• 제목/요약/키워드: indoor and outdoor

검색결과 1,342건 처리시간 0.031초

BIM을 이용한 전통 한옥의 공간구문 분석을 위한 공간분할기법 개발 (Development of a Spatial Subdivision Technique using BIM for Space Syntax Analysis of a Korean Traditional House)

  • 정상규
    • KIEAE Journal
    • /
    • 제10권3호
    • /
    • pp.57-62
    • /
    • 2010
  • To effectively use Building Information Modelling (BIM) dealing with semantic information including the entities of building components, the information about building components should be standardized. Like standardized modern buildings. in the past, Korean traditional houses were built according to strict procedures and formats. Therefore, if the Korean traditional house are modelled by using BIM,. not only the Korean traditional house of good quality will be built quickly and cheaply, but also spaces in the existing Korean traditional house will be easily analyzed. However, when analyzing spaces of the Korean traditional house using Space Syntax, some problems are caused in dividing outdoor space such as yard with unclear boundaries, unlike indoor space with clear boundaries surrounded by walls. These comes from the fact that researchers have subjectively divided a space in the house into convex spaces as units for Space Syntax analysis. Therefore, this study aims to develop an objective and rational spatial subdivision technique for Space Syntax analysis of a Korean traditional house modelled by using BIM. We could objectively and reasonably divide a Korean traditional house space into convex spaces by recognizing the building components in the house modelled in the form of Industry Foundation Classes(IFC). Depending on the connection of convex spaces allocated in the spatial subdivision technique, j-graph in Space Syntax could be drawn and the measurements of spatial configurations could be determinded. Through the developed technique, the social properties including the cultural and philosophical aspects of Korean people was identified by measuring the spatial configurations of Korean traditional house. The developed technique will serve as useful means to help architects to find an appropriate purpose of each space for sustainable architecture on the basis of the spatial and social relationships in buildings or urban systems.

멀티센서 기반 차량 위치인식 시스템의 설계 및 구현 (Design and Implementation of Multi-Sensor-based Vehicle Localization and Tracking System)

  • 장윤호;남상균;배상준;성태경;곽경섭
    • 한국ITS학회 논문지
    • /
    • 제8권6호
    • /
    • pp.121-130
    • /
    • 2009
  • 본 논문에서는 가우시안 정규분포 모델 기반의 멀티센서 데이터 퓨전 알고리즘을 이용한 차량 위치인식 시스템을 제안한다. 기존의 차량 위치인식 시스템은 GPS를 중심으로 제공되어 왔으나 위성 신호 수신이 어려운 실내나 빌딩이 빽빽하게 들어선 도심에서는 제대로 작동하지 않는 문제가 있었다. 이를 해결하기 위해 GPS와 UWB를 결합하는 방법이 연구되었으나 위치변화에 따라 각 측위매체를 이산적으로 전환하여 차량과 같은 이동이 잦은 대상에게 끊임없이 유연한 위치 정보를 제공하지 못하는 단점이 있다. 따라서 본 논문에서는 가우시안 정규분포 모델을 바탕으로 GPS 위치 데이터와 UWB 센서 데이터를 유기적으로 결합하는 Hybrid UWB/GPS 측위시스템을 구성하여 측위시스템의 적용범위에 민감하지 않고 유연한 위치정보를 제공하도록 한다. 제안된 시스템을 Ubisense와 Asen GPS를 이용하여 $12m\;{\times}\;8m$ 크기의 실외 환경에서 실험하였으며, 구현된 시스템을 통해 기존 UWB 및 GPS 시스템에 비해 정밀도 및 연동성이 향상되었음을 확인하였다. 이를 통해 차량에서 주차 관리 및 차량추적 관리 등 다양한 CNS를 지원할 수 있다.

  • PDF

터널 환경에서의 전파전파 특성 모델링 연구 (Study on Wave Propagation Characteristics Modeling in Tunnel)

  • 정원정;김태홍;한일탁;최문영;류준규;이호진;백정기
    • 한국전자파학회논문지
    • /
    • 제20권9호
    • /
    • pp.1003-1013
    • /
    • 2009
  • 국내 환경의 경우, 산악 지형이 많은 지형적 특성상 수많은 터널이 존재한다. 터널은 무선 채널 환경 중 대표적인 음영지역으로서 실외 및 실내 환경의 무선 채널과는 다른 특성을 갖기 때문에 터널 환경에서의 안정된 서비스 품질을 확보하기 위해서는 전파 채널의 특성 연구가 필요하다. 특히 위성을 이용한 이동 서비스를 위해서는 터널에 의한 음영지역에서의 정상적인 위성 신호 수신이 필요하며, 이를 위해 Gap-Filler라고 하는 지상 중계기를 운영하게 되는데 이를 이용하기 위해서는 터널 환경에서의 전파전파 특성 분석을 바탕으로 한 Gap Filling 방법 연구가 필수적이다. 따라서 본 논문에서는 음영 지역에서의 정상적인 위성 신호 수신을 위하여 터널 환경에서의 ISM 대역의 전파전파 특성을 분석하고, 이를 바탕으로 효율적인 Gap Filling 방법에 대한 연구를 수행하였다.

실내/외 스모그 챔버에서의 방향족계 탄화수소의 광화학 반응 비교 연구 (Comparative Study on Photochemical Reactions of Aromatic Hydrocarbons in Indoor and Outdoor Smog Chambers)

  • 동종인;안흥순
    • 한국환경과학회지
    • /
    • 제14권2호
    • /
    • pp.231-240
    • /
    • 2005
  • The number of cases exceeding environmental standards of atmospheric ozone in the major cities in Korea has steadily increased during the past decades. In order to understand and analyze the atmospheric reactions in the atmosphere, especially the secondary photochemical reactions, smog chambers studies have been performed very actively by many research groups worldwide. However, these studies have focused on the mechanism of photochemical reactions in high concentration conditions, not at the ambient levels. Therefore, in-depth studies in these conditions are essentially needed to realize exact mechanism in the atmosphere near the earth surface, especially at Korean atmospheric conditions. In this experiment, the mechanism of photochemical smog was examined through a comparative experiment of smog chambers under sun light and black light conditions. The results of our study indicated that concentrations of ozone, aldehyde, and PAN increased as the radiation of light source increases. Photochemical reaction patterns can be considered quite similar for both black light and sun light experiments. Based on our experiments using toluene as a reactant which is present at significant high levels in ambient air relative to other VOCs, it was found that toluene could contribute notably to oxidize NO to $NO_2$, this reaction can eventually generate some other photochemical oxidants such as ozone, aldehyde, and PAN. The results of simulation and experiments generally showed a good agreement quite well except for the case of $O_3$. The restriction of oxidization of NO to $NO_2$ seems to cause this difference, which is mainly from the reaction of peroxy radical itself and other reactants in the real gas.

압전 후막의 전단 변형을 이용한 나선형 MEMS 발전기 (A Novel Spiral Type MEMS Power Generator with Shear Mode Piezoelectric Thick Film)

  • 송현철;김상종;문희규;강종윤;윤석진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.219-219
    • /
    • 2008
  • Energy harvesting from the environment has been of great interest as a standalone power source of wireless sensor nodes for ubiquitous sensor networks (USN). There are several power generating methods such as thermal gradients, solar cell, energy produced by human action, mechanical vibration energy, and so on. Most of all, mechanical vibration is easily accessible and has no limitation of weather and environment of outdoor or indoor. In particular, the piezoelectric energy harvesting from ambient vibration sources has attracted attention because it has a relative high power density comparing with other energy scavenging methods. Through recent advances in low power consumption RF transmitters and sensors, it is possible to adopt a micro-power energy harvesting system realized by MEMS technology for the system-on-chip. However, the MEMS energy harvesting system hassome drawbacks such as a high natural frequency over 300 Hz and a small power generation due to a small dimension. To overcome these limitations, we devised a novel power generator with a spiral spring structure. In this case, the energy harvester has a lower natural frequency under 200 Hz than a normal cantilever structure. Moreover, it has higher an energy conversion efficient because shear mode ($d_{15}$) is much larger than 33 mode ($d_{33}$) and the energy conversion efficiency is proportional to the piezoelectric constant (d). We expect the spiral type MEMS power generator would be a good candidate as a standalone power generator for USN.

  • PDF

독거노인의 생활활동능력과, 신체통증과 정서상태에 관한 비교연구 (The comparative study of activity ability of daily livings, body pain and emotional states between elders living alone and those living with others)

  • 신영석;김우섭;신이수;최다경;채선아;정덕영;김규호
    • 재활복지공학회논문지
    • /
    • 제12권1호
    • /
    • pp.29-37
    • /
    • 2018
  • 본 연구에서는 독거노인과 비독거노인의 건강상태에 관하여 생활활동능력, 신체통증 그리고 정서상태의 3가지 요소로 나누어 그룹간에 차이를 비교하고 고령자의 건강상태에 관여하는 요인에 대한 관련성을 확인해 보았다. 연구에는 총 88명의 고령자를 대상으로 조사를 실시하여 분석에 사용하였다. 비독거노인에 비해, 독거노인의 경우 생활활동능력이 낮고, 신체적통증이 높으며, 정서상태가 부정적인 것으로 나타났다. 그리고 3요소간 유의미한 상관관계가 있었는데, 세부 분석 결과 이는 거주형태(독거/비독거)이외에도 생활활동패턴(실내/실외 활동)이 동시에 관여하고 있음을 확인하였다. 본 연구결과는 독거노인 돌봄서비스와 고령자의 건강상태를 객관적으로 측정하기 위한 생리학적 지표개발에 기초자료로 활용되어 질 수 있을 것으로 예상한다.

한옥 설계의 최근 경향 연구 - 최근 10년간 건축전문 잡지에 게재된 신축 한옥을 대상으로 - (The Recent Trends of Hanok Design - Based on the Analysis of the Hanoks Appeared in Architecture Magazines in the Last 10 Years -)

  • 이주옥;한필원
    • 건축역사연구
    • /
    • 제21권1호
    • /
    • pp.171-186
    • /
    • 2012
  • The objective of this study is to find out the recent trends of hanok design based on 58 hanoks appeared in architecture magazines in the last 10 years. The cases are analyzed in terms of location, size, building form, spatial organization, material, roof form, and the ceiling form of living room. The consequences of this study is as follows; Most of the recent hanoks are built in rural area (91.4%), which shows the hanok is not accepted as an urban house type. Hanoks tend to be built in 2 stories whose 2nd floor is smaller than the 1st floor. (34.5%) The preferred size is total floor area of $99.2{\sim}165.2m^2$ (62.0%), 3 rooms (46.6%) with a traditional ondol room (60.3%). The buildings with ㄱ-shape (43.1%) and linear-shape (27.6%) are preferred, and the compact plan type similar with apartment house appears (13.8%). In the roof design that greatly influences the appearance of building, the traditional design factors such as half-hipped roof (55.2%), double eaves (27.6%), and eaves curve tend to be sustained. In terms of spatial organization, most of recent hanoks have double-layed plan (74.2%). The living room mostly has separately defined space. (82.8%) The indoor and outdoor tend to be connected by a narrow wooden veranda (39.7%), while some cases don't have any wooden floor space (48.3%). The entrance is adopted as an important spatial element in front part of building (75.9%), and it influences the appearance of building. The living room, the counterpart of the wooden floor hall in traditional hanok, and kitchen tend to be interiorized. In terms of material, the cement roof tile and red clay brick are preferred. Consequently, the walls of recent hanoks have the image of brick structure rather than the wooden frame structure of traditonal hanok.

USN 기반의 무선 멀티 커뮤니케이션 회로 설계 및 구현 (Design and Implementation of Wireless Multicommunication Circuit Based On USN)

  • 심갑식;장재혁
    • 한국콘텐츠학회논문지
    • /
    • 제11권8호
    • /
    • pp.33-42
    • /
    • 2011
  • 본 논문에서는 RFID와 무선 통신 기술인 ZigBee를 통합하여 원격지 디바이스들을 원격 제어 가능한 무선 통신 회로를 설계하고 구현하였다. 본 시스템은 송신부와 수신부가 통합되었으며, RFID 태그의 데이터를 인식한 후, 인식된 데이터는 MCU에 의해 제어되며 ZigBee를 통해 원격지 디바이스에 전송되어 TinyOS 상에서 작동한다. 만약 이 시스템을 건물 출입 보안 시스템에 적용하면 출입 허가 여부뿐만 아니라 개인용 컴퓨터나 기타 전자 장치들을 제어할 수 있다. 실험 결과, 개방된 운동장과 한정된 공간과는 인식 데이터 전송이 확연히 다름을 알 수 있다. 데이터 전송 시간은 건물 내부에서 더 안정적이고 데이터 전송 거리에서는 외부에서 더 멀었다. 구현된 시스템은 Wired LAN이나 IEEE 802.11x 계열의 WLAN과 결합하여 사무실 중심의 각종 영역에 활용될 수 있을 것으로 기대된다.

5.8GHz 대역에서의 중장거리 영상 전송 무선 방식 (Medium to Long Range Wireless Video Transmission Scheme in 5.8GHz Band)

  • 백정훈;김남호;지민기
    • 방송공학회논문지
    • /
    • 제21권5호
    • /
    • pp.662-671
    • /
    • 2016
  • 본 논문에서는 5.8GHz 대역에서 중장거리 통신거리를 제공하면서 영상 데이터의 손실률을 저하시키는 무선 영상전송 방식을 제안한다. 무선 환경에서 수 십 km 이상의 중장거리 통신이 가능하도록 다중 안테나를 통한 빔형성(Beam Forming) 방식을 적용하고 신뢰성 높은 영상데이터 전송을 위하여 MCS(Modulation and Coding Scheme)와 재전송을 결합한 영상전송 방식을 제안한다. 제안한 방식을 적용하여 80dB 감쇄의 실내 환경에서 1,000바이트의 페이로드 길이를 사용하고 10ms의 타임아웃 시간을 적용한 FPING을 통해 최소 0.92%의 손실률이 달성되고, 옥외환경에서 최대 전송속도 13Mbps에서 무선통신거리가 21.2Km인 무선전송이 달성됨을 확인한다.

조명변화와 곁침에 강건한 적응적 모델 기반 다중객체 추적 (Adaptive Model-based Multi-object Tracking Robust to Illumination Changes and Overlapping)

  • 이경미;이윤미
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제32권5호
    • /
    • pp.449-460
    • /
    • 2005
  • 본 논문에서는 고정된 카메라로부터 획득된 색상 비디오 프레임에서 조명변화와 겹침으로 인한 왜곡에 강건하게 다수의 사람을 추적하는 방법을 제안한다. 조명변화에 따른 외형변화의 문제점을 해결하기 위하여 시간 비종속적인 본래(intrinsic) 영상을 이용하여 프레임에 존재하는 조명을 제거하며, 매 프레임마다 조명 영상을 적응적으로 갱신한다. 카메라 내에서 사람을 추적하기 위해 색상정보를 포함하는 계충적 사람모델을 사용함으로써 겹침의 문제를 해결한다. 추적된 사람모델은 사람모델 리스트에 저장되어 해당되는 사람이 카메라에서 사라진 후에도 일정 기간 보존됨으로써, 재등장한 사람의 정보를 복원할 수 있다. 본 논문에서 제안하는 적응적 모델기반 방법은 실내${\cdot}$외 영상을 대상으로 여러 시나리오로 실험되어, 조명변화로 왜곡된 사람의 색상정보를 옳게 보정하였을 뿐만 아니라 사람들이 겹치거나 헤어진 후에도 성공적으로 추적하였음을 확인하였다.