• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1256-1263
• /
• 2012

The present study covers the ultrasonic patterning process to replicate micro-patterns on a polymer substrate. The ultrasonic patterning process uses ultrasonic waves to generate frictional heat between an ultrasonic horn and the polymer substrate, from which the surface region of the polymer substrate is softened sufficiently for the replication of micro-patterns. The ultrasonic patterning process can divided into two categories according to the direction of vibration transmission: direct patterning and indirect patterning. The direct patterning uses a patterned horn, and the ultrasonic vibration is transferred directly from the patterned horn to the substrate. On the contrary, the indirect patterning process uses a plain horn, and the micro-patterns are engraved on a mold that is located below the substrate. Thus, the micro-patterns are replicated as an indirect manner. In this study, these direct and indirect patterning processes are compared in terms of the replication characteristics. Additionally, the possibility of double-side patterning is also discussed in comparison with the conventional single-side patterning process.

• 한국콘텐츠학회논문지
• /
• 제15권11호
• /
• pp.74-82
• /
• 2015

범죄는 시민들에게 범죄피해 발생으로 직접적인 피해를 미치기도 하지만 간접적인 영향을 통하여 범죄에 대한 두려움을 야기하여 생활에 영향을 주기도 한다. 범죄에 대한 두려움은 범죄피해자 뿐만 아니라 다수의 시민들에게 불안감을 형성하기 때문에 사회에 악영향을 미친다. 이러한 범죄에 대한 두려움을 제거하기 위하여 유발 원인을 찾는 선행연구들은 성별 연령 직업과 같은 인구사회학적 특성과 범죄의 직 간접 경험이 영향을 미친다고 하였다. 이 연구에서는 선행연구에서 나타난 결과를 바탕으로 물리적 환경과 폭력의 경험이 범죄에 대한 두려움에 미치는 영향을 복합적으로 살펴보았다. 분석 결과, 환경 무질서가 직접적인 폭력경험에 미치는 영향은 유의미하였으며, 간접적인 폭력경험 역시 유의미한 것으로 나타났다. 또한 무질서가 범죄에 대한 두려움에 미치는 영향 역시 유의미한 것으로 나타났다. 범죄에 대한 두려움에 대하여 미치는 영향을 비교해본 결과, 간접적인 폭력경험이 가장 큰 영향을 미치는 것으로 나타났으며, 그 다음으로 무질서, 직접적인 폭력경험이 순으로 나타났다. 이 연구는 범죄에 대한 두려움을 감소시키기 위하여 물리적 환경을 개선해야하는 것을 증명하였다.

• 한국동물위생학회지
• /
• 제13권1호
• /
• pp.80-89
• /
• 1990

The present study was conducted in order to get the relationship of heartworm, Dirofilaria immitis and eosinophils in blood of Jindo dogs. Blood samples were taken from 141( man 31, womam 110) of yellow, 44 ( man 17, woman27) of white Jindo dogs in Jindo area. The results obtained in this study were summarized as follows : 1. There were no significant differences of the hematological values in comparison with others reported values, but the mean corpuscular hemoglobin concentration and the number of eosinophils were high in comparison with other reported values. 2. The mean values of total white blood cell count(P<0.05), neutrophil(P<0.05) and monocyte(P< 0.05) were that the yellow dogs and a tendency toward fisher values than the white dogs, but no significant differences were observed. 3. Age-related differences were detected for the total erythrocyte count(P<0.05), hemoglobin content (P<0.001), PCV(P<0.001) and the number of eosinophils(P<0.001). 4. The direct and indirect eosinophil counts were increased with age, there were no significant differences of the values between two groups. 5. Dirofilaria immitis was found in 34(18.4%), increased with age and were relatively significant differences in areas of the 185 Jindo dogs. 6. Survey for hematological values of Dirofilaria immitis infected dogs with direct and indirect method, mean values of eosinophil were 2,788/ ${\mu}l,$ 3,021/ ${\mu}$l, respectively. They showed that eosinophil had a tendency toward higher values than others, but others were no significant differences.

• 대한영양사협회학술지
• /
• 제13권2호
• /
• pp.157-168
• /
• 2007

The purposes of this study were to measure the resting metabolic rate(RMR) of 30-40 year old women and to compare it with values predicted using published equations. Body weight, height and body fat of subjects were measured. RMR was measured by two indirect calorimeter(method 1 and method 2). RMR was predicted using various equations. Average height, weight and body fat(%) of subjects were 158.6cm, 59.1kg and 30.9%, respectively. The RMR(1621.2$\pm$301.5 kcal/day) measured by portable indirect calorimeter(method 2) was significantly higher than RMR(1447.4$\pm$223.6 kcal/day) measured by typical indirect calorimeter(method 1). Comparison of measured RMR with predicted RMRs suggested that there was a least difference in RMR predicted by equation of Cunningham. According to RMSPEs(Root Mean Squared Prediction Errors), equations of Cunningham and body surface area were found to predict measured RMR(by method 1) most accurately (within 239.1kcal/day and 232.9kcal/day, respectively). The fat free mass and fat mass - adjusted correlation showed that measured RMR(by method 1) had negative relationships with muscle mass(r = -0.873) and fat free mass(r = -0.866). The equations of Cunningham and body surface area provide relatively accurate estimates of RMR when determining energy needs of 30-40 aged women. There are needs for development of RMR predicted equations that are derived from large samples of Korean.

• 지능정보연구
• /
• 제23권2호
• /
• pp.19-38
• /
• 2017

본 연구는 사용자 평점 이외에 사용자 간 직접 간접적 신뢰 및 불신 관계 네트워크의 분석 결과를 추가로 반영한 새로운 하이브리드 협업필터링(Collaborative filtering, CF) 추천방법을 제안한다. 구체적으로 사용자 간의 유사도를 계산할 때 사용자 평가점수의 유사성만을 고려하는 기존의 CF와 다르게, 사용자 신뢰 및 불신 관계 데이터의 사회연결망분석 결과를 추가적으로 고려하여 보다 정교하게 사용자 간의 유사도를 산출하였다. 이 때, 사용자 간의 유사도를 재조정하는 접근법으로 특정 이웃 사용자가 신뢰 및 불신 관계 네트워크에서 높은 신뢰(또는 불신)를 받을 때, 추천 대상이 되는 사용자와 해당 이웃 간의 유사도를 확대(강화) 또는 축소(약화)하는 방안을 제안하고, 더 나아가 최적의 유사도 확대 또는 축소의 정도를 결정하기 위해 유전자 알고리즘(genetic algorithm, GA)을 적용하였다. 본 연구에서는 제안 알고리즘의 성능을 검증하기 위해, 특정 상품에 대한 사용자의 평가점수와 신뢰 및 불신 관계를 나타낸 실제 데이터에 추천 알고리즘을 적용하였으며 그 결과, 기존의 CF와 비교했을 때 통계적으로 유의한 수준의 예측 정확도 개선이 이루어짐을 확인할 수 있었다. 또한 신뢰 관계 정보보다는 불신 관계 정보를 반영했을 때 예측 정확도가 더 향상되는 것으로 나타났는데, 이는 사회적인 관계를 추적하고 관리하는 측면에서 사용자 간의 불신 관계에 대해 좀 더 주목해야 할 필요가 있음을 시사한다.

• Archives of Plastic Surgery
• /
• 제35권1호
• /
• pp.48-55
• /
• 2008

Purpose: We measured linear distances, angles and inclinations on the cast models of the noses, and compared these indirect measurements with the direct measurements obtained from the nose in order to validate the accuracy of the indirect anthropometry using the cast model. Methods: Subjects were 50 males and 50 females, medical students in twenties(mean 27.1 years). Cast models were made from the alginate impression material and the plaster. In direct anthropometry, 16 linear, 7 angular, and 2 inclination measurements between 11 landmarks on the nose were obtained using sliding caliper, spreading caliper, and fabric tape measure. At the same time, the same measurements were obtained from the cast models of the same people. Total 25 measurements were compared, and tested by the independent t-test of SPSS. Results: The standard values of Korean nose in twenties were obtained. 24 measurements except the columellar labial angle were not statistically different between the indirect anthropometry and the direct anthropometry. Conclusion: Indirect anthropometry on the cast model of the nose revealed no significant difference from the anthropometric measurement statistically, accounting for 24 in 25 measurements(96%). There are two possible reasons that caused the difference of columellar labial angle between direct and indirect anthropometry. First, the columellar labial angle could be decreased by protrusion of the lips which resulted from contracting mouth in which an drinking straw had been applied on the mouth corner for patients' respiration during making cast model. Second, it is generally known that the columellar labial angle could be measured larger when soft tissues were pressed by protractor in direct anthropometry. Using a drinking straw with greater diameter, and scheming respiration through the nostrils that patients don't feel discomfort, the more accurate data would be obtained from the indirect anthropometry using the cast models of the noses.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.18-23
• /
• 2007

Purpose: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. Methods: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. Results: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. Conclusion: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.

• Imaging Science in Dentistry
• /
• 제37권4호
• /
• pp.205-209
• /
• 2007

Purpose: To determine the physical properties of a newly developed cone beam computed tomography (CBCT). Materials and Methods: We measured and compared the imaging properties for the indirect-type flat panel detector (FPD) of a new CBCT and the single detector array (SDA) of conventional helical CT (CHCT). Results: First, the modulation transfer function (MTF) of the CBCT were superior to those of the CHCT. Second, the noise power spectrum (NPS) of the CBCT were worse than those of the CHCT. Third, detective quantum efficiency (DQE) of the indirect-type CBCT were worse than those of the CHCT at lower spatial frequencies, but were better at higher spatial frequencies. Although the comparison of contrast-to-noise ratio (CNR) was estimated in the limited range of tube current, CNR of CBCT were worse than those of CHCT. Conclusion: This study shows that the indirect-type FPD system may be useful as a CBCT detector because of high resolution.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.25-30
• /
• 2014

In this paper, the heat transfer coefficient and pump consumption power of indirect refrigeration system using $CO_2$ as a secondary refrigerant were investigated experimentally. First, from the comparison of pump consumption powers of existing brines(EG, PG, EA etc.) and $CO_2$ as secondary refrigerants at the same experimental conditions, PG and $CO_2$ show the highest and lowest power, respectively. Second, the heat transfer coefficient of $CaCl_2$ is the highest, but PG is the lowest among other secondary refrigerants. From the above results, it is confirmed that $CO_2$ as the secondary refrigerant has excellent characteristics when comparing to existing brines. Thus, it is concluded that $CO_2$ is applicable as the secondary refrigerant of indirect refrigeration system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.411-418
• /
• 2002

In domestic road construction sites, the compaction control based on strength are widely performed through the direct method with high accuracy, such as Plate Loading Test or Field CBR test. It is impossible to manage all construction sites using the direct method because the direct method requires heavy reaction loads and long measurement time. Therefore, it is necessary to apply the indirect method that could control the relative density of construction sites on the whole. Indirect methods, such as Cone Penetration Test and Fall Cone Test, require extra time for data analyzing and fixed area for test device. In this paper, the field applicability of Soil Impact Hammer (SIH) was investigated comparing with the results of field measurement tests and laboratory compaction tests. SIH developed by Japan Construction Administration and Asanuma Ltd., is a kind of indirect methods for compaction checking. According to the results of SIH performed in domestic road construction site, the subgrade reaction modulus obtained from SIH are similar to that from Plate loading tests in the range of 10 to 40. In comparison with laboratory compaction test, similar compaction line are shown in the dry side of optimum moisture contents.