• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.259-262
• /
• 2003

Superconducting flux flow transistor(SFFT) is based on a control of the Abrikosov vortex flowing along a channel. The induced voltage by moving of the Abrikosov vortex in SFFT is greatly affected by the thickness and width, of channel. In order to fabricate a reproducibility channel in SFFT, we have researched the variation of the critical characteristics of YBCO thin films with the etching time using ICP(Inductively coupled plasma) system. It was certified that the velocity of vortex decreased with increasing the width of channel and was saturated faster in low bias from a simulation. An etching mechanism of YBCO thin films by ICP system was also certified by AFM(Atomic Force Microscope) and by measuring the critical current density with etching time. As measurement result, we could analyze that we should optimize the etching thickness of channel part to construct a flux flow transistor with desired characteristics.

• 한국자기학회지
• /
• 제26권4호
• /
• pp.133-136
• /
• 2016

본 연구에서는 현재 교량에 사용되고 있는 텐던의 인장력을 측정하기 위한 자기적 비파괴 검사 방법을 연구하였다. 최근 자기적 방법으로 사용되고 있는 초기투자율(${\mu}i$)과 증분투자율(${\mu}{\Delta}$) 측정 방법은 코일을 권선하여 텐던을 자화 시켜야 하고, 텐던의 자기소거상태에서 측정하여야 하는 어려움이 있다. 때문에 본 연구에서는 텐던이 7개의 strand로 꼬여 있는 것을 감안하여, Wiedemann effect를 활용한 방법을 연구하였다. 텐던에 직접 교류 전류를 인가한 후, 인장력을 변화시키면서 그에 따른 텐던의 자화 상태의 변화를 텐던에 부착된 탐지코일(Search Coil on Tendon; SCT)로부터 측정하고 분석하였다. 이를 위하여 본 연구에서는 텐던에 인장력을 2 GPa까지 인가할 수 있는 장치와 텐던에 직접 교류 전류를 인가하여 텐던을 자화시키기 위한 전류공급장치를 제작하였다. 비교실험을 위하여 두 제조회사에서 제작된 동일한 규격의 7-strands 텐던에 대한 인장력에 따른 자화 상태의 변화를 측정한 결과, 텐던에 인가하는 인장력에 따라 텐던에 부착된 탐지코일에서 유도되는 기전력의 변화가 비교적 선형적으로 감소함을 알 수 있었으며, 이는 A회사와 B회사의 텐던에서 모두 유사한 특성을 보여주었다. 따라서 탐지코일을 부착하여 제작한 텐던을 신설되는 교량에 적용한다면, Wiedemann 효과를 활용하여 교량의 안전 진단을 위한 자기적 비파괴 검사 방법으로 적용 가능할 것이라고 생각된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1320-1322
• /
• 1994

Photoisomerization characteristics of 4-octyl-4'-(5-carboxy-pentamethyleneoxy) azobenzene molecules (8A5H) were attained by measurement of absorbtion spectra. 8A5H in chroloform($6.0{\times}10^{-5}[M/l]$) shows trans to cis and cis to trans isomerization by irradiation of lights of 360[nm] and 450[nm] wavelength. From LB monolayer films of 8A5H, also the cis/trans photoisomerization was obtained and it has reversibility and memory characteristics. We are now trying to detect these properties of 8A5H electrically. On this paper, we investigated the structural changes of monolayer on the water surface by measuring the displacement current as a preliminary experiment. The measuring system was constructed at home-made Kuhn type LB(Langmuir-Blodgett) deposition apparatus. 8A5H solution was spreaded at the air-water interface and the currents induced by the dynamic behavior of molecules were measured when the molecules were pressed by barrier. The reversibility of displacement currents by compression and expansion was obtained from 8A5H molecules, which shows the compressed molecules have a tendency to disperse after the compression. From this experiment, we conclude that the behavior of molecules on water surface can be monitored electrically by using this current measuring method, and this method can also be applied to detect the photoisomerization of monolayers on water surface.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.201-208
• /
• 2023

The dependence of the electrical characteristics on the fast neutron fluence of an epitaxial 4H-SiC Schottky barrier diode (SBD) was investigated. The 30 MeV cyclotron was used for fast neutron irradiation. The neutron fluences evaluated through Monte Carlo simulation were in the 2.7 × 10¹¹ to 1.45 × 10¹³ neutrons/cm² range. Current-voltage and capacitance-voltage measurements were performed to characterize the samples by extracting the parameters of the irradiated SBDs. Neutron-induced defects in the epitaxial layer were identified and quantified using a deep-level transient spectroscopy measurement system developed at the Korea Atomic Energy Research Institute. As the neutron fluence increased from 2.7 × 10¹¹ to 1.45 × 10¹³ neutrons/cm², the concentration of the Z_1/2 defects increased by approximately 20 times. The maximum defect concentration was estimated as 1.5 × 10¹⁴ cm^-3 at a neutron fluence of 1.45 × 10¹³ neutrons/cm².

• 한국재난정보학회 논문집
• /
• 제11권1호
• /
• pp.89-96
• /
• 2015

선하역사 내부에 발생하는 소음을 저감하기 위해서는 진동의 감소가 필요하며, 보다 효과적인 진동 저감 대책 수립을 위해서는 궤도-접속교량-구조물의 상호작용 특성을 감안하여 열차 운행으로 발생하는 진동이 전달되는 경로 및 특성에 대한 명확한 이해가 필요하다. 이 논문에서는 국내 선하역사 현황을 구조적으로 분류하고 대표 선하역사에 대한 진동 측정을 통하여 역사에 발생하는 진동의 전달 특성을 분석하였다. 주파수응답을 통한 분석 결과 궤도의 진동이 역사로 전달되면서 고주파 성분이 큰 감소를 나타냈으며, 일부 역사에서 저주파 대역 내 증폭 구간이 발견되었다. 플로팅궤도가 적용되거나 TPS 구조의 역사는 궤도로부터 전달되는 진동이 비교적 큰 감소를 나타냈다.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.41-47
• /
• 2010

The effects of thermal treatment on CNTs, which were coated with a-$CN_x$ thin film, were investigated and related to variations of chemical bonding and morphologies of CNTs and also properties of field emission induced by thermal treatment. CNTs were directly grown on nano-sized conical-type tungsten tips via the inductively coupled plasma-chemical vapor deposition (ICP-CVD) system, and a-$CN_x$ films were coated on the CNTs using an RF magnetron sputtering system. Thermal treatment on a-$CN_x$ coated CNT-emitters was performed using a rapid thermal annealing (RTA) system by varying temperature ($300-700^{\circ}C$). Morphologies and microstructures of a-$CN_x$/CNTs hetero-structured emitters were analyzed by FESEM and HRTEM. Chemical composition and atomic bonding structures were analyzed by EDX, Raman spectroscopy, and XPS. The field emission properties of the a-$CN_x$/CNTs hetero-structured emitters were measured using a high vacuum (below $10^{-7}$ Torr) field-emission measurement system. For characterization of emission stability, the fluctuation and degradation of the emission current were monitored in terms of operation time. The results were compared with a-$CN_x$ coated CNT-emitters that were not thermally heated as well as with the conventional non-coated CNT-emitters.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1194-1205
• /
• 2005

The common-rail injection systems, as a new diesel injection system for passenger car, have more degrees of freedom in controlling both the injection timing and injection rate with the high pressure. In this study, a piezo-driven injector was applied to a high pressure common-rail type fuel injection system for the control capability of the high pressure injector's needle and firstly examined the piezo-electric characteristics of a piezo-driven injector. Also in order to analyze the effect of injector's needle response driven by different driving method on the injection, we investigated the diesel spray characteristics in a constant volume chamber pressurized by nitrogen gas for two injectors, a solenoid-driven injector and a piezo-driven injector, both equipped with the same injection nozzle with sac type and 5-injection hole. The experimental method for spray visualization was based on back-light photography technique by utilizing a high speed framing camera. The macroscopic spray propagation was geometrically measured and characterized in term of the spray tip penetration, spray cone angle and spray tip speed. For the evaluation of the needle response of the above two injectors, we indirectly estimated the needle's behavior with an accelerometer and injection rate measurement employing Bosch's method was conducted. The experimental results show that the spray tip penetrations of piezo­driven injector were longer, on the whole, than that of the solenoid-driven injector. Besides we found that the piezo-driven injector have a higher injection flow rate by a fast needle response and it was possible to control the injection rate slope in piezo-driven injector by altering the induced current.

• 대한한방내과학회지
• /
• 제31권4호
• /
• pp.763-774
• /
• 2010

Objectives : In condition of brain infarction, irreversible axon damage occurs in central nerve system(CNS), because gliosis becomes physical and mechanical barrier to axonal regeneration. Reactive gliosis induced by ischemic injury such as middle cerebral artery occlusion is involved with up-regulation of GFAP and CD81. The current study is to examine the effect of the Uncariae Ramulus et Uncus on CD81 and GFAP expression in the rat brain following middle cerebral artery occlusion. Methods : In order to study ischemic injuries on brain, infarction was induced by middle cerebral artery occlusion(MCAO) using insertion of a single nylon thread, through the internal carotid artery, into a middle cerebral artery. Cresyl violet staining, cerebral infarction size measurement, immunohistochemistry and microscopic examination were used to detect the expression of CD81 and GFAP and the effect on the infarct size and pyramidal cell death in the brain of the rat with cerebral infarction induced by MCAO. Results : The following results were obtained 1. Measuring the size of cerebral infartion induced by MCAO in the rat after injection of Uncariae Ramulus et Uncus showed the size was decreased. 2. Intravenous injection of Uncariae Ramulus et Uncus showed pyramidal cell death protection in the hippocampus in the MCAO rat. 3. Water extract injection of Uncariae Ramulus et Uncus decreased GFAP expression significantly in the MCAO rat. 4. Uncariae Ramulus et Uncus water extract decreased CD81 expression in the MCAO rat. 5. The administration of water extract of Uncariae Ramulus et Uncus induced up-regulation of c-Fos expression significantly compared with MCAO. 6. The admistration of water extract of Uncariae Ramulus et Uncus increased ERK expression significantly compared with MCAO. Conclusion : We observed that Uncariae Ramulus et Uncus could suppress the reactive gliosis, which disturbs the axonal regeneration in the brain of the rat with cerebral infaction after MCAO by controlling the expression of CD81 and GFAP. The effect may be modulated by the up-regulation of c-Fos and ERK. These results suggest that Uncariae Ramulus et Uncus can be a candidate to regenerate CNS injury.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.86-95
• /
• 2006

Brillouin backscatter is a type of reflection that occurs when light is shone into an optical fibre. Brillouin reflections are very sensitive to changes in the fibre arising from external effects, such as temperature, strain and pressure. We report here several case studies on the measurement of strain using Brillouin reflections. A mechanical bending test of an I beam, deployed with both fiber optic sensors and conventional strain gauge rosettes, was performed with the aim of evaluating: (1) the capability and technical limit of the DTSS technology for strain profile sensing; (2) the reliability of strain measurement using fiber optic sensor. The average values of strains obtained from both DTSS and strain gauges (corresponding to the deflection of I beam) showed a linear relationship and an excellent one-to-one match. A practical application of DTSS technology as an early warning system for land sliding or subsidence was examined through a field test at a hillside. Extremely strong, lightweight, rugged, survivable tight-buffered cables, designed for optimal strain transfer to the fibre, were used and clamped on the subsurface at a depth of about 50cm. It was proved that DTSS measurements could detect the exact position and the progress of strain changes induced by land sliding and subsidence. We also carried out the first ever distributed dynamic strain measurement (10Hz) on the Korean Train eXpress(KTX) railway track in Daejeon, Korea. The aim was to analyse the integrity of a section of track that had recently been repaired. The Sensornet DTSS was used to monitor this 85m section of track while a KTX train passed over. In the repaired section the strain increases to levels of 90 microstrain, whereas in the section of regular track the strain is in the region of 30-50 microstrain. The results were excellent since they demonstrate that the DTSS is able to measure small, dynamic changes in strain in rails during normal operating conditions. The current 10km range of the DTSS creates a potential to monitor the integrity of large lengths of track, and especially higher risk sections such as bridges, repaired track and areas at risk of subsidence.