• Laser Solutions
• /
• v.15 no.4
• /
• pp.12-15
• /
• 2012

On behalf of the existing semiconductor process, the electronic devices to low-cost mass production to mass print the way, the research for development of roll-to-roll printing process is actively underway. This study was performed in about the research on the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser imprinting technology was used to create printable roll, and after coating copper on the surface of steel and thereon after coating polymer, after removing the polymer on the surface of roll, the printable roll was made. The laser system and roll feeder system were constructed and control program was developed. We has found the optimal conditions to perform laser patterning experiments using a system developed and We can make the minimum line width of 18 ${\mu}m$.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.9
• /
• pp.217-227
• /
• 2022

With the aim of examining the effects of implementing international financial reporting standards (IFRS) on teaching accounting and auditing at universities and colleges in Vietnam, a case study was conducted at 30 universities, colleges, and 208 lecturers in Vietnam. Next, the study employed the structural model analysis method by PLS_SEM software to process and analyze the collected data. The research results show that: (1) There are eight factors that affect how IFRS is applied to teaching, including the training program, (ii) teaching staff, (iii) IFRS application regulations, (iv) related party requirements, (v) faculty/school administrators, (vi) teaching aids, (vii) IFRS teaching methods, and (iii) students; (2) there are three factors that affect the quality of teaching staff, including applying IFRS to teaching at the university and colleges, (ii) Regulations on the application of IFRS, (iii) Requirements from related parties. At the same time, the study also shows that, regarding the indirect relationships, applying IFRS to teaching does not play an intermediary role in these relationships. However, at the 10% significance level, it was found that there is an indirect relationship between regulations on the application of IFRS by the Ministry of Finance and the quality of teaching staff through the variable applying IFRS to teaching.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.5
• /
• pp.669-683
• /
• 2012

The water supply pipes are buried across wide range of areas, so it is hard to spot them using excavation and takes a large amount of expense. Thus, there is a high risk for direct research and application, accompanying many difficulties in implementation of them. Therefore, it is more economical and convenient to use indirect evaluation variables than direct evaluation of the buried pipes in assessing the degree of pipe deterioration. To assess the degree of pipe deterioration using the indirect evaluation variables, it should be done first to identify how and to what extent they affect the degree of deterioration. This study measured the evaluation variables for pipe deterioration using the pipe endoscope and analyzed the measurement results and the degree of impact on the pipes. In addition, this study attempted to evaluate the adequateness of the pipe deterioration evaluation using the indirect variables based on the analysis results. The evaluation variables measured through the pipe endoscope were the thickness of sediments, size of scale, degree of desquamation and condition of connections. For the indirect evaluation variables, the data such as the property data from GIS pipe network map as well as the material, diameter, age and pipe lining material of the pipe, road type, leakage frequency, average water velocity and water pressure using the leakage repair records was collected. Using the collected data, this study comparatively analyzed the indirect evaluation variables for the degree of pipe deterioration and the results from the pipe endoscope to choose appropriate variables for pipe deterioration evaluation and calculated the weights of the indirect variables on the degree of deterioration. The results showed that the order of the impact of indirect variables on deterioration was pipe age > pipe lining material > road type > leakage frequency > average water velocity with their weights of 0.45, 0.20, 0.15, 0.10, and 0.10, respectively. Conclusively, the results suggest that the measures of sediment thickness, scale size, degree of desquamation and condition of connections are appropriate for the evaluation of pipe deterioration and sufficient for the analysis of the impact of the indirect variables on deterioration.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.569-576
• /
• 2002

This study was peformed to evaluate the interfacial shear bond strength of base (direct and indirect) and repair composites with aging and surface treatment methods. Direct composite resin specimens ($Charisma^{\circledR}$, Heraeus Kulzer, Germany) were aged for 5 min, 1 hour, 24 hours, and 1 week in $37^{\circ}C$ distilled water before surface treatment, and then divided into five groups Group 1, grinding; Group 2, grinding and application of bonding agent, Group 3, grinding, etching with 37% phosphoric acid for 30sec, and application of bonding agent, Group 4, grinding, etching with 37% phosphoric acid for 30sec, silane treatment, and application of bonding agent ; Group 5, grinding, etching with 4% hydrofluoric acid for 30sec. silane treatment, and application of bonding agent. Indirect composite resin specimens ($Artglass^{\circledR}$, Heraeus Kulzer, Germany) were aged for 1 week in $37^{\circ}C$ distilled water and divided into seven groups Group 1 - Group 5, equal to Charisma specimens; Group 6, grinding, etching with 37% phosphoric acid for 60sec, silane treatment, and application of bonding agent; Group7, grinding, etching with 4% hydrofluoric acid for 60 sec, silane treatment, and application of bond-ing agent. The repair material($Charisma^{\circledR}$) was then added on the center of the surface (5 mm in diameter. 5 mm in height). The shear bond strength was tested and the data was analyzed using one-way ANOVA and the Student- Newman-Keuls test. The following conclusions were drawn. 1 The shear bond strength of $Charisma^{\circledR}$ specimens aged for 1 hour was significantly higher in Group 2 and Group 5 than in Group 1 (p<0.05), and that of $Charisma^{\circledR}$ specimens aged for 1 week was signifi-cantly higher in Group 3 and Group 5 than in Group 1 (p<0.05). No significant difference was found in the bond strength of specimens aged for 5 min and 24 hours. 2. In Group 2 of the $Charisma^{\circledR}$ specimens, there was significant difference between the bond strength of 24 hours and that of 1 week (p<0.05). 3. In Group 4 of the $Charisma^{\circledR}$ specimens, the shear bond strength of specimens aged for 24 hours was significantly higher than the others(p<0.05) 4. There was no significant difference between the shear bond strength of the $Artglass^{\circledR}$ specimens, 5. Most of the $Charisma^{\circledR}$ specimens showed cohesive fractures. Artglass^{\circledR}$ specimens that were etched with acid (phosphoric or hydrofluoric) for 30 sec showed more cohesive fractures.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.5
• /
• pp.420-423
• /
• 2020

This study proposes an indirect constant voltage control algorithm for hybrid solid-state transformers (HSSTs) by using primary side information. Considering the structure of HSSTs, measuring voltage and current information on the primary side of a transformer is necessary to control the converter and inverter of the power converter. The secondary side output voltage is measured to apply the conventional secondary side constant voltage control algorithm, and thus, the digital control board requires the same rated insulation voltage as that of the transformer. To solve this problem, the secondary voltage of the transformer obtained from the tap voltage is used. Moreover, output voltage decreases as load increases because the proposed indirect constant voltage control scheme does not consider the cable impedance between the secondary output terminal and the load. This study also proposes a technique for compensating the secondary output voltage by using the primary current of the transformer and the resistance value of the cable. An experiment is conducted using a scale-down HSST prototype consisting of a 660 V/220 V tap transformer. The problem of the proposed indirect constant voltage control strategy and the improvement effect due to the application of the compensation method are compared using the derived experimental results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.280-287
• /
• 2008

For the reduction of common-mode noise level in Indirect-contact ECG (IDC-ECG) measurement a driven-right-leg grounding method was a lied to the IDC-ECG. Because the IDC-ECG does not require any direct contact between the electrodes and the human skin. it is adequate for un-constraining long-term ECG measurement at home and its various applications are now under development. However, larger 60 Hz noise induced by power line a ears in IDC-BCG than in conventional ECG, that is a restriction of IDC-ECG a application. In this study, the driven-right-leg ground which has been used in conventional direct-contact ECG, was adapted to the IDC-ECG measurement by feedback of the inversion of amplified common-mode noise to the body through the conductive fertile laid on the chair seat By this study, indirect-contact driven-right-leg ground was developed and it was shown to work stably. It was shown that the level of 60Hz power line noise was reduced to about -40 dB when the driven-right-leg gain was 1000. This study shows that we can extend the upper limit of the frequency band of IDC-ECG to 100Hz from 30Hz which is conventional upper limit in IDC-ECG, and we can raise the ground impedance between the body and conductive textile. So it is expected that the application area of the IDC-ECG will be extended by the results of this study.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.150-156
• /
• 2004

Though the concept of Life-Cycle Cost (LCC) itself is not new, its effectiveness for planning, design, rehabilitation and maintenance/management of civil infrastructures is becoming increasingly recognized. For the decision problems as in the case of the LCC of plant facilities, equipments, bridge decks, pavements, etc., the Life-Cycle Cost Analysis (LCCA) is relatively simple, and thus its practical implementation is rather straightforward. However, when it comes to major infrastructures such as bridge, tunnels, underground facilities, etc., the LCCA problem becomes extremely complex because lack of cost data associated with various direct and indirect losses, and the absence of uncertainty data available for the assessment as well. As a result, the LCC studies have been largely limited only to those relatively simple LCCA problems of planning or conceptual design for making decisions. Accordingly, in the recent years, the researchers have pursued extensive studies on the LCC effectiveness mostly related to LCC models and frameworks for civil infrastructures. Moreover, recently the demand on the practical application of LCC effective decisions in design and maintenance is rapidly growing unprecedently in civil engineering practice. Indirction cost is very important on LCC formulation. But that is very difficult and complicate the estimation every LCC. The objective of this paper is to suggest efficient regression model for the estimation of indirect cost approach to the practical application of LCC for the design and rehabilitation of civil. infrastructures considering traffic, traffic network, detour condition, and workzone condition. In this paper, it performed the sensitivity analysis and correlation analysis of parameter for development of regression model of inflection cost.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.637-648
• /
• 2007

This paper presents a sensor fusion method based on indirect Kalman filter(IKF) for error compensation of low-cost inertial sensors and its application to the determination of attitude and position of small flying robots. First, the analysis of the measurement error characteristics to zero input is performed, focusing on the bias due to the temperature variation, to derive a simple nonlinear bias model of low-cost inertial sensors. Moreover, from the experimental results that the coefficients of this bias model possess non-deterministic (stochastic) uncertainties, the bias of low-cost inertial sensors is characterized as consisting of both deterministic and stochastic bias terms. Then, IKF is derived to improve long term stability dominated by the stochastic bias error, fusing low-cost inertial sensor measurements compensated by the deterministic bias model with non-inertial sensor measurement. In addition, in case of using intermittent non-inertial sensor measurements due to the unreliable data link, the upper and lower bounds of the state estimation error covariance matrix of discrete-time IKF are analyzed by solving stochastic algebraic Riccati equation and it is shown that they are dependant on the throughput of the data link and sampling period. To evaluate the performance of proposed method, experimental results of IKF for the attitude determination of a small flying robot are presented in comparison with that of extended Kaman filter which compensates only deterministic bias error model.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.223-235
• /
• 2003

An indirect or supplementary approach is proposed for determining the parameters of the Clark's model in order to improve existing defect in estimating the parameters. The gamma-distribution type function is employed to represent the Clark's model, which takes the same form as the Nash's model, so that parameter estimation is not difficult since it can be performed with a simple optimization process. Analytic forms of Clark's models parameters are introduced using parameters of the proposed methodology to give traditional form of Clark's. An application to a watershed has shown that the proposed approach can preserve the properties of observed data. Based the application, the new approach is recommended as an alternative to the existing parameter estimating methodology.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2611-2613
• /
• 2002

본 논문에서는 전력선 통신 채널의 간접 잡음 측정에 대한 연구를 하였다. 주위 환경에 의한 Noise 및 여러 통신매체에 의한 방해전파에 의해 전력선 통신 채널은 송신 측의 고출력 요구와 가능한 전력선 통신의 대역폭이 감소하는 악화된 통신환경을 보여 준다. 이러한 Noise를 측정하는 방법은 Coupling Capacitor를 이용한 직접 측정 방식과 이동 측정 장치를 이용한 간접 측정 방식이 있다. 전자는 광범위한 측정지역과 측정장비의 설치 등에서의 번잡함으로 효과적인 Noise 측정이 어렵다. 본 논문에서는 두 가지 방식의 Noise 측정 결과의 비교 및 검토를 통해 이동 측정 장치를 이용한 방식의 장점과 보완할 점을 검토였으며, 특히 직접 측정 방식과의 결과 값의 차이를 보상할 수 있는 상관관계 분석의 필요성을 고찰하였다.