• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.246-253
• /
• 2010

In this paper, a method of removing the space skew and cross-talk cancellation is proposed where the self-generated signals from the subject are used to obtain the subject's location. In the proposed method, the good spatial sound image is maintained even when the listener moves from the sweet spot. Two major parts of the proposed method are as follows: listener position tracking using the stimuli from the subject and removal of the space skew and cross-talk signals. Listener position tracking is achieved by estimation of the time difference of arrival (TDoA). The position of the listener is then computed using the Talyer-series estimation method. The head-related transfer functions (HRTF) are used to remove the space skew and cross-talk signals, where the direction of the HRTF is given by the one estimated from the listener position tracking. The performance evaluation is carried out on the signals from the 100 subjects that are composed of the 50 female and 50 male subjects. The positioning accuracy is achieved by 70%~90%, under the condition that the mean squared positioning error is less than $0.07m^2$. The subjective listening test is also conducted where the 27 out of the 30 subjects are participated. According to the results, 70% of the subjects indicates that the overall quality of the reproduced sound from the proposed method are improved, regardless of the subject's position.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.246-252
• /
• 2020

Safety accidents have been reported due to falling accumulated snow from cables of cable-supported bridges. In addition to the direct damage caused by falling snow, secondary damage, such as traffic accidents, can occur. Various methods have been proposed to prevent these accidents, but there are still problems in safety and practicality. In this study, a cable robot type was selected as one of the active methods for removing accumulated snow on cables. An attempt was made to increase the climbing ability of the robot to improve the efficiency of snow removal. In addition, the available range of cable diameter for the robot can be adjusted flexibly to be applied to cables used in the field. A high-resolution camera was also installed to check the surface condition of the cable in real time to increase the utility, and be used as a cable inspection robot. A three-axis accelerometer and a tension conversion algorithm were added to measure the tension force of cables. To verify the performance, indoor and field experiments were conducted, and future improvements for the inspection robot were proposed.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.35-44
• /
• 2014

The purpose of this paper is to investigate the readability of Nearly White background color in display environment. To perform the experiment, warmup experiment was carried out to for cognitive of whiteness using a Tablet PC. The experiment environment was by a indoor window seat under a mixture of fluorescent light and sunlight. The result of previous test was that the most whiteness perception was a color white a medium wavelength and followed by the short wavelength. The main experiment was to find readability, color combination and visual strains using 4 nearly whites background colors (Reddish, Greenish, Blueish, Yellowish) and one white background color, also text color is limited on black. As a result, readability and color combination had the highest score against a Greenish white background. Visual strain is also the lowest against a Greenish background. On the contrary, readability and color combination preference has the lowest score against the Reddish background. Visual strain is also the highest against a Reddish background. We propose the background color, which improves readability and reduces visual strain in visual display terminals environment through the research results.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.478-485
• /
• 2015

The aim of this study is to analyze the combustion and thermal properties in order to establish baseline data for the fire safety evaluation of domestic timbers. The combustion properties such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter test and thermogravimetry (TGA). Thermal decomposition temperatures of the specimens by TGA were recorded as $359.83^{\circ}C$ for White pine, $359.80^{\circ}C$ for Red-Leaved Hornbeam, $363.14^{\circ}C$ for Carolina poplar, $358.59^{\circ}C$ for Konara oak, and $362.11^{\circ}C$ Sargent cherry. Red-Leaved Hornbeam showed the highest value of heat release rate, but, Carolina poplar wood showed the lowest value. In case of the total heat release, Red-Leaved Hornbeam wood showed the highest value and Carolina poplar wood showed the lowest one. The gas analysis results showed that Sargent cherry wood had the lowest value of 0.021, and Konara oak had the highest at 0.031 in the $CO/CO_2$. The minimum value of mass reduction was recorded as 87.57% for Sargent cherry, but, on the other hand, it was 95.03% for Konara oak. There was a correlation between the gas generation of CO and $CO_2$, and combustion behavior of woods. These results are expected to be usful for providing a fundamental guideline with the fire safety of wood use in interior applications.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.471-477
• /
• 2002

Recently, lip-reading has been studied actively as an auxiliary method of automatic speech recognition(ASR) in noisy environments. However, almost of research results were obtained based on the database constructed in indoor condition. So, we dont know how developed lip-reading algorithms are robust to dynamic variation of image. Currently we have developed a lip-reading system based on image-transform based algorithm. This system recognize 22 words and this word recognizer achieves word recognition of up to 53.54%. In this paper we present how stable the lip-reading system is in environmental variance and what the main variant factors are about dropping off in word-recognition performance. For studying lip-reading robustness we consider spatial valiance (translation, rotation, scaling) and illumination variance. Two kinds of test data are used. One Is the simulated lip image database and the other is real dynamic database captured in car environment. As a result of our experiment, we show that the spatial variance is one of degradations factors of lip reading performance. But the most important factor of degradation is not the spatial variance. The illumination variances make severe reduction of recognition rates as much as 70%. In conclusion, robust lip reading algorithms against illumination variances should be developed for using lip reading as a complementary method of ASR.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.112-121
• /
• 2015

In this study, Copper Azole (CuAz), a domestically available wood preservative for pressure treatment, was employed to perform an experimental research on its infiltration and decay properties in Japanese Red Pine. Test specimens were pressure-injected with CuAz-2 preservative to measure its preservative effectiveness, and then its impact on weight and mass losses. Furthermore, wood specimens were treated with CuAz-2 preservatives of various concentration levels before they were decayed with brown-rot-fungi in order to observe decay properties on light microscope (LM) and field emission scanning electron microscope (FE-SEM). As a result, untreated specimen by Fomitopsis palustris showed the mass loss of more than 40%, and the value of preservative effectiveness of CuAz-2 by indoor decay was $1,73-3.32kg/m^3$. The concentration levels of CuAz-2 preservative were shown to cause significant variations in terms of decay progresses in the cross section, radial section, and tangential section. By contrast, untreated specimens had underwent serious decays in early wood, late wood, longitudinal resin canals, and ray, which led to vertical destruction of wood texture. As for the radial section, ray tracheid, ray parenchyma cell, and window like pits were decayed and destroyed. In the case of tangential section, uniseriate rays and vertical resin canals were seriously decayed. In conclusion, this study indicates that the adequacy of the current CuAz injection amount should be reviewed in the domestic environment because there are significantly different decays at different decay conditions.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.148-155
• /
• 2014

The transfer pattern of chlorpyrifos present in soil to cucumber plants were assessed and reported with plant growth, concentration dependency, and duration. Cucumber seedlings cultivated in a growth chamber for 30 days and a greenhouse for 120 days. Weight and length of cucumbers cultivated in the chamber increased with the increasing time, while the uptake of chlorpyrifos by cucumber increased a period from 0 to 15 days and decreased after 15 days. Uptake rates of chlorpyrifos into a cucumber plant were 1.0~1.3% to initial amounts treated with 20 and 40 mg/kg to soil. Most chlorpyrifos residues were detected in root, followed by stem and leaf. Results of the greenhouse test showed that chlorpyrifos amounts in cucumber fruits were present less than LOQ (0.02 mg/kg), and chlorpyrifos was mainly found in the root of the cucumber plant. Chlorpyrifos absorbed in a cucumber under greenhouse condition was smaller than that in chamber condition as 0.03~0.04%. Degradation patterns of chlorpyrifos in soils were similar during indoor and outdoor tests with half-lives of 25.8~73.0 days. These results may be useful for establishing the management strategy of residual pesticides in soil environment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.48-54
• /
• 2020

Cracks in reinforced concrete structures are the most common type of damage and are used as important analytical data to understand the fracture behavior characteristics of structures. Currently, there is a problem that most of the crack investigation relies on visual inspection, therefore many researchers have proposed image analysis techniques to improve the problem. In this study, we proposed a crack evaluation method to be applied at an indoor experimental level using image analysis method. The image analysis technique using color is for distinguishing a boundary surface between objects existing in an image, and is a method for separating similar colors into one region based on a predefined color. In this study, to improve the accuracy of image analysis, blue paint was applied to the concrete surface and bending experiments were performed. The image analysis method was able to measure the crack width with superior accuracy compared to the crack diameter, and at the same time, it was also possible to analyze the deflection of the beam. Both the crack and deformation were able to confirm the accuracy similar to the existing measurement method, and it was found that the image analysis method was very excellent in terms of applicability.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.309-315
• /
• 1996

Selective breeding and hybridization were attempted to improve shiitake(Lentinus edodes) strains for bed-log cultivation, and the results obtained are as follows. 1. Thirty five strains collected in Korea and abroad were cultivated for one generation(five years) and fruit body yields were estimated by the amounts produced from $1m^3$ of oak tree(Quercus mongolica) logs. Thus, three high-temperature type strains including FRI 177 showing productivity of $139kg/m^3log$, two mid-temperature type strains including FRI 188 of $120kg/m^3log$, and seven low-temperature type strains including FRI 187 of $96kg/m^3log$ were selected as superior strains. 2. Twelve hybrid strains confirmed as independent strains through indoor-test with hybrid strains made by Di-mon mating method were cultivated for five years(one generation). Among them, FRI 182 and FRI 184 were turned out to be superior strains. FRI 182 of high-temperature type showed the yield of 108kg per $1m^3logs$ and FRI 184 of low-temperature type produced $103kg/m^3log$. 3. There were no significant differences in productivity among high-, mid- and low-temperature types, but some differences appeared among strain groups. The correlation was not shown in productivities between bed-log and sawdust cultivations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.97-107
• /
• 2009

In image-based gait recognition systems, physical factors, such as the camera angle and the lens distortion, and environmental factors such as illumination determines the performance of recognition. In this paper we present a robust gait recognition method by compensating various types of image distortions. The proposed method is compared with existing gait recognition algorithm with consideration of both physical and environmental distortion factors in the input image. More specifically, we first present an efficient compensation algorithm of image distortion by using the projective transform, and test the feasibility of the proposed algorithm by comparing the recognition performances with and without the compensation process. Proposed method gives universal gait data which is invariant to both distance and environment. Gained data improved gait recognition rate about 41.5% in indoor image and about 55.5% in outdoor image. Proposed method can be used effectively in database(DB) construction, searching and tracking of specific objects.