow change from T1 to T8, most likely due to previous irradiation. The T2-weighted MR image showed a high-signal T4-5 spinal cord lesion surrounded by a low signal rim, and the T1-weighted MR image showed focal high signal intensity with focal enhancement. The radiological diagnosis was vascular disorders with suspicious bleeding. Surgical removal was refused by the patient. With rehabilitation, the patient could walk independently without assistance 2 months later. Considering radiation induced change at thoracic vertebrae, vascular disorders may be induced by irradiation. If the spinal cord was previously irradiated, radiation induced vascular disorders needs to be considered.

• 전기학회논문지P
• /
• 제55권3호
• /
• pp.141-145
• /
• 2006

The line current problem(2-dimensional space : point source) is not easy to analyze the magnetic field using the standard finite element method(FEM), such as overhead trolley line or transmission line. To supplement such a defect this paper is proposed the coupling scheme of analytical solution and FEM. In analysis of the magnetic field using the standard FEM. If the current region is a relatively small compared to the whole region. Therefore the current region must be finely divided using a large number of elements. And the large number of elements increase the number of unknown variables and the use of computer memories. In this paper, an analytical solution is suggested to supplement this weak points. When source is line current and the part of interest is far from line current, the analytical solution can be coupling with FEM at the boundary. Analytical solution can be described by the multiplication of two functions. One is power function of radius, the other is a trigonometric function of angle in the cylindrical coordinate system. There are integral constants of two types which can be established by fourier series expansion. Also fourier series is represented as the factor to apply the continuity of the magnetic vector potential and magnetic field intensity with tangential component at the boundary. To verify the proposed algorithm, we chose simplified model existing magnetic material in FE region. The results are compared with standard FE solution. And it is good agreed by increasing harmonic order.

• Journal of Magnetics
• /
• 제10권1호
• /
• pp.23-27
• /
• 2005

The crystallographic and magnetic properties of a series of substitutions in nickel ferrite where the Fe³⁺ is replaced with In³⁺ have been investigated using X-ray diffraction (XRD) and Mössbauer spectroscopy. Information on the exact crystalline structure, lattice parameters, bond lengths and bond angles were obtained by refining their XRD profiles by a Rietveld method. All the crystal structures were found to be cubic with the space group Fd/3m. The lattice constants increased with In³⁺ concentration. The expansion of the tetrahedron was outstanding, indicative of the tetrahedral (A) site preference of larger indium ion. The Mossbauer spectra showed two sets of sextuplet originating from ferric ions occupying the tetrahedral sites and the octahedral (B) sites under the Neel temperature T_N. Regardless of the composition x, the electric quadrupole splitting was zero within the experimental error. At x = 0.2, the magnetic hyperfine fields increased slightly, which meant that the nonmagnetic indium ions occupied preferentially the A-site. At the same time, the intensity of the B-site sub-spectra decreased markedly at the elevated temperature, indicating that the occupation of the A site by indium induced a considerable perturbation on the B site.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.891-899
• /
• 1996

A model for predicting the characteristics of elastic ferromagnetic materials having a moving gap was presented. Based on the model parameters concerning behavior of material, such as the instantaneous field intensity, attractive force between the poles, length of gap, and the induced current/ emf in the circuit can be determined from the numerical integrations of the governing equations derived. From the results of the model it is found that when dc emf is imposed on the circuit the current sharply rise and fall for very short duration then stabilize at extremely low level which depends mainly on elasticity, permeabilities and ratio of resistivity. Subsequently output emf is shown stabilized at constant value which depends on the previous parameters as well as the resistivity ratio of primary to secondary circuit after sufficient progress of time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.79-82
• /
• 2002

Induction heating is widely used in today's industry, in operations such as metal hardening, preheating for forging operations, melting or cooking. In this paper, it was presented the magneto-thermal analysis of an induction heating jar(IH-JAR) with the material value of the stainless and the aluminum for efficient design. The magnetic field intensity inside the axisymmetric shaped cooker was analyzed using three-dimensional axisymmetric finite element method(FEM) and the effectual heat source was obtained by ohmic losses from eddy currents induced in the jar. The heat was calculated using the heat source and heating equation. Also, it was represented the temperature characteristics of the IH-JAR according to time and relative permeability in stainless parts and in aluminum parts.