• The Korean Journal of Community Living Science
• /
• v.24 no.3
• /
• pp.391-397
• /
• 2013

This study was conducted to define the characteristics of the fan according to the bed depth of rough rice for the silo used in South Korea. In this study, the characteristics like air flow resistance and air flow rate of the fan were investigated for an independent blowing system with 1 fan and the serial blowing system with 2 fans. In the experiment, the depth of rough rice was determined by 0, 1, 2, 3.2 and 4.5 m for an independent blowing system and the depth of rough rice was 4.5 m for the serial blowing system. The air flow resistances of the blowing fan and the suction fan in an independent blowing system were 55 mmAq and 88 mmAq respectively. In addition, the air flow resistance of the serial blowing system was 61% lower than the blowing fan and 28% lower than the suction fan of the independent blowing system. The air flow rates of the blowing fan and the suction fan in the serial blowing system were 516 $m^3/min$, 570 $m^3/min$, respectively. The former was 22% higher than the blowing fan while the latter was 29% higher than the suction fan in the independence blowing system. In other words, the serial blowing system was superior to the independent blowing system in blowing characteristics because the air flow rate was lower and air flow resistance was higher than the independent blowing system. However, the fan power consumption of the serial blowing system was more than 100% comparing with the independent blowing system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.5
• /
• pp.710-719
• /
• 2001

Several amino acid transport systems in mammary gland have been characterized during the last few years. These systems may be divided into two broad categories based on whether they are sodium-dependent or $Na^{+}$-independent, and each of these categories is subdivided into 3 groups depending on whether the systems prefer zwitterionic, cationic or anionic substrates. The zwitterion preferring transport processes in mammary gland are $Na^{+}$-dependent system A and $Na^{+}$-independent systems L and T. System $y^{+}$ is a $Na^{+}$-independent transporter of cationic amino acids and $X_{AG^{-}}$ is a $Na^{+}$-dependent system for anionic amino acids. A ($Na^{+}+Cl^{-}$)-dependent system, selective for $\beta$-amino acids has been reported in rat mammary tissue. In addition, there is yet another class of transporters that have still broader specificity. The $Na^{+}$-dependent systems $BCl^{-}$-dependent and $BCl^{-}$-independent and $Na^{+}$-independent system $y^{+}L$ have been reported to mediate the transport of zwitterionic as well as cationic amino acids. Each system has been characterized with respect to its substrate specificity, affinity, kinetics and ion-dependence. Transport of amino acids by mammary tissue is regulated by i) the intracellular substrate concentration, ii) lactogenic hormones and iii) milk stasis. Four of the above transport systems (i.e. A, L, $y^{+}$ and $BCl^{-}$-independent) are up-regulated by lactogenic hormones (insulin, cortisol and prolactin) in mammary gland.

• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.1-29
• /
• 2004

This paper aims to understand the points which the Board of Directors of the National Federation of Fisheries Cooperatives System has proposed, and to find some improvement. This Fisheries Cooperatives previously had a single board system operating two small board rooms which became independent within the two sectors of credit and .provision in addition to the existing board of directors. This is a very unique board of directors system which is not found in cooperatives in our country nor in the business world. This change of the board of directors of the Fisheries Cooperatives is ascribed to the reorganization of the system into a completely independent division system, which operates business separately based on each sector as opposed to the previous multiple cooperatives system. However, a plural board of directors system does contribute to the improvement of managerial efficiency by strengthening the self-control of each independent business section, but deepens conflicts between its internal organizations, and brings about a reverse function which might deteriorate both the controlling power of a systematic organization and the coordinating power between sectors. This paper made an analysis of acceptors' attitudes toward the board of directors of the fisheries cooperatives system by regulating all the staff directly related to the operation of the board of directors of the fisheries cooperatives system as a group of acceptors and by selecting one hundred and fifty persons among the staff as a sample. The inquiry into acceptors' attitudes was made using questionaries, and the data for this investigation was processed and analyzed using a statistical method. The contents of this paper are composed of I. an introduction, II. the findings of the questionary investigation, III. the overall opinion for the improvement of the board of directors system, and IV. a summary and conclusion.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.1
• /
• pp.56-61
• /
• 2000

Majority of industrial robots are controlled by a simple independent joint control of joint actuators rather than complex controllers based on the nonlinear dynamic model of the robot manipulator. In this independent joint control scheme, the performance of actuator control is influenced significantly by the joint disturbance torques including gravity, Coriolis and centrifugal torques, which result in the trajectory tracking error in the joint control system. The control performance of a redundant manipulator under independent joint control can be improved by minimizing this joint disturbance torque in resolving the kinematic redundancy. A 3 DOF planar robot is studied as an example, and the dynamic programming method is used to find the globally optimal joint trajectory that minimize the joint disturbance torque over the entire motion. The resulting solution is compared with the solution obtained by the conventional joint torque minimization, and it is shown that joint disturbance can be reduced using the kinematic redundancy.

• Current Optics and Photonics
• /
• v.8 no.5
• /
• pp.456-462
• /
• 2024

We propose a novel fade-free optical fiber interferometric vibration sensor using a simple setup with a 90° optical hybrid. The interferometer consists of all-optical components without the phase modulators and complex demodulation processes that were previously used to compensate for signal fading induced by phase bias change. Fade-free output was successfully obtained by in-phase and quadrature detection with a π/2 phase shifting scheme. Theoretical analysis and measurement results showed that the proposed interferometric vibration sensor operates independently of the phase bias state of interfering waves.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.349-355
• /
• 2017

Failures of railway systems can result in train delays or accidents, and therefore high reliability is required to ensure safety of railway systems. To improve reliability, railway systems are designed with redundant systems so that the standby system will continue to function normally even if the primary system fails. Generally, overall system reliability can be evaluated by the reliabilities of the parts of the whole system and the reliability of the redundant system considering common failures in case of each system is not conform physical, functional and process independent. In this study, the reliability of the hot-standby sparing system is analyzed the independent systems and dependent systems with common failures. The reliability for the standby system can be effectively analysed using Markov models, which can model the redundant configuration and the state transition.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.4
• /
• pp.145-151
• /
• 2005

The synthetic breaking test method was developed to evaluate the breaking performance of ultra high-voltage circuit breaker and made up of two independent circuits; current source circuit and voltage source circuit. In application of this test method, it is necessary to extend the arc of the test breaker. So, the new re-ignition system using VTGS (Vacuum Triggered Gap-Switch) was constructed to improve the efficiency and reliability of this test. In this re-ignition system, VTGS operates in high vacuum state of $5{\time}10^{17}$torr and control system consists of the triggering device and the air M-G (Motor-Generator). This re-ignition system showed the operating characteristics, such as delay time ($t_d$) and jitter time ($t_j$ not exceeding 5us and 1us respectively, and had the operating voltage of $25\~150kVdc$ at the gap distance of 24mm.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.629-634
• /
• 2024

The Korea Research Institute of Ships and Ocean Engineering (KRISO) has developed a test module that can vertically ascend and descend with a buoyancy engine to verify the performance of the developed buoyancy engine. The independent test module has been tested in the Ocean Engineering Basin(C.M.Lee et al., 2023). After that, more tests were performed in the Deep Ocean Engineering Basin and at sea. In the 50-meter depth pit test of the Deep Ocean Engineering Basin, there were no problems with the ascent and descent operations, but the buoyancy engine was not properly maintained due to various problems in the independent test module, resulting in a difference between the calculated results using the solution of the equations of motion and the actual measurement results. The East Sea test was conducted at a depth of approximately 110 meters north-east of Pohang, with a dive to 100 meters. The difference between the pressure sensor value and the calculated value was observed, but after checking the results of the underwater position tracking device(USBL, Ultra Short Base Line system), it was estimated that the difference was caused by the influence of the current.

• Communications for Statistical Applications and Methods
• /
• v.29 no.2
• /
• pp.151-160
• /
• 2022

The total system is composed of the main system (MS) and the failure detection equipment (FDE) which detects failures of MS. The analysis of system reliability is performed when the failure of FDE is possible. Several repair policies are considered to determine the order of repair of failed systems, which are sequential repair (SQ), priority repair (PR), independent repair (ID), and simultaneous repair (SM). The states of MS-FDE systems are represented by Markov models according to repair policies and the main purpose of this paper is to derive the system availabilities of the Markov models. Analytical solutions of the stationary equations are derived for the Markov models and the system availabilities are immediately determined using the stationary solutions. A simple illustrative example is discussed for the comparison of availability values of the repair policies considered in this paper.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.623-630
• /
• 2010

This paper presents the implementation and characteristic analysis of a drive system for a three-phase permanent magnet motor with independent excitation winding that is applicable for electric bicycles. The design features improves the phase current waveform, output power, and torque by using advance angle control. This adjusts the phase angle of each phase current in relation to back EMF. In addition, a DC-side PI current control is performed through PWM generation circuit using a low-cost one-chip microcontroller and a CPLD chip, resulting in reduced system costs. Finally, the validity of this control scheme for driving electric bicycles and output/torque improvement characteristics are verified through analysis and experimental results.