• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.538-545
• /
• 2020

The outdoor coal storage sheds of thermal power plants are being converted to indoor coal storage sheds worldwide because of the environmental pollution problems in the surrounding areas. On the other hand, indoor coal storage sheds are causing problems, such as indoor coal scattering and harmful gas generation. In this study, the ventilation method of indoor coal storage sheds was analyzed in terms of the internal flow characteristics and ventilation according to the outside wind velocity and direction. CFD analysis was performed based on the actual flow measurement information inside the indoor coal storage sheds. A comparison of the wind speed of 6 m/s and 2 m/s when the outside wind direction was easterly showed that the stream velocity to the monitor louver was faster and the recirculation area was clearer at 6 m/s than at 2 m/s. In addition, the trend of a westerly wind was similar to that of the easterly wind. The ventilation rate according to the wind speed was 13.1 times and 4.4 times for a wind speed of 6 m/s and 2 m/s, respectively. If the wind speed is 2 m/s, the situation does not meet the required number of ventilations per hour in a general plant, and needs to be improved.

• Journal of the Korean Society of Floral Art and Design
• /
• no.44
• /
• pp.3-31
• /
• 2021

To verify the types of effects that plants have in our general living conditions, I examined an air quality in living rooms of the three, 129.78m² size, apartments that were with and without plants. and the findings of the study were as addressed below. 1) Experiments showed no statistically significant differences in Case A. However, in Case B and Case C, the standard deviation of PM10, PM2.5 and PM 1.0 verified that each had statistically significant (p<.01) differences. 2) It is believed that the effect of reducing particle matters due to the installation of plants in the indoor space is to vary significantly depending on the indoor environmental conditions, the cleanliness of the room, and the amount of furniture and may also differ depending on the daily dietary cooking method. In addition, it is believed that the planterior will not only reduce indoor fine dust, but also reduce the psychological comfort and eye fatigue of the residents. Nevertheless, supplementary research is needed. 3) In the planterior design for reducing indoor particle matters, various measures were examined. Among them, the vertical wall design method was tested and suggested through empirical experiments. In addition, maintenance methods were proposed depending on the type of indoor plant.

• Journal of Environmental Impact Assessment
• /
• v.31 no.5
• /
• pp.334-342
• /
• 2022

The stringent air environment conservation act forced to build an indoor dome for coal storage. However, it causes some problems due to accumulation of fly ash and harmful substances inside. To solve this problem, this study analyzed the pattern of internal airflow and the amount of ventilation for an indoor coal yard. Overall, the airflow inside the indoor coal yard tended to move to the southwest facing the mountain. In addition, sea-breeze was blowing from the northern louver window facing the sea, where airflow was flowing in. The total flow rate flowing into the indoor coal yard was 918,691 m³/h, and the number of natural ventilation per hour was 0.6 times. Therefore, it is proposed to install a forced ventilation device at the location where internal air flow is concentrated.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.133-139
• /
• 2012

The Aims of this study are to investigate ecological environments and indoor-rearing conditions of Eurema hecabe for artificial rearing. Two different nesting site, a open area nearby small river(A area; Daejin-ri, Gonyang-myeon, Sachun-si, Gyoungsangnam-do) and a foot of a hill area(B area; Noryang-ri, Seolcheon-myeon, Namhae-gun, Kyoungsangnam-do), selected for investigation of ecological habitat environment, and investigated two times per month, during six month, from June to November in 2010. In result, the number of butterflies, Eurema hecabe, at the hill area(B area) was 6 times more than the open area(A area). We observed the number of eggs, larvae and puapae in the B area more times compared to those in the A area. In the B area, Lespedeza cuneata was higher preference than the other host plant, Lespedeza pilosa and Albizia julibrissin. For development of indoor-rearing conditions, common grass yellow butterfly, Eurema hecabe, was reared in a room condition. As a result of oviposition preference experiment, 100-mated-female laid significantly higher number of eggs $104.9{\pm}19.6$ on Lespedeza cuneata plant, whereas the number of eggs was $12.7{\pm}4.5$ on Cassia obtusifolia plant. Moreover, the eggs hatched within $5.1{\pm}0.9$ days from the day of oviposition and procent of egg hatchability was 53.7% on host plant. The headwidth of each developmental larval stage were $0.36{\pm}0.02$(1st), $0.61{\pm}0.02$(2nd), $0.93{\pm}0.05$(3rd), $1.46{\pm}0.08$(4th), $2.25{\pm}0.11$(5th). The larval period was $12.1{\pm}0.9$ days under high temperature, long day condition($25^{\circ}C$, 16L : 8D), showing 81.0% pupal ratio. The pupal period was $6.9{\pm}0.7$ days, and the emergence rate was 79.6%. Based on above experiment, artificial rearing system of common grass yellow butterfly, Eurema hecabe was completed in indoor condition.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.546-555
• /
• 2014

The final aim of this study is to develop a biofiltration system integrated with plant vegetation for improving indoor air quality effectively depending on indoor space and characteristics. However, to approach this final goal, several requirements such as constant pressure drops (PDs) and soil moisture contents (SMCs), which influence the capacity design for a proper ventilation rate of biofiltration system, should be satisfied. Thus, this fundamental experiment was carried out to adjust a proper wind speed and to ensure a stabilization of initial SMCs within biofilter for uniform distribution of SMCs and PDs, and for normal plant growth, especially avoiding root stress by wind. Therefore, we designed horizontal biofliter models and manufactured them, and then calculated the ventilation rate, air residence time, and air-liquid ration based on the biofilter depending on three levels of wind speed (1, 2, and $3cm{\cdot}s^{-1}$). The relative humidity (RH) and PD of the humidified air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of lettuce and duffy fern grown within biofilter were measured depending on the three levels of wind speed. As a result of wind speed test, $3{\cdot}sec^{-1}$ was suitable to keep up a proper RH, SMC, and plant growth. Thus, the next experiment was set up to be two levels of initial SMCs (low and high initial SMC, 18.5 and 28.7%) within each biofilter operated and a non-biofiltered control (initial SMC, 29.7%) on the same wind speed ($3cm{\cdot}sec^{-1}$), and measured on the RH and PD of the air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of Humata tyermani grown within biofilter. This result was similar to the first results on RHs, SMCs, and PDs keeping up with constant levels, and three SMCs did not show any significant difference on plant growth parameters. However, two biofiltered SMCs enhanced dry weights of the plants slightly than non-biofiltered SMC. Thus, the stability of this biofiler system keeping up major physical factors (SMC and PD) deserved to be adopted for designing an advanced integrated biofilter model in the near future.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.633-640
• /
• 2012

White light and compound light were found to be the ideal light sources for improving the functionality and ornamental value of indoor plants and reducing the cost of maintenance, but because compound light hinders people from recognizing the original color of plants and makes their eyes easily tired, white light was considered the optimal light satisfying all of the ornamental value, economic efficiency and functionality resulting from plant growth. On the other hand, in the results of examining physiological changes before and after treatment on fine dust PM10 and carbon dioxide removal capacity in a closed chamber under an artificial light source, the patterns of carbon dioxide and fine dust removal were similar among the treatment groups according to light condition, but according to plant type, the removal rate per unit leaf area was highest in $Spathiphyllum$ and lowest in $Dieffenbachia$. In the experiment on dust and carbon dioxide removal, the photosynthetic rate was over 2 times higher after the treatment, and the rate increased particularly markedly under compound light and white light, suggesting that the photosynthetic rate of plants increases differently according to light quality. These results show that light quality has a significant effect on the photosynthetic rate of plants, and suggests that plants with a high photosynthetic rate also have a high carbon dioxide and dust removal capacity. In conclusion, the photosynthetic rate of foliage plants increased under white and blue light that affect photosynthesis and the increased photosynthetic rate reduced carbon dioxide and fine dust, and therefore white and compound light were found to be the optimal light sources most functional and economically efficient in improving ornamental value and indoor air quality.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.55-55
• /
• 2020

This study investigated the growth and chlorophyll fluorescence reactions of three Ardisia genus grown under various indoor light intensity conditions with the aim of evaluating their suitability as indoor plants. Young seedlings of A. crispa (Thunb.) A.DC., A. pusilla DC., and A. japonica (Thunb.) Blume were used in the experiment. The plants were cultivated indoors for 10 weeks under different light intensities: 10, 50, 100, and 200 PPFD (μmol·m^-2·s^-1), and their growth was compared with that of plants cultivated in a greenhouse during the same period (mean value 236.8±20.4 PPFD at noon). Also, chlorophyll fluorescence analysis was investigated with a portable PAM fluorometer. The indoor plants were maintained at 12/12 h photoperiod, temperature at 25±1℃, and humidity at 55±3%. Irrigation frequency (once every three days) was the same for the indoors and the greenhouse. The results of growth in three Ardisia plants showed that almost all parameters except leaf number and chlorophyll content had similar levels regardless of light intensity. A. crispa and A. pusilla plants grown in 200 PPFD were investigated to have low chlorophyll contents. Meanwhile, chlorophyll fluorescence parameters differed based on light levels. In A. crispa, the Fv/Fm (0.77), DIo/RC (0.47) and Fm/Fo (4.77) parameters tended to be poor at 200 PPFD compared to those at other light intensities. Similarly, the DIo/RC, Fm/Fo, and Pi_Abs parameters of A. pusilla plant (200 PPFD) are 0.45, 4.48 and 2.42, respectively, which can be considered stress. The analysis of fluorescence in A. japonica showed that all parameters except ETo/RC had similar levels regardless of light intensity. The ETo/RC parameter was 0.49 and 0.72 in the control plants and plants 200 PPFD, respectively, which was lower than those in plants at other light intensities. Therefore, it seems that the relatively high light intensity acted as a stressor for Ardisia plants.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.103-108
• /
• 2005

It was aimed to promote as a material for interior landscape by validating Rumohra aristata, in an indoor environment, especially irrigation interval, medium composition and drainage at indoor. 1. The result of physico-chemical analysis of medium composition showed that porosity, pH and Ex-Ca, Ex-Mg and Ex-K were high with peatmoss: vermiculite: perlite(1:1:1) and water contents, organic matter content, total nitrogen and cation exchange capacity were high with sand: leaf mold(1:1). 2. Growth and indoor adaptability of Rumohra aristata were better with irrigation at 2 interval per week than irrigation at 7 interval per week regardless of drainage. 3. In the case of medium composition, of growth and indoor adaptability were higher with sud: leaf mold (1:1) than peatmoss: vermiculite: perlite(1:1:1). 4. Fronds fresh weight and dry weight decreased when irrigation interval increased and were higher with sand: leaf mold(1:1) than peatmoss: vermiculite: perlite(1:1:1) treatment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.1-5
• /
• 2008

In this study, batcher plant composition test and mock-up test were carried out to conduct comparison and analysis on flow behavior and strength properties of concrete at early age. As a result, it was found that slump and amount of air in batcher plant composition test reached the target range. As for compressive strength, composition using HESPC showed the most excellent strength development. In mock-up test which was carried out to find out the strength properties, two methods with specimen and core test body both revealed HESPC as the most excellent composition. However, strength estimation with ultrasonic survey presented less reliable data. As a result of the previously conducted indoor composition test and the mock-up test in this study, target performance of concrete at early age was 4day/cycle. It was found that the optimum conditions that meet the required strength, 5MPa/18hr and 14MPa/36hr in mullion and transom are; curing temperature above 15℃, W/B 45%, unit-water 165kg/㎥ and CHC cement.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2004.05a
• /
• pp.47-60
• /
• 2004

Higher plants can be valuable genetic assay systems for monitoring environmental pollutants and evaluating their biological toxicity. Two assays are considered ideal for in situ monitoring and testing of soil, airborne and aqueous mutagenic agents; the Tradescantia stamen hair assay for somatic cell mutations and the Tradescantia micronucleus assay for chromosome aberrations. Both assays can be used for in vivo and in vitro testing of mutagens. Since higher plant systems are now recognized as excellent indicators and have unique advantages over in situ monitoring and screening, higher plant systems could be accepted by regulatory authorities as an alternative first-tier assay system for the detection of possible genetic damages resulting from the pollutants or chemicals used and produced by industrial sectors. It has been concluded that potential mutagen and carcinogen such as the heavy metals among indoor air particulates, volatile compounds in the working places, soil, and water pollutants contribute to the overall health risk. This contribution can be considerable under certain circumstances. It is therefore important to identify the level of genotoxic activity in the environment and to relate it to the biomarkers of a health risk in humans. The results from the higher plant bioassays could make a significant contribution to assessing the risks of pollutants and protecting the public from agents that can cause mutation and/or cancer. The plant bioassays, which are relatively inexpensive and easy to handle, are recommended for the scientists who are interested in monitoring pollutants and evaluating their environmental toxicity to living organisms.